Home > Outboard Parts > Mercury Mariner Outboards > Drive System (Lower Unit) for Mercury Mariner > Gearcase Components for Mercury Mariner Outboards

Select Parts from an Illustration of Your Engine

3.9, 4, 4.5, 6, 7.5, 9.8 HP
6, 8, 9.9, 10, 15 HP
18XD, 20, 25 HP
25 HP (4S), 30 HP (2-CYL.), 40 HP, 50 HP (2 & 3-CYL.)
35-70 HP (2, 3 & 4-CYL.)
50, 55, 60 HP (3-CYL.) (2-STROKE), 40, 50, 60 HP EFI (4-CYL.) (4-STROKE)
30-125 HP (3 & 4-CYL.)
L4, L6 & V6 (65-225 HP)
3.0L (200 DFI, 225 CARB, 225 & 250 EFI)
4-STROKE VERADO INLINE 6

Gearcase Components for Mercury Mariner Outboards
Code / Price Name / Description
BPI21120   

$16.95 

Sorry, BPI21120 is temporarily backordered. Please check back later.


Quantity in Basket: none
Nut Cover for Mercruiser Mercury Mariner Large Gearcase 79448


Cover Nut for Mercruiser R, MR, Alpha One, Gen. II, Bravo 1 ; Mercury/Mariner Inline/V6.
Holds bearing carrier in the lower unit.
Many times its better to drill the old nut on two sides and break it to get it out. That will give you a chance to clean the threads before installing a new nut. Many times trying to get the old nut out in one piece cracks the lower unit housing which is very expensive.
OEM: 79448
Note: Does Not Fit Bravo 2 Or Bravo 3
 
BPI22420   

$3.95 
This part has been superseded by GLM22420
Quantity in Basket: none
Plug Drain Fill or Vent Mercruiser Mercury Mariner Johnson Evinrude OMC


Screw Set for Johnson/Evinrude # 318544; OMC # 307551; Mercruiser, Mercury/Mariner Quicksilver #s: 10-79953Q2, 10-79953Q04, 10-79953K04, 878811;
Mallory #s: 9-72650, 9-72655; Sierra # 18-2244; Aqua Power # 2686
 
GLM11030   

$50.95 
   
Quantity in Basket: none
Shift Spool Mercruiser Mercury Mariner Lower Unit 818349T1


This Shift Spool Assembly Fits Mercruiser Alpha One, And Alpha One Gen II. It Also Fits Mercury And Mariner Outboard Models 200(DFI), 225 (3.0 Carb), 225 Seapro/Marathon(3.0 Carb), 225/250 (3.0l EFI).
Replaces OEM: 818349T1
 
GLM11050   

$1.99 
   
Quantity in Basket: none
Spring Clutch Dog Pin Retainer got Mercruiser Mercury Mariner 24-30893


Clutch Dog Spring for Mercruiser And for Mercury Mariner Applications. Goes Around the Clutch Dog and Holds The Pin From the Shift Spool In Place.
OEM: 24-30893
 
GLM11071   

$2.39 
   
Quantity in Basket: none
Key Impeller for Mercruiser Mercury Mariner Lower Unit 28-43037


Key for Water Pump on Mercruiser Alpha One Gen. II and Mercury/Mariner Gearcases
OEM: 28-43037
 
GLM11380   

$5.79 
   
Quantity in Basket: none
Washer Bearing Carrier for Mercury Mariner Mercruiser 14-79447


Lower Unit Tab Washer, Larger, For Mercruiser, and Mercury
OEM: 14-79447
 
GLM11381   

$10.99 
   
Quantity in Basket: none
Washer Bearing Carrier Mercury Mariner Mercruiser External Tab 14-18323


Tab Washer for Mercruiser Alpha One Gen. II and Mercury/Mariner Outboards
OEM: 14-18323
 
GLM12341   

$20.99 
   
Quantity in Basket: none
Carrier Assembly, Mercruiser, Oil Seal


Oil Seal Carrier Assembly for Mercruiser Alpha One Gen. II
OEM: 807929A1
 
GLM12824   

$11.95 
   
Quantity in Basket: none
Coupling Assembly, Mercury, Mariner


Coupling Assembly for Mercury/Mariner Gearcase
OEM: 816597A1
 
GLM21018   

$11.39 
   
Quantity in Basket: none
Bushing Shift Shaft Mercury Mariner V6 3.0L 23-815921A4


Shift Bushing for Mercury/Mariner V6 3.0L 200 225 225 250
OEM: 23-815921A4
 
GLM21020   

$13.95 
   
Quantity in Basket: none
Bushing Shift Shaft for Mercury Mariner 23-77631A2


Shift Shaft Bushing for Mercury/Mariner 30 HP 2 Cyl., 40 HP 2/3 Cyl., Inline 6, and V6
OEM: 23-77631A2
 
