177 Fulford Dr.
Harkers Island, NC 28531
(252) 504-3355
Categories
- Mercruiser Sterndrives
- Mercruiser Inboards
- OMC Sterndrives
- OMC Inboards
- Detroit Diesel
- Volvo Penta Sterndrives
- Volvo Penta Inboards
- Crusader Inboards
- Pleasurecraft (PCM) Inboards
- Chris Craft Inboards
- Chrysler Inboards
- Marine Power Inboards
- Engines (New & Remanufactured)
- Indmar Inboards
- Detroit Diesel Parts
- Volvo Penta Diesel Inboards
- Yanmar Diesel Inboards
- Caterpillar Diesel Inboards
- Cummins Diesel Inboards
- Outboard Parts
- |_ Chrysler
- |_ Engine Covers
- |_ Honda
- |_ Jack Plates
- |_ Johnson Evinrude
- |_ Mercury Mariner
- |_ Controls Steering
- |_ Cooling System
- |_ Drive System (Lower Unit)
- |_ Electrical System
- |_ Engine System
- |_ Fuel System
- |_ Propellers
- |_ Service Manuals
- |_ Test Equipment Tools
- |_ Trim System
- |_ Zincs Anodes
- |_ Nissan Tohatsu
- |_ Suzuki
- |_ Tools Testing Equipment
- |_ Yamaha
- Personal Water Craft
- All Applications
- Propellers
- Diesel Engines
- Used Engines
- Used Items
- Marine Transmissions and Parts - Borg Warner Velvet Drive - ZF Hurth - Paragon
- Fishing Tackle
- Decals and Stickers
- T & H Marine Products
- Holding
Test Equipment Tools
BPI18-9896
Lifting Eye Tool Replaces Mercury 91-904551
LIFTING EYE TOOL Replaces: 91-904551, Sierra 18-9896
$30.95
MAL9-79816
Tester Ethanol Fuel Mercury 91-879172T28
Tester for Ethanol percentage. Replaces: Mercury 91-879172T28 Instructions: Fill with water to the line, fill with gas to the neck, put lid on and...
$6.95
CDI551-33M
Gearcase Filler Metric Adapter
Metric Adapter for all motors except Suzuki for use with CDI551-33GF E-Z Fill.
$8.95
... more infoReplacement Available
CDI551-34M
Gearcase Filler Metric Adapter CDI551-34M
Metric Adapter for all motors except Suzuki for use with CDI551-33GF E-Z Fill.
$8.95
... more infoReplacement Available
CDI551-334M
Adapter, Metric, Grease Filler
Metric Adapter for Grease Filler Replaces 519-34M, 551-33M, 551-34M For all motors except Suzuki. Additional Info: Adapter for 551-33-1 Gearcase...
$13.95
CDI511-9800
Multimeter Resistor Test Card
Resistor Test Card for Multimeters Additional Info: Perfect for calibrating the multimeter before troubleshooting begins, Basic resistance values...
$12.95
CDI551-34TN
Threaded Nozzle, Pressure-Vacuum Tester
Threaded Nozzle Fits and is included in CDI551-34PV Pressure/Vacuum Tester. Additional Info: Threaded Nozzle for 551-34PV Pressure & Vacuum Tester
$13.95
CDI911-9783
Bullet Connector Kit
Bullet Connector Kit Contains: 10 each Male Bullet with Boots, and 10 Female Bullets with Sleeves. Contains 10 pieces each of the male, female...
$14.95
GLM90063
Propeller Wrench Floating Mercury Mariner 13/16 Inch 91-859046M2
13/16 Inch Floating Propeller Wrench (yellow) for Mercury Mariner 20, 25 HP OEM: 91-859046M2
$12.95
GLM90062
Propeller Wrench Floating Mercury Mariner 15/16 Inch 91-859046M3
15/16 Inch Propeller Wrench (red Color) for Mercury Mariner 30, 40, 50, 60 HP OEM: 91-859046M3
$12.95
GLM90061
Wrench Propeller Floating for Mercury Mariner 1-1/16 Inch 91-859046M4
1-1/16 Inch Floating Propeller Wrench (blue) for Mercury/Mariner 75, 90, 100, 115, 125, 135, 150, 175, 200, 225, 250 HP OEM: 91-859046M4
$20.95
GLM90064
Wrench Propeller floating for Mercury Mariner 9/16 Inch 91-859046M1
9/16" Propeller Wrench (purple) for Mercury/Mariner 6, 8, 9. 9, 15 HP OEM: 91-859046M1
$12.95
CDI511-9763
Spark Gap Tester, Adjustable, Outboard Engines
Enclosed 1 Cyl. Adjustable In-Line Spark Gap Tester Enclosed design helps reduce the possibility of igniting gas fumes. Detachable grounding clamp.
