 Nobody Beats Our Deal
|
177 Fulford Dr.
Harkers Island, NC 28531
(252) 504-3355
Categories
- |_ Views
- |_ New Marine Transmissions
- |_ Rebuilt Transmissions
- |_ Transmission Parts
- |_ Allison Parts
- |_ Borg Warner Velvet Drive Parts
- |_ Capitol Transmission Parts
- |_ Coolers
- |_ Drive Dampers
- |_ Hurth Transmission Parts
- |_ Adapter Ring
- |_ Baffle
- |_ Bearings
- |_ Clutch Plate Kit
- |_ Clutch Plates
- |_ Coupling Shaft
- |_ Drive Damper
- |_ Filters
- |_ Gasket Kit
- |_ Hydraulic Pump
- |_ Mounts
- |_ Oil Pump
- |_ Overhaul Kit
- |_ Planetary Shaft
- |_ Seals
- |_ V Drive Internal Parts
- |_ Washers
- |_ Paragon Transmission Parts
- |_ Service Manuals
- |_ Transmission Mounts
- Mercruiser Sterndrives
- Mercruiser Inboards
- OMC Sterndrives
- OMC Inboards
- Detroit Diesel
- Volvo Penta Sterndrives
- Volvo Penta Inboards
- Crusader Inboards
- Pleasurecraft (PCM) Inboards
- Chris Craft Inboards
- Chrysler Inboards
- Marine Power Inboards
- Engines (New & Remanufactured)
- Indmar Inboards
- Detroit Diesel Parts
- Volvo Penta Diesel Inboards
- Yanmar Diesel Inboards
- Caterpillar Diesel Inboards
- Cummins Diesel Inboards
- Outboard Parts
- Personal Water Craft
- All Applications
- Propellers
- Diesel Engines
- Used Engines
- Used Items
- Marine Transmissions and Parts - Borg Warner Velvet Drive - ZF Hurth - Paragon
- Fishing Tackle
- Decals and Stickers
- T & H Marine Products
- Holding
Drive Damper
ALTDA-204
Damper Drive Flex Plate for Volvo Penta Marine ZF Hurth 841892-3
Drive Damper for Volvo Penta using a ZF or Hurth Tranmission. Fits Transmissions with a 10 spline input shaft. HAS THREE DIFFERENT SIZE SPRINGS....
$329.95
ALTDA-301
Drive Damper 10 Spline for Hurth ZF Marine Transmission 254750
Drive Damper Assembly for Hurth Marine 122 mm Outside Diameter X 111 mm bolt circle center. 10 Spline 10/23/29 Teeth DIN 5464; 45° X 8 Replaces...
$109.95
... more info
ALTDA-302
Drive Damper Flex Plate for Volvo MS Series Transmission 10 spline 2301-650-001
Drive Damper Flex Plate Assembly for Hurth Marine 10 Spline Transmissions. 152 mm (Outside Diameter 5.98 Inches) X 123 mm (Bolt Circle Diameter 4.84...
$129.95
ALTDA-303
Drive Damper Flex Plate 6.18 Diameter 10 Spline for Hurth Velvet Drive
Drive Damper Flex Plate Assembly for Hurth and Borg Warner Velvet Drive Marine Transmissions. Fits many Hurth small Transmissions. Fits Perkins 4-108...
$129.95
... more info
ALTDA-304
Drive Damper Assembly 26 Teeth for Velvet Drive Marine Transmission 3307316002
Hurth Drive Damper Assembly 6-3/16" X 1-11/32" Diameter, 5 Bolt Holes, 6 Springs, 26 Teeth, 157mm OD Replaces: Hurth original equipment part #...
$399.00
... more info
ALTDA-305
Drive Damper Flex Plate for Hurth ZF Marine Transmission 1866-052-002
Drive Damper Flex Plate. Fits ZF and Hurth 26 Spline Marine Transmissions. 5.962" / 151.44 mm Outside Diameter 1-1/4" Diameter (spline) 8 bolt holes...
$533.95
ALTDA-511
Drive Damper for Hurth ZF or Velvet Drive 5000 Marine Transmissions
Drive Damper fits all GM engines with a 14 inch flywheel utilizing a ZF Hurth or Borg Warner 5000 series Transmission. Fits Velvet Drive that...
$399.00
CRU98511
Drive Damper Marine Velvet Drive 5000 Series and Hurth ZF Transmissions
Drive Damper used on a Hurth and Borg Warner 5000 Transmissions with a 454 C.I.D. Crusader engine. This damper reduces the inherent gear chatter...
$386.95
... more infoReplacement Available
MER860125T
Drive Damper for Hurth ZF or Velvet Drive 5000 Marine Transmissions
Drive Damper fits all engines utilizing a Hurth or Borg Warner 5000 series. This damper dramatically reduces the gear chatter noise found at idle...
$399.00
... more infoReplacement Available
Copyright © 2024 Basic Power Industries.
