Gaskets and Mounting Kits Hardware

Manifold to cylinder head mounting kit (Order (1) of the appropriate mounting kits according to your requirements). Fits CHRYSLER V8-273, 318, 340,...

This is the Copper Tube used in a Chrysler Manifold. This is used in Chrysler Small Blocks (318/360) with end Riser Manifolds. Its purpose is to...

This item is a front plate that fits on Chrysler small block (318/360 c.i.d.) that uses the log style manifold. The plate is tapped and threaded for...

Stainless steel manifold to cylinder head mounting kit (includes stainless studs, nuts, manifold to head gaskets and brass drain plugs). Note: The...

Mounting kit for upper riser/elbow (includes sleeve, O-rings, retainers, bolts and pipe plugs).

Riser Gasket for Chrysler Inboard V8 318, and 360 CID, 1986 and newer. This gasket installs between the Riser and Adapter Plate and allows water to...

Riser Gasket for Chrysler Inboard V8 318 and 360 CID, 1986 and newer with fresh water cooled exhaust manifolds. This gasket is installed between the...

Riser Gasket for Chrysler Inboard V8 318 and 360 CID 1986 and newer with center rise raw water cooled exhaust manifolds. This gasket is installed...

Riser Gasket for Chrysler Inboard V8 273, 318, 340, and 360 CID, 1986 and newer with fresh water cooled manifolds. This gasket is installed between...

End Plate Gasket fits Osco # 150 end plates Replaces: Chrysler original equipment part # 3619665; Barr # CM-1-5972-C; Sierra # 18-0471; Mallory #...

Elbow Mounting Kit fits Chrysler # 2600402; Osco # 0402; Barr # CM-20-2600402; Sierra # 18-6600 lower exhaust elbows Replaces: Sierra # 18-8501;...

Water Distribution Tube for Chrysler Big Block, replacement water distribution tube Replaces Barr # CM-1-5972D; Mallory # 9-40341

End Plate Gasket or an Elbow/Riser Gasket used on a Chrysler Small Block (318/360) with a log style manifold with Raw Water Cooling (no heat...

Gasket used on an End plate, Riser, or Elbow on Chrysler Exhaust with Fresh water (with heat exchanger) cooling. End Plate Gasket (blank) fits Osco #...

End Plate Mounting Kit with Open Gasket fits Osco # 106T end plates Replaces: Barr # CM-1-6672B-P; Sierra # 18-4360; Mallory # 9-40373

End Plate Mounting Kit with Blocked Gasket fits Osco # 106T end plates on Fresh Water Cooled Chrysler applications. Replaces: Sierra # 18-8506;...

Mounting Kit fits Osco # 7081 manifolds Replaces: Sierra # 18-8517; Mallory # 9-40370

Stainless Steel Riser Sleeve fits Osco # 5639 riser

Mounting Kit for a Chrysler Swivel Elbow and Extension. It fits Osco # 5639 riser. It was used on the 318/360 small block, and the 383/440 big block....

O-Ring Kit fits Osco # 5639 riser Replaces: Chrysler # 7087-OR; Barr # CM-20-9225 & 6; Sierra # 18-7512; Mallory # 9-40374

Exhaust Manifold Gasket for a Chrysler. It will fit all Small Block (318/360) with end riser manifolds. It is used with manifold Osco # 826.

Manifold Mounting Kit for a log style manifold on a Chrysler small block (318/360). This kit contains the mounting bolts and gaskets for one...

Exhaust Manifold Mounting Kit for a Small Block Chrysler 318 340 360 with a log style rear riser manifold (Osco # 826). This kit includes the gaskets...

Water Fitting, 1/2" NPT X 3/4" Hose Barb for Chrysler Applications Fits Osco # 0402, Osco # 689, and Osco # 9234 Risers

Water Fitting, 3/4" NPT X 3/4" Hose Barb for Chyrysler, Indmar, Pleasurecraft and others Fits Osco # 106T Front End Plate, Osco # 826, Osco...