$14.95
... more infoReplacement Available
SMI01112
Propeller Nut Wrench (Metal) Mercury, Mariner, and Mercruiser
Includes nut and 2 tab washers, Removes and Installs all Mercury Outboards (65 HP and up); Mercruisers (110 - 260 HP) Standard Units Wrench replaces...
$15.95
SIE18-9781
Pump Oil for Lower Unit Fits Quart Bottles
Oil Pump for Quart bottle, 4 cc pump and 3/8" - 16 swivel metal marine filler fitting. Ideal for adding Gear Lube and other fluids to small engines...
$15.95
CDI511-9775
Load Resistor
Load Resistor To load the output of ignition modules when testing ignition coils. Used for testing DVA outputs from power packs and switch boxes....
$25.95
THQF-2K-DP
Quick Flush Outboard Engine Flush Kit Complete Kit Mercury Yamaha
Quick Flush™ Outboard Flush Fitting Complete Kit for Mercury, Yamaha and other outboards T-H Marine introduces a quick and easy way to flush...
$29.95
... more infoGLM90066
Propeller Wrench Floating for Mercury Mariner Force 15/16 91-856639A1
15/16 Inch Propeller Wrench Kit (red color) for Mercury, Mariner and Force Outboard. Great to keep on the boat because it floats and wont rust. Fits:...
$19.95
CDI551-33CV
Filler Vent Check Valve
Filler Vent Check Valve Calibrated check valve creates airlock to keep lube from running out while you install drain plug. Includes 4" Hose. A must...
$25.95
GLM90065
Wrench Propeller Floating for Mercruiser Mercury Mariner Force Honda 1 1/16
1-1/16" Propeller Wrench Kit (blue) for Mercury/Mariner/Force V4 & V6, 75, 90, 100, 115, 125, 135, 150, 175, 200, 225, 250 HP; all Mercruiser; Honda...
$18.95
CDI511-9764
Spark Gap Tester, Neon Indicator
511-9764 Neon Spark Tester 1 Cyl Sealed spark tester can be used inline to the spark plug while the engine is running or it can be connected to...
$36.95
CDI511-9902
Spark Tester Wire
7" Extension Wire for use with the CDI511-9766 Spark Gap Tester (Set of 4) Additional Info: 9.5" Spark plug wire extension. For use w/...
$27.95
SMI01117
Oil - Fuel Filter Wrench
This handy wrench removes screw on type marine water separator fuel filters and most oil filters Tough, forged stainless steel
$22.95
CDI519-T163
Thermomelt Temp Stiks, 163 degree F
Stevens Thermomelt Temp Stiks, 163°F Long lasting Temp Stiks provide a quick and reliable means to check cooling systems. With engine warmed up,...
$22.95
CDI511-9903
Spark Plug Tester Wire Leads
24" Extension Wire for use with the CDI511-9766 Spark Gap Tester (Set of 4) Additional Info: 24" Spark plug wire extensions, For use w/ 511-9766...
$34.95
CDI519-T125
Thermomelt Temp Stiks, 125 degree F
Stevens Thermomelt Temp Stiks, 125°F Long lasting Temp Stiks provide a quick and reliable means to check cooling systems. With engine warmed up,...
$25.95
SIE18-9896
Tool Lifting Eye for Mercury and Mariner Outboards 91-90455
Lifting Eye Tool. Used to thread into top of flywheel to remove and install Mercury and Mariner outobard engines on the boat. A Must for all Marine...
$32.95
MER91-90455-1
Lifting Eye, Mercury, Mariner
Outboard Engine Lifting Eye Threads into flywheel Fits most 2 cycle Mercury/Mariner Outboards from the 30/40 (2 cyl.) on up.
$45.95
... more infoReplacement Available
SIE18-79833
Tool Flywheel Puller for Mercury Mariner Outboards 18-79833
Flywheel Puller Tool for Mercury and Mariner Outboards. Screws into the top of the flywheel until tight, then screw center bolt down to remove...
$63.95
CDI511-9772
Adapter DC Ampmeter Tool Outboard Motor DVA Testing CDI511-9772
511-9772 Ampmeter Adapter Replaces: PL88 Use to replace ignition coil for testing DVA output from ignition pack if a bad coil is suspected. ...
$79.95
Copyright © 2024 Basic Power Industries.