To help you find what you are looking for we have a search / Find it Box--Read below to find out how to use the Find It Box...

The white box to the right can be typed in just like a search engine. If you are looking for a "manifold" you would type "mercruiser manifold", to find an alternator type "omc alternator" in the box, also you can type in part numbers or brief descriptions. The box is pointed out by the Red Arrow above. There is a button next to the white box that makes the site "Find It" (search). Click this button or hit the "Enter / Return" key on your keyboard....AFTER you type in the box. We also have a special section on our site for Transmissions, Type "vd" and hit "Enter/Return".

177 Fulford Dr.
Harkers Island, NC 28531
(252) 504-3355
Check Your Order Status
(Tracking Information)

Shopping Cart  [more]




Timing Jumper Tool Cable Delco EST

$10.95

  • Part #: MP009159


Add to Cart:

Timing Tool for Delco EST timing systems.

Locks out module timing. Needed to time Delco EST ignition Systems.

Directions:
1. Plug directly into distributor
2. Hook battery voltage to the black wire.
3. Start engine.
4. Set initial timing to manufacturers Specs
5. Unplug and the module does the rest!

Why do I need the timing tool??

The timing tool cancels out the timing built into the module in the distributor. Take a look at the chart below. Notice the 10 Degrees of Initial timing with the shunt activated.

Then with the shunt unplugged the engine has 19 degrees of advance at idle.

So if you set the timing the old fashioned way, you are losing the 9 degrees of advance that is controlled by the module.

I get calls almost every day with people stating their Delco EST ignition only has 10 degrees of advance. This is because they don't understand the proper timing method for this ignition system.

I hope this helps.... Jim.





Copyright © 2020 Basic Power Industries. Powered by Zen Cart