GLM21060   

$26.95 
   
Quantity in Basket: none
Cam Control Box for Mercruiser Mercury Mariner 34682


Control Box cam for Mercruiser, Mercury Mariner Controls.
OEM: 34682
 
GLM21070   

$33.09 
   
Quantity in Basket: none
Cam Control Box Face for Mercruiser Mercury Mariner Side Mount 59369


Face Cam for Mercruiser Mercury Mariner Remote Control.
OEM: 59369
 
GLM21110   

$14.79 
   
Quantity in Basket: none
Nut Cover for Mercury Mariner Lower Unit 52699


Cover Nut fits Mercury, Mariner Lower Units and 80 series Mercruiser outdrivs. Holds the bearing carrier in lower unit.
OEM: 52699
 
GLM21120   

$16.95 

Sorry, GLM21120 is temporarily backordered. Please check back later.


Quantity in Basket: none
Nut Cover for Mercruiser Mercury Mariner Large Gearcase 79448


Cover Nut for Mercruiser R, MR, Alpha One, Gen. II, Bravo 1 ; Mercury/Mariner Inline/V6.
Holds bearing carrier in the lower unit.
Many times its better to drill the old nut on two sides and break it to get it out. That will give you a chance to clean the threads before installing a new nut. Many times trying to get the old nut out in one piece cracks the lower unit housing which is very expensive.
OEM: 79448
Note: Does Not Fit Bravo 2 Or Bravo 3
 
GLM21131   

$2.19 
   
Quantity in Basket: none
Cross Pin, Mercruiser, Mercury, Mariner Lower Unit


Cross Pin for Mercruiser R, MR, Alpha One and Gen. II; Mercury/Mariner 60-125 HP, Inline/V6,
OEM: 17-30632
 
GLM21134   

$1.69 
   
Quantity in Basket: none
Pin Lower Shift Crank for Mercruiser Lower Unit 17-37972-1


Pin for Mercury, Mariner Force Gearcase. Holds the lower shift crank in place in the housing.
OEM: 17-37972-1
 
GLM21136   

$1.69 
   
Quantity in Basket: none
Retainer E-Ring for Mercury Mariner Mercruiser Alpha Gen 2 53-29641


E-Ring for Mercruiser Alpha One Gen. II Lower Unit for the shift shaft. Mercury/Mariner 40-70 HP, 3 Cylinder, 60-125 HP
OEM: 53-29641
 
GLM21150   

$38.95 
   
Quantity in Basket: none
Shaft Shift Lower Unit for Mercury Mariner Inline Engines 76062A1


Shift Shaft for a Mercury/Mariner/Force Outboards. This shaft fits L4, L6, and V6. This item replaces Merc. # 76062A1.  
GLM21161   

$1.79 
   
Quantity in Basket: none
Nut Lock Stainless 10-32 for Mercruiser Mercury Mariner 11-859124


Stainless Steel Lock Nut
Fits Mercruiser R, MR, Alpha One and Mercury/Mariner 40-70 HP Lower Unit for water intake screen.
OEM: 11-45812, 11-859124
 
GLM21490   

$1.49 
   
Quantity in Basket: none
Water Pump Housing Washer for Mercruiser R Mercury Mariner 12-29245


Washer for Water Pump Housing on Mercruiser Rand Mercury/Mariner/Force Gear Housing
Replaces Mercury Marine Quicksilver original equipment part # 12-29245
 
GLM21731   

$8.95 
   
Quantity in Basket: none
Drain Screw Set, Magnetic


Magnetic Draining Screw Set for all Mercruiser/Mercury/Mariner drives for OMC/Volvo SX drives
Mercury # 22-67892A1
OMC # 3854539
Volvo # 3854539-8
 
