Risers Elbows Spacers

Swivel type high discharge Exhaust Riser. Generic Style that is held on with two clamps with 4 bolts. 8-1/2" Riser protectionRequires 1 Barr #...

Cast Iron swivel type 90° exhaust elbow connector with internal water discharge. Accepts 2-1/2" to 3" ID exhaust hose. This style elbow is held...

Exhaust connector for 3" I.D. exhaust hose. Connects to Barr # 20-0039 Riser by using a Barr # 20-0002P mounting kit (1 per connector).

Exhaust connector for 2-1/2" I.D. exhaust hose. Connects to Barr # 20-0039 Riser by using a Barr # 20-0002P mounting kit (1 per connector).

Fully jacketed swivel-type Exhaust Riser 7" Riser Protection Requires 2 Barr # 20-0002P mounting hardware kits per riser  1 to mount to...

Swivel type 30 degree exhaust elbow connector; fully jacketed. Accepts 2-1/2 Inch or 3 Inch I.D. exhaust hose. Fits the Generic Barr or Osco style...

Exhaust Elbow Riser with a 3 Inch 10° outlet. The riser mounting pad is 3-5/8 x 5-5/8 with mounting bolt centers 2-5/8 x 4 inches. Fits...

Riser Spacer Block 3 Inch high that is used on Barr Style and Marine Power center riser manifolds. It goes between the riser and the manifold to...

Exhaust elbow deflector used on Chris Craft applications with small block chevrolet V-8 engines. Goes between the exhaust riser and the tail piece...

Exhaust Outlet, measures 2 1/2" for hose, used on the older Chris Craft rear riser applications. It is used with the log style manifold on Chevrolet...

Exhaust riser used on the port side of Chris Craft Engines with a small block GM engine and "log" style manifolds. Includes Gaskets (not pictured) It...

Exhaust riser used on the starboard side of a Chris Craft with a small block engine and "log" style manifolds. Comes with gaskets (Not Pictured) It...

Riser Spacer Block 3 Inch high that is used on Barr Style and Marine Power center riser manifolds. It goes between the riser and the manifold to...