 |  |
Y Pipes and Accessories for Mercruiser
| Code / Price | Name / Description |
| BPI89120 $22.95 Quantity in Basket: none |
Exhaust Bellow, 4" Upper, Mercruiser
Exhaust Bellow, upper 4" for Mercruiser V-6 & V-8 with Center Riser Manifolds. This item replaces Merc. # 32-44348T. |
| BPI89170 $39.95 Quantity in Basket: none |
Water Shutter, 4 inch, Mercruiser
4" Water Shutter for a Mercruiser. It goes into the "Y" Pipe on most V-6 & V-8 engines to help prevent water from backing into the manifold and engine. A swivel design and is sold in pairs. This item replaces Mercruiser OEM # 807166A3. |
| GLM89160 $17.95 This part has been superseded by MAL9-42801. Quantity in Basket: none |
Water Shutter 3", Mercruiser
3" Water Shutter for Mercruiser, with Swivel design. Sold Each OEM: 99370A2 |
| GLM89260 $35.95 Quantity in Basket: none |
Flapper Valve, Mercruiser 5-6"
Exhaust Flapper Valves with Clamps Fits Mercruiser with 5" and 6" Flapper valves |
| IDE6752-5 $1.25 Quantity in Basket: none |
Hose Clamp, Stainless Steel, 1.875" - 3.75"
Stainless Steel Hose Clamp 1-7/8" - 3-3/4" |
| IDE6772-5 $1.95 Quantity in Basket: none |
Hose Clamp, Stainless Steel, 3.125" - 5"
Stainless Steel Hose Clamp 3-1/8" - 5" |
| MAL9-42801 $14.95 Quantity in Basket: none |
Water Shutter, Exhaust, Mercruiser
Water Shutter used in the Y-Pipe on a Mercruiser Sterndrive. It will fit V-6 & V-8 Engines from 1982-87 with a 3 inch Exhaust Y-Pipe. This item replaces: Mercruiser # 99370A2. |
| MAL9-42802 $21.95 Quantity in Basket: none |
Water Shutter, Exhaust, Mercruiser
Exhaust Water Shutter for a Mercruiser Sterndrive. It is used in the 4.0" Exhaust Y-Pipe 1987 & Up. These Water Shutters are sold as Each. This item replaces Mercruiser 807166A3 & 14348T. |
| MAL9-72805 $22.95 Quantity in Basket: none |
Tube, Exhaust, Mercruiser
This is the upper bellows that is on the riser on V6-V8 Engines with the 4 inch exhaust riser. This also fits the late model 4 cylinder 3.0L & 3.0LX engines with the two bolt riser. |
| MAL9-72807 $28.95 Quantity in Basket: none |
Exhaust Elbow Bellow, Mercruiser 140, 165 GM
This Exhaust Tube fits the inline GM 4-6 cylinder engines. All 165 inline 6 GM models, all 140 i/l 4 gm models 120/140 hp |
| MAL9-72808 $22.95 Quantity in Basket: none |
Tube, Exhaust, 3" to 4", Mercruiser
Tube, Exhaust 3" to 4" Replaces: Mercruiser 70981A3 For 3" center mounted riser to 4" elbow, Rear mounted riser to 4" Y-Pipe, V8 1971-1982, V6 & V8 Fits: MCM 470/485, 898, 228, 250, 260, 280, 330, & Ford 233 |
| MAL9-72809 $22.95 Quantity in Basket: none |
Exhaust Bellow 3", Mercruiser
This Bellows fits many applications where the bellows is 3 inches on both sides and has an overall length of 4 inches. Fits MCM 470/485, 185, 205, 2228, 260 I.D. 3" (76mm) X 4" (102mm) Long OEM: 32-90949T |
| MAL9-72811 $28.95 Quantity in Basket: none |
Exhaust Bellow 4" Lower, Mercruiser
This is the oval shaped Lower Exhaust Bellow that fits from the exhaust elbow to the Y pipe on Mercruiser applications. Generally this fits all V8 Mercruiser engines from 1987 and up. OEM: 32-14358T |
| MER11086T $159.95 Quantity in Basket: none |
