 |  |
 Nobody Beats Our Deal
|
177 Fulford Dr.
Harkers Island, NC 28531
(252) 504-3355
Categories
- Mercruiser Sterndrives
- Mercruiser Inboards
- OMC Sterndrives
- OMC Inboards
- |_ Controls and Steering
- |_ Cooling System
- |_ Electrical System
- |_ Engine System
- |_ Exhaust System
- |_ Exhaust Manifold Kits
- |_ Exhaust Bellows
- |_ Gaskets Mount Kits Ftgs.
- |_ Manifolds
- |_ Risers Elbows and acces.
- |_ Fuel System
- |_ Hoses
- |_ Propellers
- |_ Service Manuals
- |_ Specialty Tools
- |_ Zincs Anodes
- Detroit Diesel
- Volvo Penta Sterndrives
- Volvo Penta Inboards
- Crusader Inboards
- Pleasurecraft (PCM) Inboards
- Chris Craft Inboards
- Chrysler Inboards
- Marine Power Inboards
- Engines (New & Remanufactured)
- Indmar Inboards
- Detroit Diesel Parts
- Volvo Penta Diesel Inboards
- Yanmar Diesel Inboards
- Caterpillar Diesel Inboards
- Cummins Diesel Inboards
- Outboard Parts
- Personal Water Craft
- All Applications
- Propellers
- Diesel Engines
- Used Engines
- Used Items
- Marine Transmissions and Parts - Borg Warner Velvet Drive - ZF Hurth - Paragon
- Fishing Tackle
- Decals and Stickers
- T & H Marine Products
- Holding
Risers Elbows and acces.
BAR1-312148
Plate Front End Cap Exhaust Manifold Elbow Port OMC V6 & V8 Log Style 312148
Direct replacement exhaust manifold end cap/connector (front) port side on OMC V6 - 155 HP (All Years); V8 - 283, 305, 307, and 350 cu . in. Models...
$76.95
BAR1-312149
Plate Front Exhaust Manifold Starboard for OMC V6 V8 Log 312149
Exhaust manifold Front end cap/connector starboard side Fits: OMC V6 - 155 HP (Buick Engine) V8 - 283, 305, 307, and 350 cu . in. known as Models...
$76.95
BAR1-907885
Plate Rear for Exhaust Manifold OMC 4 Cylinder 120HP 153 Cubic Inch
Direct replacement rear end cap plate for the exhaust manifold. Fits OMC 4-cylinder 153 CID 120 HP 2.5L Model 120 Engines with Log Style Exhaust...
$54.95
BAR1-908719
Plate Front End Exhaust Manifold OMC Ford for Banana Style Manifold 908719
Exhaust manifold front cap with hose bib for OMC For V8 302 and 351 CID called Models 170, 175, 190 and 235 HP Replaces OMC part # 908719 For...
$69.95
BAR1-910280
Plate Front Exhaust Manifold 2 Bib for OMC 4 Cylinder 120 2.5 910280
Front end cap for OMC 4 Cylinder 153 CID, 120 HP, 2.5L Model 120 Engine with 2 hose bibs for the Log Style Exhaust Manifold. This plate has a...
$69.95
BAR1-910384
Plate Front End Cap Exhaust for OMC 4 Cylinder 2.5 120 and 3.0L 140 910384
Front end plate with hose bib that is used on many OMC 4 cylinder GM 2.5L and 3.0L manifolds. Replaces OMC#: 910384
$69.95
BAR20-0055
Elbow Marine Exhaust 30 Degree Generic Barr 2.5 or 3 Inch 20-0055
Swivel type 30 degree exhaust elbow connector; fully jacketed. Accepts 2-1/2 Inch or 3 Inch I.D. exhaust hose. Fits the Generic Barr or Osco style...
$179.95
BAROMC-20-907765
Adaptor Exhaust Elbow to Hose OMC GM 153 2.5L Short 907765
Direct replacement exhaust elbow to hose adapter For OMC 4-cylinder 153 CID, 120 HP 2.5L Model 120 Engine with Log style Manifolds OMC # 907765 uses...
$64.95
BAROMC-20-908014
Adaptor Riser for OMC GM 153 2.5L Exhaust Manifold to Riser 908014
Exhaust manifold-to-riser adapter for use with OMC riser part # 980188 or part # 910380. For OMC 4-cylinder 153 CID, 120 HP 2.5L Model 120 Engine...
$90.95
BAROMC-20-909368
Connector Exhaust Elbow Outlet High-Rise for OMC GM 153 2.5L 909368
Direct replacement high-rise to adapter elbow for use with BAROMC20-980536 elbow Replaces OMC original equipment part # 909368. Uses GLM33930 gaskets...
$127.95
BAROMC-20-910380
Riser Elbow Exhaust for OMC GM Inline 4 and 6 Cylinder 140 165HP 910380
Exhaust Riser Elbow for OMC GM Inline 4 and 6 Cylinder applications. Fits 140 hp 3.0L 4 Cyl. OMC & Volvo and 165 hp 4.1L 6 Cyl. GM OMC. OEM:...
$222.95
BAROMC-20-980536
Riser Elbow Exhaust for OMC GM 4 Cylinder 153 2.5L 120HP 980536
Exhaust riser Elbow for OMC Stern Drive Engines. Replaces OMC riser parts # 979730 and # 980536 For OMC GM 4 cylinder, most 120 HP 2.5L, fits...
