To help you find what you are looking for we have a search / Find it Box--Read below to find out how to use the Find It Box...

The white box to the right can be typed in just like a search engine. If you are looking for a "manifold" you would type "mercruiser manifold", to find an alternator type "omc alternator" in the box, also you can type in part numbers or brief descriptions. The box is pointed out by the Red Arrow above. There is a button next to the white box that makes the site "Find It" (search). Click this button or hit the "Enter / Return" key on your keyboard....AFTER you type in the box. We also have a special section on our site for Transmissions, Type "vd" and hit "Enter/Return".

177 Fulford Dr.
Harkers Island, NC 28531
(252) 504-3355
Check Your Order Status
(Tracking Information)

Shopping Cart  [more]

Exhaust Elbows, Accessories

SIE18-4218


Drain Cock 1/4 NPT for Engine Blocks Manifolds and Heat Exchangers

Drain Cock 1/4 NPT for Engine Blocks Manifolds and Heat Exchangers

Drain Cock or Tap. Install this in any 1/4 NPT hole to allow for easy winterization. GM engine blocks and many exhaust manifolds use this size. Tech...

$9.95

BARMC-20-14478


Elbow Exhaust for Mercruiser 4.3 V6 for 4 Inch Exhaust 1987-2003 14478T01

Elbow Exhaust for Mercruiser 4.3 V6 for 4 Inch Exhaust 1987-2003 14478T01

4 Inch Exhaust Elbow Tube made of Cast Iron, Used on 1987 and Newer for exhaust systems that have a separate manifold and riser. Or needed if...

$69.95

HGE4478A


Elbow Tube Exhaust for Mercruiser V6 4 Inch Exhaust 1987-2002 14478T01

Elbow Tube Exhaust for Mercruiser V6 4 Inch Exhaust 1987-2002 14478T01

Exhaust Elbow Tube for Mercruiser V6 4.3 Liter engines. Made of Aluminum and has 4 Inch round inlet and 4 inch oval outlet. Goes between upper and...

$69.95

MER11086T


Elbow, Exhaust Port, Mercruiser

Elbow, Exhaust Port, Mercruiser

Exhaust Pipe, Port Riser to Y that will fit most Mercruiser Small block GM V8 engines from 1983 to 2001. A genuine Mercruiser Part.

$229.95

MER14478T01


Elbow, Exhaust, Mercruiser V6

Elbow, Exhaust, Mercruiser V6

Exhaust Elbow for Mercruiser GM 4.3L V6 applications

$209.95
... more info
Replacement Available

GLM51030


End Cap Assembly Manifold for Mercruiser Log Style Exhaust 73813A1

End Cap Assembly Manifold for Mercruiser Log Style Exhaust 73813A1

End Cap (Block-off Plate) Assembly For Mercruiser Log Style Manifolds Replaces: Mercruiser Part # 73813A 1; Aqua Power # 5006; Barr #s: 1-54870,...

$24.95

MER861776A2


Exhaust Block Off Plate Y Pipe Mercruiser Outdrive Thru Hull Exhaust

Exhaust Block Off Plate Y Pipe Mercruiser Outdrive Thru Hull Exhaust

Plate Exhaust Block Off Fits Alpha/Bravo V6 and V8 GM Mercruiser. Used when you remove the Y pipe to add thru hull exhaust to block off the y pipe...

$89.95

MER14343T


Exhaust Elbow 4 Inch Starboard Mercruiser V8

Exhaust Elbow 4 Inch Starboard Mercruiser V8

Starboard Exhaust Elbow for V8 with 4" Exhaust

$239.00

MER42421A5


Exhaust Elbow Assembly, Aluminum, Mercruiser 4 Cyl 83-newer

Exhaust Elbow Assembly, Aluminum, Mercruiser 4 Cyl 83-newer

Aluminum Lower Exhaust Elbow Assembly 42421A5 for Mercruiser 4 Cylinder marine engines Fits most 4 cylinder inline engines 1983 and newer 120 2.5L,...

$299.95

MER14801A1


Exhaust Elbow Mercruiser V8 Using 3 or 6 inch Riser Extension Blocks

Exhaust Elbow Mercruiser V8 Using 3 or 6 inch Riser Extension Blocks

Riser Blackext Install Kit for use in V8 with 3" or 6" Spacer Blocks - QuickSilver EOM Mercury/Mercruiser Part: 14801A 1 Sold in pairs...

$479.95

GLM50770


Exhaust Elbow Tube 4 Inch Mercruiser 80 degree Manifold Conversion

Exhaust Elbow Tube 4 Inch Mercruiser 80 degree Manifold Conversion

4 Inch Cast Iron Exhaust Elbow Tube 80 Degree Used in the conversion of Mercruiser Log Style exhaust to Center Rise Exhaust

$99.95

GLM50760


Exhaust Elbow Tube for Mercruiser 454 7.4L 1986-2000 V8 44267T

Exhaust Elbow Tube for Mercruiser 454 7.4L 1986-2000 V8 44267T

Exhaust Elbow Tube Pipe for Mercruiser 454 7.4L from 1986-1988 with Alpha Drives, and 1988-2000 with Bravo Drive. Fits between the riser and the Y...

$179.95

OSCMWS


Front End Plate for Mercruiser 2.5 120HP 1970 to 1982 47638

Front End Plate for Mercruiser 2.5 120HP 1970 to 1982 47638

Front end plate with water fitting for Mercruiser 120HP engines produced from 1970-1982. This bolts on the front of the exhaust manifold and accepts...

$31.95

OSC60252


Manifold End Plate for Mercruiser 60252

Manifold End Plate for Mercruiser 60252

End Plate for Mercruiser V8 Log Style manifolds. This plate has a Hose Bib, and uses mounting kit Osco # 60252-MK. End Plate fits Osco # 7234B, Osco...

$31.95

OSC60252-MK


Manifold End Plate Mounting Kit for Mercruiser

Manifold End Plate Mounting Kit for Mercruiser

End Plate Mounting Kit for a Mercruiser. This is for the End Plates on the Ford and GM log style Manifolds prior to 1983. The kit contains the Gasket...

$7.95

OSC54870


Manifold End Plate, Rear, for Mercruiser

Manifold End Plate, Rear, for Mercruiser

End Plate for an Exhaust Manifold on a Mercruiser. It is a Plain End Plate and does not have a Hose Bib. It is used on some GM inline 6 engines, plus...

$19.95

OSC60207


Manifold Plate, Stainless Steel, for Mercruiser

Manifold Plate, Stainless Steel, for Mercruiser

Stainless Steel Plate with a weep hole used on log style Mercruiser manifolds prior to 1983. The Plate is sandwiched between 2 Osco # 6351-G gaskets...

$10.95

MER42422A1


Pipe Exhaust Intermediate Riser to Y Pipe Mercruiser 3.0L 1983 and Newer

Pipe Exhaust Intermediate Riser to Y Pipe Mercruiser 3.0L 1983 and Newer

Lower exhaust pipe for Most Mercruiser 3.0L Engines 1983 and up. and some 5.7 Ski inboards. Fits between Riser and lower exhaust pipe on Alpha...

$139.95

MER807130A4


Y-Pipe, Mercruiser

Y-Pipe, Mercruiser

Exhaust Y-Pipe Fits most Alpha one, Gen 2 and Bravo Drives 1987 and Newer.(MER849196A 1)

$599.00
Copyright © 2020 Basic Power Industries. Powered by Zen Cart