Cast Iron Exhaust Fittings

Exhaust adapter with gaskets. Converts newer 3.0 Liter 181 Cubic inch engines exhaust port configuration to the older style exhaust manifold. Allows new engine to replace older engine and use old...

80° Exhaust Elbow 3" x 2-3/8" Cast Iron

Cast Iron 3" X 3" X 90° Exhaust Elbow used for marine wet exhaust systems. Hose ID (A) 3" Hose ID (B) 3" C to E (C) 4-1/2" C to E (D) 4-1/2" Angle Degree 90°

USED ON THE LARGER SQUARE STYLE OSCO MANIFOLDS TO ATTACH A GENERIC RISER OSCO #: RB

END PLATE OSCO THREADED 2.5 NPT FOR LOG STYLE MANIFOLDS. Osco made two sizes of the log style manifold. The smaller was the "A" Series and the other "B". This fits the B series. The plate is 4-3/16...

Hose Size: 4" x 4" x 4" Cast Iron Exhaust Tee Fitting with two 4 Inch Inlets and one 4 Inch outlet. A (Hose ID) 4" B (Hose ID) 4" C (Hose ID) 4" D (Overall Width) 9" E (Overall Length) 6-1/2"

Item # Hose I. D. (A) Hose I. D. (B) Hose I. D. (C) Overall Length (D) Weight 40ec300300 3 in 3 in 3 in 9-1/2 in 7.00 lb

Powder coated gray iron Item # Hose I. D. (A) Hose I. D. (B) Hose I. D. (C) Overall Length (D) Weight 40EC300400 3 in 3 in 4 in 9-1/2 in 8.00 lb

Item # Hose I. D. (A) Hose I. D. (B) Hose I. D. (C) Overall Length (D) Weight 40ec300500 3 in 3 in 5 in 9-1/2 in 8.00 lb

Item # Hose I. D. (A) Hose I. D. (B) Hose I. D. (C) Overall Length (D) Weight 40ec400500 4 in 4 in 5 in 13-1/4 in 18.00 lb

3" X 3" 80° Cast Iron Exhaust Elbow

This item is no longer manufactured A Cast Iron Exhaust Elbow that is 4.0" X 4.0" X 90°. It can be used for a custom application, or replace an existing one.

Cast Iron 3" X 3" X 20° Exhaust Elbow Hose ID (A) 3" Hose ID (B) 3" C to E (C) 4-1/4" C to E (D) 4-1/4" Angle Degree 20°

Exhaust Elbows Grey Iron Hose ID (A) 3" Hose ID (B) 3" C to E (C) 3" C to E (D) 3" Angle Degree 45°

Cast Iron 4" X 4" X 5" 90° Exhaust Elbow use for marine wet exhaust systems. Hose ID (A) 4" Hose ID (B) 4" C to E (C) 5" C to E (D) 5" Angle Degree 90°

Cast Iron 4" X 4" X 9" 90° Exhaust Elbow use for marine wet exhaust systems. Angle Degree 90°

Exhaust Elbow Tube for Ford 5.8L 351 cid Small Block V8 Carbureted engines. Used in converting Log Style manifolds to Center Rise manifolds Cast Iron Replaces OMC original equipment part # 3853386

2-3/8" to 3" exhaust hose adapter

Hose Size: 4" x 4" x 5" Cast Iron Exhaust Tee Fitting with two 4 Inch Inlets and one 5 Inch outlet. A (Hose ID) 4" B (Hose ID) 4" C (Hose ID) 5" D (Overall Width) 9-3/8" E (Overall Length) 6-1/2"

Cast Iron Exhaust Tee Fitting with two 3 Inch Inlets and one 4 Inch outlet. A (Hose ID) 3" B (Hose ID) 3" C (Hose ID) 4" D (Overall Width) 7-13/16" E (Overall Length) 6-1/4"

4" X 4" X 5" Cast Iron Y Fitting

Tee Fitting 4" X 4" X 4" for Marine wet exhaust systems. Made of cast Iron.

4" X 4" X 5" Tee Fitting