$235.95
BAROMC-20-980617
Elbow Exhaust for OMC Banana Style Manifold Ford 302 5.0L 351 5.8L V8 980617
Exhaust Elbow that was used on the OMC Ford Engine with a Bannana style manifold. Replaces OMC original equipment part # 980617 Uses SMI27935 gaskets...
$132.95
BAROMC-20-981281
Elbow Exhaust OMC Stringer 155 HP and GM V8 End Elbow 3 Bolt 981281
Exhaust elbow for OMC Stringer Outdrive Engines. Replaces OMC part # 's 907776 and # 907777 For OMC GM V6, 155 HP all years; GM V8 - 283, 305,...
$176.95
BAROMC20-913784
Riser Exhaust 4 inch Outlet for OMC and Volvo Penta V6 V8 913784 BAROMC20-913784
Exhaust Elbow Assembly Fits OMC V6 and V8 applications using the 7-3/4" inch riser height. OMC and Volvo used three riser heights which are...
$236.95
BAROMC20-982680
Riser Elbow Exhaust for OMC GM and Ford Top Rear Log Style V8 982680
Riser for OMC applications. It was used on log style manifolds for GM and Ford 1978 and newer with Rear Log Style manifolds/risers. It will fit Barr...
$200.95
BARVO-20-3862627
Riser Exhaust for Volvo Tall 11.25 Inch Replaces 3862627
Riser Volvo Exhaust 3 Inches higher than the standard riser. 11-1/4 Inches tall overall to help with water intrusion through the exhaust. Replaces...
$357.95
BPI18-1909-1
Exhaust Riser for Volvo Penta and OMC V6 V8 replaces 3863061, 3861842, 3857944
Exhaust Elbow Assembly Fits OMC V6 and V8 applications using the 7-3/4" inch riser height. OMC and Volvo used three riser heights which are...
$159.95
... more infoReplacement Available
BPI22290
Manifold Rubber Cap 1", OMC, Volvo
1.0" Rubber Cap used on OMC & Volvo Center Riser Manifolds. This cap fits Osco Manifold OSC52374, & Volvo Manifold VOL3852347-8. This item replaces...
$6.95
GLM50700
Exhaust Elbow Tube OMC Ford 5.8L Small Block V8 3853386
Exhaust Elbow Tube for Ford 5.8L 351 cid Small Block V8 Carbureted engines. Used in converting Log Style manifolds to Center Rise manifolds Cast Iron...
$129.95
GLM50780
Exhaust Pipe Tube OMC Volvo 4.3L V6, 5.7L V8 Center Rise Exhaust 0763891
Exhaust Elbow Tube Fits: OMC Model 4.3L GM 262 cid V6 1991-up OEM: 3852738 OMC Model 5.0L 305, 5.7L GM 350 cid V8 1989-up OEM: 763891 Volvo Penta...
$99.95
GLM50790
Exhaust tube for OMC Model 4.3L V6 GM 262 CID (1989 Only) Replaces:3853372
Exhaust tube for OMC Model 4.3L V6 GM 262 CID (1989 Only) Replaces:3853372
$149.95
GLM51320
Riser Exhaust for OMC GM 305 5.0L 350 5.7L Log Style V8 909863
Exhaust Elbow for OMC GM 305 and 350 CID V8 Small Block 1979-1989 and 302 351 Ford Engines with top mounted rear riser. Replaces OEM: 909863 GLM...
$156.95
... more infoReplacement Available
GLM51330
Riser Exhaust 4 Inch Outlet OMC and Volvo V6 V8 1991 and Later 3863061
Exhaust Elbow Assembly Fits OMC V6 and V8 applications using the 7-3/4" inch riser height. OMC and Volvo used three riser heights which are...
$209.95
GLM51332
Riser Elbow Exhaust Port OMC Volvo Ford EFI Center Rise 3855271
Exhaust Elbow is for the Port Side for OMC and Volvo Ford EFI engines. Has mounting provisions on the front of the risers for the EFI brackets. This...
$239.95
GLM51334
Riser Elbow Exhaust Starboad OMC Volvo Ford EFI Center Rise 3855269
Exhaust Elbow Starboard Side for OMC and Volvo Ford EFI Engines Only. Port uses a different riser! Replaces OEM: 3855269. Used only on the OMC and...
$239.95
... more info
HGE3784
Riser Exhaust 4 Inch for Volvo Penta and OMC V6 V8 7.75 High 913784
Exhaust Elbow Assembly Fits OMC V6 and V8 apllications using the 7-3/4 inch riser height. OMC and Volvo used three riser heights which are measured...
$219.95
OSC0188
Exhaust Elbow, OMC 140 HP GM 181 3.0L 4 Cylinder
Exhaust Elbow (Riser) fits 140 HP 3.0L 4 Cyl. Fits BAROMC-1-984054 Manifolds OEM: 980380 Osco Manifolds and Risers come with a 3-year limited...
$136.00
... more infoReplacement Available
SIE18-1921
Riser Exhaust for OMC GM 305 5.0L 350 5.7L Log Style V8 909863
Riser for an OMC application. It was used on log style manifolds for GM and Ford 1978 and newer with Rear Log Style manifolds/risers. It will fit...
$214.95
... more infoReplacement Available
Copyright © 2024 Basic Power Industries.
