177 Fulford Dr.
Harkers Island, NC 28531
(252) 504-3355

Shopping Cart  [more]

Test Equipment Tools

Lifting Eye Tool Replaces Mercury 91-904551

BPI18-9896


Lifting Eye Tool Replaces Mercury 91-904551

LIFTING EYE TOOL Replaces: 91-904551, Sierra 18-9896

$30.95
Switch Remote Starter Diagnositc Tool Mercury Outboard

CDI511-7900


Switch Remote Starter Diagnositc Tool Mercury Outboard

511-7900 Mercury Remote Starter Remote Starter works with most Mercury engines with the small cannon plug style head 1979-2006.  Replaces...

$216.95
Spark Gap Tester, Adjustable, Outboard Engines

CDI511-9763


Spark Gap Tester, Adjustable, Outboard Engines

Enclosed 1 Cyl. Adjustable In-Line Spark Gap Tester Enclosed design helps reduce the possibility of igniting gas fumes. Detachable grounding clamp.

$14.95
... more info
Replacement Available
Spark Gap Tester, Neon Indicator

CDI511-9764


Spark Gap Tester, Neon Indicator

511-9764 Neon Spark Tester 1 Cyl Sealed spark tester can be used inline to the spark plug while the engine is running or it can be connected to...

$36.95
Spark Gap Tester Tool Adjustable 1 to 8 Cylinder 511-9766

CDI511-9766


Spark Gap Tester Tool Adjustable 1 to 8 Cylinder 511-9766

511-9766 Spark Tester Spark tester can be used to test from 1 to 8 cylinders. Sealed design reduces the possibility of fire. NOTE: If extension wires...

$96.95
Wire Piercing Probe Set Outboard Testing Tool CDI511-9770

CDI511-9770


Wire Piercing Probe Set Outboard Testing Tool CDI511-9770

Piercing Probe Set No need to disconnect harness or wires. Fully insulated probes have a spring loaded clamp with a tiny stainless steel pin that...

$93.95
Adapter DC Ampmeter Tool Outboard Motor DVA Testing CDI511-9772

CDI511-9772


Adapter DC Ampmeter Tool Outboard Motor DVA Testing CDI511-9772

511-9772 Ampmeter Adapter Replaces: PL88 Use to replace ignition coil for testing DVA output from ignition pack if a bad coil is suspected. ...

$79.95
Adapter Peak DVA Voltage Test Tool Fluke Meter for Outboard 511-9773

CDI511-9773


Adapter Peak DVA Voltage Test Tool Fluke Meter for Outboard 511-9773

Peak Reading DVA Voltage Adapter for all Fluke digital volt meters. The readings will be close to the Stevens CD77 and Merc-Otronic specs. Ideal...

$113.95
DVA Peak Voltage Adapter without leads

CDI511-9773NL


DVA Peak Voltage Adapter without leads

Peak Reading DVA Voltage Adapter for all Fluke digital volt meters. This adapter does not include the leads. If you require one with leads, please...

$95.95
Load Resistor

CDI511-9775


Load Resistor

Load Resistor To load the output of ignition modules when testing ignition coils. Used for testing DVA outputs from power packs and switch boxes....

$25.95
Multimeter Resistor Test Card

CDI511-9800


Multimeter Resistor Test Card

Resistor Test Card for Multimeters Additional Info: Perfect for calibrating the multimeter before troubleshooting begins, Basic resistance values...

$12.95
Spark Tester Wire

CDI511-9902


Spark Tester Wire

7" Extension Wire for use with the CDI511-9766 Spark Gap Tester (Set of 4) Additional Info: 9.5" Spark plug wire extension. For use w/...

$27.95
Spark Plug Tester Wire Leads

CDI511-9903


Spark Plug Tester Wire Leads

24" Extension Wire for use with the CDI511-9766 Spark Gap Tester (Set of 4) Additional Info: 24" Spark plug wire extensions, For use w/ 511-9766...

$34.95
Multimeter Tool Fluke Meter Volt Meter Ohm Meter CDI 518-116

CDI518-116


Multimeter Tool Fluke Meter Volt Meter Ohm Meter CDI 518-116

Replaces discontinued CDI518-16 (series) meters AutoVolt: automatic AC/DC voltage selection Large white LED backlight to work in poorly lit areas...

$299.95
Fluke 16 Multimeter With DVA Adapter

CDI518-16A


Fluke 16 Multimeter With DVA Adapter

Fluke 16 and Peak Reading Voltage Adapter (CDI511-9773) Most cost effective Fluke meter for marine use. Has voltage, temperature, capacitance, ohms,...