GLM21740   

$3.29 
   
Quantity in Basket: none
Screw, Zinc, Trim Tab, Mercury, Mariner, Mercruiser


Trim Tab Zinc-Screw, For Mercruiser, Mercury/Mariner
OEM: 10-32470
 
GLM21741   

$3.59 
   
Quantity in Basket: none
Screw, Gear Housing, Mercury, Mariner, Mercruiser


Screw, Gear Housing for Mercury/Mariner and Mercruiser
OEM: 10-806327
 
GLM22420   

$3.95 

   
Quantity in Basket: none
Plug Drain Fill or Vent Mercruiser Mercury Mariner Johnson Evinrude OMC


Screw Set for Johnson/Evinrude # 318544; OMC # 307551; Mercruiser, Mercury/Mariner Quicksilver #s: 10-79953Q2, 10-79953Q04, 10-79953K04, 878811;
Mallory #s: 9-72650, 9-72655; Sierra # 18-2244; Aqua Power # 2686
 
GLM23210   

$6.09 
   
Quantity in Basket: none
Shim, Mercruiser, Mercury, Mariner Lower Drive Shaft Bearing


Lower Drive Shaft Bearing Shim Set for Mercruiser, Mercury/Mariner
OEM: 15-42637A1
Contains 1 each: .002, .003, .005, .010, .020 Shims
 
GLM23220   

$7.09 
   
Quantity in Basket: none
Shim, Mercruiser, Mercury, Mariner Lower Unit Drive Shaft Bearing


Shim (1991-95) Mercruiser, Mercury/Mariner, 3.500 OD
OEM: 15-47397A1
Contains 1 each: .002, .003, .005, .010, .020
 
GLM23223   

$12.95 
   
Quantity in Basket: none
Shim Set, Mercury, Mariner, Force 3 Cyl 50-60 HP Outboard 15-812769A1


Shim Set for Lower Unit Gears on Mercury/Mariner/Force
Fits:
3-Cylinder 50 HP Serial No. OD000750-OG589999 (1991-95)
3-Cylinder 55 HP Serial No. OD000750 & Up (1996)
3-Cylinder 60 HP Serial No. OD000750 & Up (1991-95)
1.64:1 Ratio (14:23 Teeth)
This Shim Set is also included in GLM11552 Complete Gear Set and GLM11562 Forward & Pinion Gear Set
Replaces OEM: 15-812769A1
 
GLM23224   

$16.95 
   
Quantity in Basket: none
Shim Set, Mercury, Mariner, Force 3 Cyl 50-60 HP Outboard 15-812770A1


Shim Set for Lower Unit Gears on Mercury/Mariner/Force
Fits:
3-Cylinder 50 HP Serial No. OD000750-OG589999 (1991-95)
3-Cylinder 55 HP Serial No. OD000750 & Up (1996)
3-Cylinder 60 HP Serial No. OD000750 & Up (1991-95)
1.64:1 Ratio (14:23 Teeth)
This Shim Set is also included in GLM11442 Complete Gear Set and GLM11452 Forward & Pinion Gear Set
Replaces OEM: 15-92881A1
 
GLM23225   

$3.45 
   
Quantity in Basket: none
Shim Set, Mercury, Mariner, Force Inline 4 40-50 HP Outboard 15-92881A1


Shim Set for Lower Unit Gears on Mercury/Mariner/Force
Fits:
L4 40 HP Serial No. OC159200 & Up (1989-Up)
L4 45 HP Serial No. 5531630 & Up (1986)
L4 50 HP Serial No. 5531630 & Up (1980-86)
2.0:1 Ratio (13:26 Teeth)
This Shim Set is also included in GLM11442 Complete Gear Set and GLM11452 Forward & Pinion Gear Set
Replaces OEM: 15-812770A1
 
GLM23226   

$4.45 
   
Quantity in Basket: none
Shim Set, Mercury, Mariner, Force Inline 4 40-50 HP Outboard 15-38374A1


Shim Set for Lower Unit Gears on Mercury/Mariner/Force
Fits:
L4 40 HP Serial No. OC159200 & Up (1989-Up)
L4 45 HP Serial No. 5531630 & Up (1986)
L4 50 HP Serial No. 5531630 & Up (1980-86)
2.0:1 Ratio (13:26 Teeth)
This Shim Set is also included in GLM11442 Complete Gear Set and GLM11452 Forward & Pinion Gear Set
Replaces OEM: 15-38374A1
 
GLM23300   

$4.29 
   
Quantity in Basket: none
Shim Set, Mercury, Mariner, Force V6 150-200 HP Outboard 15-57007A1