Elbow, Exhaust Port, Mercruiser
Exhaust Pipe, Port Riser to Y that will fit most Mercruiser Small block GM V8 engines from 1983 to 2001. A genuine Mercruiser Part. |
| MER14343T $169.95 Quantity in Basket: none |
Exhaust Elbow Extension, 4"-Starboard, Mercruiser V6, V8
Starboard Exhaust Elbow for V6 and V8 with 4" Exhaust |
| MER14478T01 $189.95 Quantity in Basket: none |
Elbow, Exhaust, Mercruiser V6
Exhaust Elbow for Mercruiser GM 4.3L V6 applications |
| MER14801A1 $329.00 Quantity in Basket: none |
Riser Blackext Install Kit, Mercruiser V8 with riser spacer
Riser Blackext Install Kit for use in V8 with 3" or 6" Spacer Blocks - QuickSilver EOM Mercury/Mercruiser Part: 14801A 1 Sold in pairs only. Replaces: 14801A 1 |
| MER14865A1 $249.00 Quantity in Basket: none |
Riser Blackext Install Kit, Mercruiser V6 with riser spacer
Riser Blackext Install Kit for use in V6 with 3" or 6" Spacer Blocks - QuickSilver EOM Mercury/Mercruiser Part: 14865A 1 Sold in pairs only. Replaces: 710-14865A 1 |
| MER25-43809 $0.95 Quantity in Basket: none |
Grommet-Exhaust Flapper Pin, Mercruiser
Grommet for Water Shutter (Flapper Valve) on Mercruiser Note: 2 Required Per Side |
| MER41802 $6.95 Quantity in Basket: none |
O-Ring Exhaust Seal, Mercruiser Transom
an O-Ring Exhaust Seal used on Mercruiser Sterndrives. It goes from the exhaust Y pipe to the Exhaust outlet at the transom. A Genuine Mercruiser part. |
| MER42422A1 $139.95 Quantity in Basket: none |
Exhaust Pipe, Lower , Mercruiser 3.0L 88-Up
Lower exhaust pipe for Mercruiser 3.0L Engines, (1988 -up) Fits between Riser and lower exhaust pipe on Drive 4" diameter X 3" diameter |
| MER45586 $29.95 Quantity in Basket: none |
Exhaust Shutters, Mercruiser Inline 4, 6 and 3.7L
Water Shutter for Exhaust on Mercruiser Inline Engines |
| MER60930 $21.95 Quantity in Basket: none |
Water Shutter, 3" Butterfly Design, Mercruiser 73-up
3" Flapper (Water Shutter), Butterfly Design for various Mercruiser 1973 and newer |
| MER60931 $10.95 Quantity in Basket: none |
Retainer, Water Shutter, Mercruiser
Retainer for MER60930 Water Shutter |
| MER807130A4 $459.00 Quantity in Basket: none |
Y-Pipe, Mercruiser
Exhaust Bullhorn Kit Required kit for the MHP 500 Carburetor and 500 Bulldog engines. Used in conjunction with Exhaust Elbow Kit (MER849196A 1) |
| MER807153T $169.95 Quantity in Basket: none |
Intermediate Exhaust Pipe, Mercruiser 5.7L, 6.2L
Elbow 4" to 3" Exhaust Pipe Fits Mercruiser 5.7L, 6.2L engines |
| MER807166A1 $59.95 Quantity in Basket: none |
Shutter, Water, Mercruiser GM V6, V8
Water Sutter that fits many Mercruiser applications. It is 2-1/2" wide and 6-1/8" long This valve has a butterfly action and comes with 2 grommets. Sold as Each. 
|
| MER807166A3 $74.95 Quantity in Basket: none |
Water Shutter, Mercruiser Y-Pipe
4" Water Shutter (pair) for Mercruiser Y Pipe |
| MER99370A2 $19.95 Quantity in Basket: none |
Flapper, Mercruiser
3" Water Shutter that was used on V-6 & V-8 Mercruiser applications with center riser manifolds from 1982 thru 1987. It's purpose is to keep water from backing into the Riser & Manifold. |
