 |  |
 Nobody Beats Our Deal
|
177 Fulford Dr.
Harkers Island, NC 28531
(252) 504-3355
Categories
- Mercruiser Sterndrives
- Mercruiser Inboards
- OMC Sterndrives
- OMC Inboards
- Detroit Diesel
- Volvo Penta Sterndrives
- Volvo Penta Inboards
- Crusader Inboards
- Pleasurecraft (PCM) Inboards
- Chris Craft Inboards
- Chrysler Inboards
- Marine Power Inboards
- Engines (New & Remanufactured)
- Indmar Inboards
- |_ Controls and Steering
- |_ Cooling
- |_ Electrical System
- |_ Engine System
- |_ Exhaust System
- |_ Exhaust Gaskets Hardware Mounting Kits
- |_ Exhaust Manifold Riser Kits
- |_ Manifolds
- |_ Risers
- |_ Fuel System
- Detroit Diesel Parts
- Volvo Penta Diesel Inboards
- Yanmar Diesel Inboards
- Caterpillar Diesel Inboards
- Cummins Diesel Inboards
- Outboard Parts
- Personal Water Craft
- All Applications
- Propellers
- Diesel Engines
- Used Engines
- Used Items
- Marine Transmissions and Parts - Borg Warner Velvet Drive - ZF Hurth - Paragon
- Fishing Tackle
- Decals and Stickers
- T & H Marine Products
- Holding
Exhaust Gaskets Hardware Mounting Kits
BAR50-525-019
Fitting Water Bronze for Exhaust Manifolds and Risers 3/4 NPT to 3/4 Hose
90° bronze elbow fitting has 3/4" NPT on one end and 3/4" Hose Barb on the other. 3/4 Pipe is the most popular thread size for Marine...
$27.95
BARMC-1-0000
Adapter Exhaust Manifold for 3.0L New Engine to Old Exhaust Manifold BARMC-1-0000
Exhaust adapter with gaskets. Converts newer 3.0 Liter 181 Cubic inch engines exhaust port configuration to the older style exhaust manifold. Allows...
$109.95
BARMC-50-806926
Elbow Fitting 90 Degree Brass 3/4" NPT 1" Hose End
90 degree brass elbow drain cock generally used as a drain on most center-rise manifolds. It has a 3/4" N.P.T. thread with a 1.0" hose end.
$27.95
BPI18-4218
Drain Cock 1/4 NPT for Engine Blocks Manifolds and Heat Exchangers
Drain Cock or Tap. Install this in any 1/4 NPT hole to allow for easy winterization. GM engine blocks and many exhaust manifolds use this size. Tech...
$9.95
GLM53781
Manifold, Riser Mounting Kit, GM 305 5.0L, 350 5.7L V8, Barr, Indmar, Marine Power
Barr Style Exhaust Mounting Kit includes 2 Manifold Gaskets, 2 Riser Gaskets and hardware. Fits Small Block GM V8 with Barr Style Manifolds
$35.95
GLM53782
Manifold, Riser Mounting Kit, GM 454 7.4L, 502 8.2L V8, Barr, Indmar, Marine Power
Barr Style Exhaust Mounting Kit. It includes 2 Manifold Gaskets, 2 Riser Gaskets and hardware. This kit Fits Big Block GM V8 with Barr Style...
$48.95
OSC992-G
Gasket Riser for Barr Generic and Indmar OEM Risers 1-0107
Gasket Riser for Barr Generic and Indmar OEM Risers. Use by Marine Power and Some Crusader Champion Series Engines. Gasket allows water to flow...
$7.00
OSC992-G-FW
Gasket Riser for Generic Barr and Indmar Style Blockoff FWC 1-0105
Riser Gasket for Barr Style, Marine Power and Indmar Fresh Water Cooled applications. Does not allow water flow between the Manifold and Riser....
$7.00
OSCCV-GH
Gasket, Manifold for GM 305 5.0L, 350 5.7L V8
Manifold Gasket for GM 5.0/5.7L 305/350 cid BARCHV47-0000 CHV47-0000
$9.95
OSCCW994-MK
Mounting Kit, Manifold , for Barr Style GM 454 7.4L, 502 8.2L V8
Manifold Mounting Kit for Osco # CW994 Manifolds Big Block GM V8 with Barr Style Manifolds
$12.95
OSCF66C9
Fitting, for Manifold Hose, 3⁄4" NPT X 3⁄4" Hose Barb 90 Degree
90° brass elbow fitting has 3/4" NPT on one end and 3/4" Hose Barb on the other.
$19.95
OSCF66CS
Fitting, Water, 3⁄4" X 3⁄4", for Chrysler, Indmar, PCM
Water Fitting, 3/4" NPT X 3/4" Hose Barb for Chyrysler, Indmar, Pleasurecraft and others Fits Osco # 106T Front End Plate, Osco # 826, Osco...
$7.95
OSCF68C9
Brass Fitting for Manifold Hose Barb .75 inch X 1 inch 90 Degree
3/4" NPT X 1" ID 90° Hose Barb elbow. Uses 1 Inch inside diameter water hose. Replaces the Following OEM numbers:
$15.95
OSCFL-GH
Gasket , Manifold, for Ford 302 5.0L, 351 5.8L V8
Manifold Gasket for Ford 5.0/5.8L 302/351 cid
$8.00
OSCFL994-MK
Mounting Kit, Manifold, for OSCFL994 Manifolds
Mounting Kit fits Osco # FL994 manifolds Replaces: Sierra # 18-8538; Mallory # 9-40172
$13.50
Copyright © 2024 Basic Power Industries.