Shim Set for Lower Unit Gears on Mercury/Mariner/Force
Fits:
V6 150 HP Standard Rotation Serial No. 6616991-OA904645 (1985)
V6 175 HP Standard Rotation Serial No. 5393737-668750 (1980-81)
V6 200 HP Standard Rotation Serial No. 5393737-6073191 (1980-81)
All Models with Pre-load Pin in Drive Shaft
This Shim Set is also included in GLM11770 Complete Gear Set and GLM11780 Forward & Pinion Gear Set
Replaces OEM: 15-57007A1
 
GLM26130   

$62.39 
   
Quantity in Basket: none
Power Trim Hose, Mercury, Mariner


Trim Hose for Mercury/Mariner
OEM: 32-88005
 
GLM26140   

$61.39 
   
Quantity in Basket: none
Power Trim Hose, Mercury, Mariner


Trim Hose for Mercury/Mariner
OEM: 32-88006
 
GLM31170   

$2.95 
   
Quantity in Basket: none
Gasket, Drain Plug, Mercruiser, Mercury, Mariner, OMC, Volvo SX


Gasket, Drain Plug
Replaces: Mercury 12-19183-2; OMC 307552; Mallory 9-60408, 9-60101
For: Most Models (2 per pack)
 
GLM32800   

$2.95 
   
Quantity in Basket: none
Washer, Lower Unit, Mercruiser, Mercury, Mariner


Washer for Lower Unit on Mercruiser, Mercury/Mariner
OEM:12-92721
 
GLM85590   

$6.95 
   
Quantity in Basket: none
Face Seal, Mercury, Mariner


Face Seal for Mercury/Mariner
OEM: 26-816575A2
 
MAL9-71000   

$24.95 
   
Quantity in Basket: none
Cam Control Box for Mercruiser Mercury Mariner 34682


Control Box cam for Mercruiser, Mercury Mariner Controls.
OEM: 34682
 
MAL9-72004   

$3.95 
   
Quantity in Basket: none
Nut Lock 7/16 Fine Thread Stainless Steel for Mercruiser 11-13439-1


Lock Nut, 7/16" fine
For Mercruiser R, MR, Alpha One Upper Unit and Trim Assembly; Bravo Trim Assembly; R Lower Unit;
OEM: 11-13439-1
 
MAL9-72155   

$19.95 
   
Quantity in Basket: none
Nut Cover for Mercruiser Mercury Mariner Lower Unit Large Gearcase 79448


Cover Nut Bearing Carrier Nut for Mercruiser R, MR, Alpha One, Gen. II, Bravo 1 ; Mercury/Mariner Inline/V6.
Holds bearing carrier in the lower unit.
Many times its better to drill the old nut on two sides and break it to get it out. That will give you a chance to clean the threads before installing a new nut. Many times trying to get the old nut out in one piece cracks the lower unit housing which is very expensive.
OEM: 79448
Note: Does Not Fit Bravo 2 Or Bravo 3
 
MAL9-72651   

$6.95 
   
Quantity in Basket: none
Drain Plug, Magnetic, Mercruiser, Mercury, Mariner, OMC, Volvo Outdrives


Draining Screw Set (Magnetic) for all Mercruiser/Mercury/Mariner drives for OMC/Volvo SX drives
Replaces: Mercury # 22-67892A1, 10-14834A1; OMC # 3854539; Volvo # 3854539-8
 
MAL9-72655   

$4.95 
   
Quantity in Basket: none
Plug, Non-magnetic, Gearcase, Mercruiser, Mercury, Mariner, Johnson, Evinrude


Plug, Lower Unit Drain (Non-magnetic)
Replaces: OMC/Johnson/Evinrude 307551; Mercruiser, Mercury/Mariner 10-79953Q2
 
MAL9-76107   

$8.95 

Sorry, MAL9-76107 is temporarily backordered. Please check back later.


