Gearcase Assemblies and Parts

BRP / Gearcase / Cover Nut OEM: Johnson/Evinrude Replaces: BRP 911751 For 1997-97 Johnson/Evinrude V4, 90-115 Hp outboards. also crosses...

Locknut Replaces: OMC 907866 SIE 18-3731 Fits Stringer gearcases. 3/4" x 16

Roller Bearing for Bearing Carrier (Rear) on Johnson/Evinrude, All 45-60 HP 2 Cyl., All 3 Cyl., V4 Most V6, & V8 1985-89; and OMC Stringer/Cobra...

.004 Shim for OMC Stringer OEM: 313204

Water Passage Housing for OMC Cobra Lower Units. OEM: 915720

Bearing Housing for OMC Cobra OEM: 984462

Magnetic Draining Screw Set for all Mercruiser/Mercury/Mariner drives for OMC/Volvo SX drives Replaces: Mercury Quicksilver # 22-67892A1 OMC #...

Bearing Carrier for Johnson Evinrude Outboard and OMC Cobra Outdrives used with 1-3/16" diameter Propeller Shaft comes with key GLM11081. It contains...

Bearing Carrier for OMC Sterndrives and Johnson Evinrude outboards. It will fit the following applications with a 1-1/4" diameter shaft: OMC Cobra...

Tube, fits OMC Cobra, connects between Lower and Upper Units OEM911706

Guide used to connect lower and upper units on OMC Cobra OEM: 911715

Lower Gear Housing Shift Rod Assembly for an OMC Sterndrive. It will fit a Cobra V6 & V8 from 1986-1993, and the 3.0L 4-Cyl. from 1990-1993. The kit...

Cover Nut Spaner Nut fits Cobra Upper Unit 1986-1993 OEM: 911751

Bearing Housing and Seal for an OMC Sterndrive. It goes on the lower unit and the driveshaft goes through it for a Stringer Drive lower unit from...

Shift Cradle Housing & Bearing assembly for an OMC Sterndrive. It is located on the front of the Propeller shaft of a Stringer drive Lower Unit from...

Housing and Bearing Assembly Includes GLM22870 Roller Bearing (OEM 382407) OEM: 391365 Fits: OMC Cobra 4 Cylinder 1986-1989 3.0L, 1987-1990 2.3L OMC...

Cover and Seal Plate Assembly for OMC Cobra Outdrives. Fits from 1986 to 1993 OMC Cobra Outdrives. Seal Included Replaces OEM: 986838

Water Passage Housing for OMC Cobra Lower Units. OEM: 915720

Drive Shaft Bearing Housing for OMC Cobra. This is the housing that the drive shaft from the lower unit goes through on 1986 thru 1993 OMC Cobra...

Swivel bearing Retainer for an OMC Sterndrive. It goes on the Vertical Driveshaft of a Stringer Outdrive from 1978 to 1985. The seals are included....

This Bearing Carrier was used on all OMC Cobras from 1986 thru 1993. It is located in the upper housing and holds the upper and lower bearings for...

Lower Gearcase Assembly for OMC Stringer Models: 3.8L/229 CID GM V6 (1981-1985); 4.3L/262 CID GM V6 (1985); 5.0L/305 CID GM V8 (1978-1985); 5.7L/350...

Empty Lower Unit Gear Housing for OMC Cobra Stern Drives: 4.3L & 5.0, 5.7, 5.8 Engines from 1986 thru 1993 3.0L 4 Cylinder from 1990 thru 1993. This...

Complete Gear Housing Assembly (without shift shaft) for OMC Stringer Fits: all 4 cyl. Engines (1978-1985); 3.8L/229 CID GM V6 (1981-1985); 4.3L/262...

complete Lower Gear Housing Gear kit for an OMC Cobra Sterndrive. This kit contains all of the necessary parts to assemble the Lower unit, including...

Complete Lower Gear Housing Assembly Kit for an OMC Stringer Drive. It has a 1.86 Ratio, with a Prop Shaft Diameter of 1-1/4". This kit is for...

Seal for GLM12960 Tube, fits OMC Cobra Lower Unit OEM: 911705