Home
Log In

Nobody Beats Our Deal

Retrieve Shopping Cart by email address.
Click here and enter email address.

177 Fulford Dr.
Harkers Island, NC 28531
(252) 504-3355

Check Your Order Status
(Tracking Information)

Information

Home :: Marine Transmissions and Parts - Borg Warner Velvet Drive - ZF Hurth - Paragon :: Hurth Transmission Parts

Hurth Transmission Parts

Displaying 1 to 30 (of 75 products)

630VDRIVEINT

ZF 630V Drive 1.6:1 Ratio Internal parts

Used marine items have no warranty and are sold "as-is". Only Bank Wire Transfer or Postal Money Orders may be used for payment. ZF 630V 1.6:1 Ratio...

$999.99

ALT23350A-M

Pump for Velvet Drive Borg Warner Marine Transmission Hydraulic Replaces 71C-A60 With Anti Seal Blowout Modification

Hydraulic Pump without backing plate, fits all Borg Warner Velvet Drive Marine Transmissions 10-17, 10-18, 71 & 72 series for Borg Warner Velvet...

$259.95

ALT315401

Oil Seal Output Shaft Hurth Marine HSW 450A-2 Transmissions 374056

Metal Clad Oil Seal for Output Shaft on Hurth Marine HSW 450A-2 model transmissions Replaces Hurth original equipment part # 374056

$16.95

ALT315402

Seal Metal Clad, Control Valve for ZF 45, 63 and 800

Seal, Control Valve for ZF 45, 63 and 800 METAL CLAD SEAL HURTH HSW450A-2 DIST SHFT HSW450A HSW630A HSW800A ------------- ZF45A ZF63A ZF800A

$21.95

ALT315750

Clutch Plate Module Hurth HSW 450A-2 8 Bronze 10 Steel Plates

Clutch Plate Module Hurth HSW 450A-2 Includes (8 Bronze Plates, 10 Steel Plates).

$392.95

ALT315800

Gasket Kit Overhaul for Hurth ZF HSW450A-2 Marine Transmission

Overhaul Kit for Hurth HSW 450A-2 Transmission, Which is also called a ZF45A. Includes Gaskets, O-rings, Metal Clad Seals and Sealing Rings

$49.95

ALT315802

Overhaul Kit for ZF Marine HSW450D ZF45C ZFC-W HSW630D ZF63C 1:1 Ratio

Overhaul Kit for ZF Marine HSW450D, ZF45C, ZFC-W, HSW630D, ZF63C Contains: 8 O-rings, 3 MCS seals, 2 Aluminum Washers, & 1 Rubber Pad Alto # 315802

$109.95

ALT315900

Overhaul Rebuild Kit Hurth ZF Marine Transmission HSW450A-2 ZF45A

Master Overhaul Kit for Hurth HSW450A-2 and ZF45A Transmissions. This fits the transmission with a down angle. Fits all reduction units. Includes all...

$459.95

ALT316187-396

Washer Thrust for Hurth Marine Transmission HBW 5, 50, 100 288748

Thrust Washer (OE Design) Fits Hurth Marine HBW 5, 50, 100 Marine Transmissions. ID 27.25MM OD 49.9MM Replaces: Hurth original equipment part # 288748

$44.95

ALT316188

Washer Thrust for Hurth Marine Transmission HBW 10, 150 344787

Thrust Washer for Hurth Marine Transmissions Fits Hurth HBW 10 and 150 ID: 31.6MM OD: 53.75MM Replaces Hurth original equipment part # 344787

$31.95

ALT316189

Washer Thrust for Hurth Marine HBW 20, 220, 250 327395 277109

Washer Thrust for Hurth Marine HBW 20, 220, 250 Fits Hurth Marine Models HBW 20, 220, 250 ID: 32MM OD 64.4MM Replaces Hurth part #s: 327395, 277109

$39.95

ALT316403

Seal Metal Clad Front for Hurth Marine HBW 10 150 150V Transmissions 215875

Metal Clad Front Oil Seal for Hurth Marine HBW 10, 150 and 150V Transmissions Dimensions:52x30 Replaces Hurth original equipment part # 215875

$8.95

ALT316404

Seal Metal Clad Rear for Hurth Marine HBW 10 150 20 220 250 Transmissions 105159

Metal Clad Rear Seal for Hurth HBW 10, 150, 20, 220, 250 Marine Transmissions Dimensions:52x40 Replaces Hurth original equipment part # 105159

$12.95

ALT316405

Seal Metal Clad Input Shaft for Hurth 20 220 250 800 630 450 413883

Metal Clad Seal - Input Shaft for the following Hurth Marine Transmission models: HBW 20, 220, 250 HSW 800 Series (Reduction) & V Drive HSW...

$18.95

ALT316406

Seal Metal Clad Rear for Hurth Marine HBW 150V Transmission 401647

Metal Clad Rear Seal for Hurth Marine HBW 150V Transmissions 2 required per transmission OD: 90mm ID: 65mm Replaces Hurth original equipment part #...

$18.95

ALT316407

Seal Output for Hurth HSW630 HSW630A ZF63A Marine Transmissions 26-813292

Rear Seal Hurth HSW630, HSW630A Reduction Transmissions. Dimensions:OD: 95mm ID: 73mm Replaces Hurth original equipment part # 634319104

$15.95

ALT316407A

Seal Metal Clad Output Reduction for Hurth HSW 800 Reduction 634319104

Rear Seal Hurth HSW800 Reduction Transmissions. Dimensions:OD: 95mm ID: 73mm Replaces Hurth original equipment part # 634319104

$15.95

ALT316408

Seal Output for Hurth Marine HSW 630 V Drive Transmissions 105-113 444-070

Seal for Output Shaft on Hurth V Drive Marine Transmissions Fits the following models: HSW 630 V Drive Transmissions Dimensions:85x110x12 This seal...

$36.95

ALT316408A

Seal Output for Hurth Marine HSW 800 Series V Drive 634319104

Metal Clad Seal for Hurth HSW800 V-Drive Transmissions. Dimensions:105x130x12 For Hurth HSW 800 Series V-Drive Marine Transmissions This is the...

$46.95

ALT316409

Seal Output for Hurth Marine HSW 630 Series V-Drive 444-071 26-811957

Seal for Output Shaft on HWS 630 V-Drive Transmissions. This seal is closest to the Propeller and is the smaller of the two output shaft seals....

$39.95

ALT316409A

Seal Output V-Drive Hurth Marine HSW 800 Series Transmissions 480Â-762

Rear Seal Output Shaft for HSW 800 Series V-Drive Transmissions. This is the smaller seal closest to the PROPELLER. Dimensions: 80x100x10 Replaces...

$49.95

ALT316410

Seal Shift Lever Hurth HBW 5 10 20 50 100 150 150V 220 250 Transmission 106864

Meatal Clad Seal for Shift Lever on Hurth Marine Transmissions Fits the following HBW models: 5, 10, 20, 50, 100, 150, 150V, 220, 250 Replaces Hurth...

$7.95