Quantity in Basket: none
Oil Seal Prop Shaft for Mercury Mariner and Mercruiser 26-90562


Oil Seal
For Mercury Outboards and Mercruiser Sterndrives
Replaces: Mercury Marine Quicksilver original equipment part # 26-90562; GLM # 85080; Sierra # 18-2011
Shaft Size:  0.750" (19.050mm)
OD:  1.250" (31.750mm)
Width:  0.312" (7.925mm)

 
MAL9-76134   

$13.95 
   
Quantity in Basket: none
Bushing Shift Shaft for Mercury Mariner 23-77631A2


Shift Shaft Bushing for Mercury/Mariner 30 HP 2 Cyl., 40 HP 2/3 Cyl., Inline 6, and V6
OEM: 23-77631A2
 
MAL9-76139   

$19.49 
   
Quantity in Basket: none
Bushing Kit, Shift Shaft, Mercury, Mariner, Force Outboards 23-43052A4


Bushing Kit, Shift Shaft
Replaces: Mercury 23-43052A4
Fits: 90-120 HP Force, 30-125 HP Mercury/Mariner
 
MER32-88006   

$87.95 
   
Quantity in Basket: none
Hose, Power Trim, Mercury, Mariner, Lift, Cylinder to Control Valve


Power Trim Hose, Lift-Cylinder to Control Valve (5') 17/32" O.D.
Fits Mercury/Mariner 35 (2 Cyl), 45 (4 Cyl), 50 (3, 4 Cyl), 60 (3 Cyl), and 140 HP
Genuine Mercury Quicksilver # 32-88006
Replaces: GLM # 26140, Sierra # 18-2111
 
SS00504   

$109.00 

   
Quantity in Basket: none
SkegShield, Mercury, Yamaha, Honda, Tohatsu, Nissan, Force


SkegShield Fits:
Mercury: 40-60 HP 2 & 4 Stroke (Big Foot) 2003-2012; 70-125 HP 2 & 4 Stroke 1983-2012 (including Verado & Optimax)
Force: 70 & 90 HP 1998-2002
Yamaha: 60-100 HP 2 Stroke 1998-2001 (does not fit Vmax concave skegs)
Honda: 75-115 HP 4 Stroke 1995-2007
Nissan: 70-140 HP 2 Stroke 1993-2012
Tohatsu: 70-140 HP 2 Stroke 1993-2012
  • Protects as well as repairs the damaged skeg and help save your prop.
  • Made from high quality marine grade stainless steel .
  • NEW now made in Polished Mirror Finish.
  • No welding required, no epoxies, a do-it-yourself 10 minute application.
  • Custom engineered low profile stainless steel Allen head machine bolt system for easy installation/removal/reuse. All bolts are knurled, enabling locking attributes for high vibration motors.
  • Included are two high tensile strength 5/32 allen wrenches for installation
  • Is custom manufactured to the appropriate size for your specific drive.
  • Drainage hole at the lower backside for when motor is not tilted (storage/boat dock) and will drain from front/top when motor is tilted, protecting from water retention.
  • Superior end cap design with a reinforced lower edge for protection from ramp damage or riverbed,lake bed dragging, and better water/hydro streamlining.
  • Made in the USA with a lifetime limited warranty for the original purchaser.
  •  
    SS00505   

    $109.00 

       
    Quantity in Basket: none
    SkegShield, Mercury Mariner Outboards


    SkegShield, Mercury/Mariner 135-200 HP 2 and 4 Stroke 1978-2004; 225 HP 2 Stroke 1978-1995 Outboards
  • Protects as well as repairs the damaged skeg and help save your prop.
  • Made from high quality marine grade stainless steel.
  • NEW now made in a Polished MIRROR Finish.
  • No welding required, no epoxies, a do-it-yourself 10 minute application.
  • Custom engineered low profile stainless steel Allen head machine bolt system for easy installation/removal/reuse. All bolts are knurled, enabling locking attributes for high vibration motors.
  • Included are two high tensile strength 5/32 allen wrenches for installation
  • Is custom manufactured to the appropriate size for your specific drive.
  • Drainage hole at the lower backside for when motor is not tilted (storage/boat dock) and will drain from front/top when motor is tilted, protecting from water retention.
  • Superior endcap design with a reinforced lower edge for protection from ramp damage or riverbed,lakebed dragging, and better water/hydro streamlining.
  • Made in the USA with a 3 year limited warranty for the original purchaser.
  •  
    SS00513   

    $109.00 

       
    Quantity in Basket: none
    SkegShield, Evinrude 40-50 HP 4 Stroke 99-03, Mercury 40-60 HP 03-12


