Raw Water Pumps and Accessories

Finally a reasonably priced raw water replacement for Mercruiser applications. Can be used for V Belt or Serpentine Belt (with additional pulley...

Crankshaft mounted Raw Water Pump used on raw water and fresh water cooled GM 305, 350, 454 CID V8 and Ford 302, 351 CID V8 Engines Fits...

Raw Water Pump for Crusader and Pleasurcraft 8.1L V8. Bronze Body, 1-1/4" Hose Ports, Full Cam, Neoprene Impeller, Lip Type Shaft Seal, Crankshaft...

Raw Water Pump Genuine Crusader Part # RA057032 Built by Sherwood for Crusader original equipment part Cools GM 6.0L V8 Crusader Uses Crusader #...

Impeller Kit with O-Ring Fits 5.7L, 6.0L and 8.1L models with serpentine belt driven water pumps

Jabsco Pedestal pump for engine cooling, washdown, circulation and other general purposes. Corrosion resistant bronze. Stainless steel shaft....

Crank Mounted Raw Water Pump Bracket Kit Used on Big Block GM V8 Used when adding a crank-mounted pump to a new installation. Fits Mercruiser, Marine...

Crank Mounted Raw Water Pump Bracket Kit Used on Small Block GM V8 Used when adding a crank-mounted pump to a new installation. Fits Mercruiser,...

"Arial, Helvetica, Sans-serif" size=" 1" color="black">Crank Mounted Raw Water Pump Bracket Used on Small Block GM V8 Used when adding a...

F.A.Q. (Frenquenty Asked Questions) for Pleasurecraft

This Raw Water Pump is for PCM (Pleasure Craft Marine)Ford small block 302 5.0 Liter and 351 5.8 Liter. Uses SHE09959K Impeller Kit Data Sheet (PDF)

Impeller Kit used on a 5/8 Keyed Shaft. Fits most Sherwood water pumps with a 1 inch Inside Diameter water hose. Fits SHED55, SHED60 (2 Required),...

This Impeller Kit fits most Sherwood raw water pumps with a 1-1/4" outlet hose size The impeller is keyed 3/16" and fits a 5/8" shaft with a Diameter...

Major Overhaul Kit for PLERA057007 raw water pump. Includes Seal Cam Bearing and impeller with gasket.

Mounting Bracket for 1-1/4" Sea Water Strainer Provides a sturdy mounting harness for Sherwood line strainers.  Unique design enables easy...

Mounting Bracket for 1" Sea Water Strainer Provides a sturdy mounting harness for Sherwood line strainers.  Unique design enables easy trouble...

Seawater Strainer with two 1 Inch NPT Hose Ports and 20 Mesh Screen Offers the following advantages: Full Flow Filtering with Ultra Low Pressure...

Seawater Strainer with two 1-1/4 Inch NPT Hose Ports and 20 Mesh Screen Offers the following advantages: Full Flow Filtering with Ultra Low Pressure...

Seawater Strainer with two 1-1/2 Inch NPT Hose Ports and 20 Mesh Screen Offers the following advantages: Full Flow Filtering with Ultra Low Pressure...

Major Repair Kit for Sherwood Raw Water Pumps Fits models: G3, G4, G5, G5-1, G7, G7B, G8, G26, G45-1, G45-2, G46, G50, G55-2, G56, G85, H-85, K90,...

Sea Water Pump for Pleasurecraft PCM 302 and 351 Ford based engines. Includes pulley as shown. Used for either rotation engine. Replaces #RA057007

Raw Water Pump for GM PCM V8s. Uses Sherwood # 10615K Impeller Kit or Sherwood # 23977 Major Repair Kit Data Sheet (PDF)

Raw Water Pump for Crusader XL Series Engines with a V-Belt Driven Raw Water Pump. Fits all XL models with a V-Belt Driven Raw Water Pump. This item...

Crankshaft mounted Raw Water Pump used on raw water and fresh water cooled GM 305, 350, 454 CID V8 and Ford 302, 351 CID V8 Engines Fits...

Sea Water Pump fits Pleasurecraft 8.1L V8 GM Replaces Sherwood # P109 & PCM original equipment part # RA057028

Sea Water Pump fits John Deere RE45459 and RE45458 Series engines. Replaces Sherwood P1711

Impeller Kit with O-Ring Fits Crusader and some PCM: 5.7L, 6.0L and 8.1L models with serpentine belt driven water pumps Replaces Crusader: RP061022...

Water Pump Gasket for Big Block GM V8 engines: GM 454 CID 7.4L Big Block V8 GM 502 CID 8.2L Big Block V8 GM 427 CID 7.0L Big Block V8  Used in...