$263.95
... more info
Replacement Available
Thermomelt Temp Stiks, 125 degree F

CDI519-T125


Thermomelt Temp Stiks, 125 degree F

Stevens Thermomelt Temp Stiks, 125°F Long lasting Temp Stiks provide a quick and reliable means to check cooling systems. With engine warmed up,...

$25.95
Thermomelt Temp Stiks, 163 degree F

CDI519-T163


Thermomelt Temp Stiks, 163 degree F

Stevens Thermomelt Temp Stiks, 163°F Long lasting Temp Stiks provide a quick and reliable means to check cooling systems. With engine warmed up,...

$22.95
Gearcase Filler

CDI551-33-1


Gearcase Filler

Gearcase Filler With Check Valve A new design in gearcase fillers makes it easier to fill or flush gearcases. The check valve venting system helps...

$219.95
Adapter, Metric, Grease Filler

CDI551-334M


Adapter, Metric, Grease Filler

Metric Adapter for Grease Filler Replaces 519-34M, 551-33M, 551-34M For all motors except Suzuki. Additional Info: Adapter for 551-33-1 Gearcase...

$13.95
Filler Vent Check Valve

CDI551-33CV


Filler Vent Check Valve

Filler Vent Check Valve Calibrated check valve creates airlock to keep lube from running out while you install drain plug. Includes 4" Hose. A must...

$25.95
Gearcase Filler Metric Adapter

CDI551-33M


Gearcase Filler Metric Adapter

Metric Adapter for all motors except Suzuki for use with CDI551-33GF E-Z Fill.

$8.95
... more info
Replacement Available
Gearcase Filler Metric Adapter CDI551-34M

CDI551-34M


Gearcase Filler Metric Adapter CDI551-34M

Metric Adapter for all motors except Suzuki for use with CDI551-33GF E-Z Fill.

$8.95
... more info
Replacement Available
Pressure Vacuum Tester Tool Outboard and Outdrives CDI 551-34PV

CDI551-34PV


Pressure Vacuum Tester Tool Outboard and Outdrives CDI 551-34PV

Pressure and Vacuum Tester Repairable metal unit does both vacuum and pressure testing. Screws into the fill on most applications and introduces your...

$281.95
Threaded Nozzle, Pressure-Vacuum Tester

CDI551-34TN


Threaded Nozzle, Pressure-Vacuum Tester

Threaded Nozzle Fits and is included in CDI551-34PV Pressure/Vacuum Tester. Additional Info: Threaded Nozzle for 551-34PV Pressure & Vacuum Tester

$13.95
Tool Flywheel Holder Outboard for Mercury OMC Yamaha CDI 551-5110

CDI551-5110


Tool Flywheel Holder Outboard for Mercury OMC Yamaha CDI 551-5110

Flywheel Holder. New design has a high tensil strength, poly coated, woven belt for a more secure grip of flywheel. Longer handle provides a more...

$157.95
Tool Pin Amphenol Tool Set for Johnson Evinrude Outboard CDI 553-2700

CDI553-2700


Tool Pin Amphenol Tool Set for Johnson Evinrude Outboard CDI 553-2700

Amphenol Pin Tool Set Set contains one each of CDI553-2697 (insertion), CDI553-2698 (pin removal), and CDI553-2699 (socket removal) tools. ...

$102.95
Bullet Connector Kit

CDI911-9783


Bullet Connector Kit

Bullet Connector Kit Contains: 10 each Male Bullet with Boots, and 10 Female Bullets with Sleeves. Contains 10 pieces each of the male, female...

$14.95
Wrench Propeller Floating for Mercury Mariner 1-1/16 Inch 91-859046M4

GLM90061


Wrench Propeller Floating for Mercury Mariner 1-1/16 Inch 91-859046M4

1-1/16 Inch Floating Propeller Wrench (blue) for Mercury/Mariner 75, 90, 100, 115, 125, 135, 150, 175, 200, 225, 250 HP OEM: 91-859046M4

$20.95
Propeller Wrench Floating Mercury Mariner 15/16 Inch 91-859046M3

GLM90062


Propeller Wrench Floating Mercury Mariner 15/16 Inch 91-859046M3

15/16 Inch Propeller Wrench (red Color) for Mercury Mariner 30, 40, 50, 60 HP OEM: 91-859046M3

$12.95
Propeller Wrench Floating Mercury Mariner 13/16 Inch 91-859046M2

GLM90063


Propeller Wrench Floating Mercury Mariner 13/16 Inch 91-859046M2

13/16 Inch Floating Propeller Wrench (yellow) for Mercury Mariner 20, 25 HP OEM: 91-859046M2

$12.95
Copyright © 2024 Basic Power Industries.
Call us (252)728-5566