    SkegShield Fits:
    Evinrude 40-50 HP 4 Stroke (by Suzuki) 1999-2003
    Mercury 40-60 HP 2 and 4 Stroke 2003-2012
  • Protects as well as repairs the damaged skeg and helps save your prop.
  • Drainage hole at the lower backside for when motor is not tilted (storage/boat dock) and will drain from front/top when motor is tilted, protecting from water retention.
  • Made from high quality marine grade stainless steel.
  • New now made in Polished Mirror Finish.
  • No welding required, no epoxies, a do-it-yourself 10 minute application.
  • Included are Four Custom engineered low profile stainless steel Allen head machine bolt system for easy installation/removal/reuse. All bolts are knurled, enabling locking attributes for high vibration motors.
  • Included are two high tensile strength 5/32 allen wrenches for installation
  • Is custom manufactured to the appropriate size for your specific drive.
  • Superior endcap design with a reinforced lower edge for protection from ramp damage or riverbed,lakebed dragging, and better water/hydro streamlining
  • Made in the USA with a 3 year limited warranty for the original purchaser.
  •  
    SS00514   

    $109.00 

    Sorry, SS00514 is temporarily backordered. Please check back later.


    Quantity in Basket: none
    SkegShield, Mercury 150-275 HP Outboards


    SkegShield, Mercury 150-275 HP 2 and 4 Stroke 2005-2012 (including Verado and Optimax); 225 HP 2 Stroke 1996-2004
  • Protects as well as repairs the damaged skeg and helps save your prop.
  • Drainage hole at the lower backside for when motor is not tilted (storage/boat dock) and will drain from front/top when motor is tilted, protecting from water retention.
  • Made from high quality marine grade stainless steel..
  • New now made in Polished Mirror Finish.
  • No welding required, no epoxies, a do-it-yourself 10 minute application.
  • Custom engineered low profile stainless steel Allen head machine bolt system for easy installation/removal/reuse. All bolts are knurled, enabling locking attributes for high vibration motors.
  • Included are two high tensile strength 5/32 allen wrenches for installation
  • Is custom manufactured to the appropriate size for your specific drive.
  • Superior endcap design with a reinforced lower edge for protection from ramp damage or riverbed,lakebed dragging, and better water/hydro streamlining.
  • Made in the USA with a 3 year limited warranty for the original purchaser.
  •  
    SS00517   

    $109.00 

       
    Quantity in Basket: none
    SkegShield, Mercury, Yamaha, Honda, Tohatsu, Nissan, Force, Suzuki


    SkegShield Fits:
    Mercury: 40-60 HP 2 Stroke 1986-2002
    Force: 70-75 HP 2 Stroke 1991-1997
    Yamaha: 40-48, 50-85 HP 2 Stroke 1984-2000
    Honda: 35-50 HP 4 Stroke 1991-2012; 90 HP 4 Stroke 2008-2012
    Suzuki 40-70 HP 4 Stroke 2003-2012
    Nissan/Tohatsu: 35-50 HP 2 Stroke 1993-2012
  • Protects as well as repairs the damaged skeg and helps save your prop.
  • Drainage hole at the lower backside for when motor is not tilted (storage/boat dock) and will drain from front/top when motor is tilted, protecting from water retention.
  • Made from high quality marine grade stainless steel..
  • New now made in Polished Mirror Finish.
  • No welding required, no epoxies, a do-it-yourself 10 minute application.
  • Custom engineered low profile stainless steel Allen head machine bolt system for easy installation/removal/reuse. All bolts are knurled, enabling locking attributes for high vibration motors.
  • Included are two high tensile strength 5/32 allen wrenches for installation
  • Is custom manufactured to the appropriate size for your specific drive.
  • Superior endcap design with a reinforced lower edge for protection from ramp damage or riverbed,lakebed dragging, and better water/hydro streamlining.
  • Made in the USA with a 3 year limited warranty for the original purchaser.
  •  

    Select Parts from an Illustration of Your Engine

    3.9, 4, 4.5, 6, 7.5, 9.8 HP
    6, 8, 9.9, 10, 15 HP
    18XD, 20, 25 HP
    25 HP (4S), 30 HP (2-CYL.), 40 HP, 50 HP (2 & 3-CYL.)
    35-70 HP (2, 3 & 4-CYL.)
    50, 55, 60 HP (3-CYL.) (2-STROKE), 40, 50, 60 HP EFI (4-CYL.) (4-STROKE)
    30-125 HP (3 & 4-CYL.)
    L4, L6 & V6 (65-225 HP)
    3.0L (200 DFI, 225 CARB, 225 & 250 EFI)
    4-STROKE VERADO INLINE 6