GM Small Block Vortec V8 305 5.0L (1 Piece Rear Seal Center Valve Cover 8 Bolt Intake)(1998 and newer)

Bearings

ACL5C290SCam Bearing for GM 5.0L 305 CID 5.7L 350 CID Small Block V8
Price: $21.95
Weight: 0.51
Cam Bearing fits GM Small Block V8, 305-350 CID, 5.0L-5.7L
Roller Cam, 8-Bolt Intake, Chain Drive LH Rotation
ACL5M909
Click To Select Size		Main Bearing for GM 5.0L 305 CID 5.7L 350 CID Small Block V8
Price: $31.95
Weight: 1.09		Main Bearing fits GM Small Block V8 305-350 CID, 5.0L, 5.7L
Roller Cam, 8-Bolt Intake, Chain Drive LH Rotation
ACL8B663
Click To Select Size		Rod Bearings for GM 5.0L 305 CID 5.7L 350 CID Small Block V8
Price: $24.95
Weight: 0.73		Rod Bearing fits GM Small Block V8 305-350 CID, 5.0L, 5.7L
Roller Cam, 8-Bolt Intake, Chain Drive LH Rotation

Freeze Plugs

FED381-8059Freeze Plug Set for GM V6 and Small Block V8 Marine Engines
Price: $18.95
Weight: 0.76
Expansion Plug Engine set for a GM V6 and small block V8. These expansion plugs (freeze plugs) are made of Brass for Marine use.
Roller Cam, 8-Bolt Intake, Chain Drive LH Rotation

Gaskets and Seals

AP1055Seal Timing Cover for GM Inline 4 6 and Small Block V8 LH Mercruiser Volvo
Price: $20.95
Weight: 0.47
Timing Cover Seal for LH GM 2.5L-5.7L Engines (inline and Small Block) Replaces: Mercruiser Quicksilver original equipment part #s: 26-79223, 26-97335, 26-59341; Crusader original equipment part # 7080310; OMC / Volvo Penta original equipment part # 3853341
Roller Cam, 8-Bolt Intake, Chain Drive LH Rotation
GLM30380Gasket Carburetor Mounting for Rochester 4 BBL Marine Carburetors
Price: $6.95
Weight: 3.34
Gasket Carburetor Mounting 4BBL Rochester.
Fits The Following Crusader Applications:
  • C454 (454 C.I.D.) V-8
  • C220 (305 C.I.D.)
  • C270 (350 C.I.D.)

Roller Cam, 8-Bolt Intake, Chain Drive LH Rotation
GLM32180Carburetor Gasket, Mercruiser 2-bbl Mercarb
Price: $3.95
Weight: 0.04
Carburetor Gasket for Rochester & Mercarb 2-bbl Carburetor
OEM: 27-807982
Roller Cam, 8-Bolt Intake, Chain Drive LH Rotation
OSCCV-GHGasket, Manifold for GM 305 5.0L, 350 5.7L V8
Price: $9.95
Weight: 0.50
Quantity in Package: 1 each
Manifold Gasket for GM 5.0/5.7L 305/350 cid
BARCHV47-0000
CHV47-0000
Roller Cam, 8-Bolt Intake, Chain Drive LH Rotation
SMI27105Thermostat Housing Gasket, GM V6-V8
Price: $4.95
Weight: 0.03
Thermostat Housing Gasket for GM V6 and V8. This gasket is special to the marine industry because it has a grounding grommet to ground the therrmostat to the block because the senders that are in your thermostat housing do not work well without a good ground.
Roller Cam, 8-Bolt Intake, Chain Drive LH Rotation
VIC3514VMGasket Head Marine for GM 305 CID 5.0L Mercruier OMC Volvo Crusader
Price: $49.95
Weight: 0.60
Quantity in Package: 1 each
Head Gasket Marine (0.28") for a GM Small Block V8 305 CID.
Roller Cam, 8-Bolt Intake, Chain Drive LH Rotation
VICCS5793VMGasket Lower Set Marine GM V8 Small Block 1986 Later for 1 Piece Seal
Price: $124.95
Weight: 3.45
Lower Gasket (Assembly) Set for Chevrolet 305 cid (5.0L) and 350 cid (5.7L) small block V8s with a 1-piece rear main seal
(as pictured)
Fits: Chris Craft, Flagship Marine, Hardin Marine, Indmar Marine, Marine Power, Mercruiser, OMC, PCM, Crusader, Volvo Penta and Yamaha applications.
Includes:
  • crankshaft sealsdistributor mounting gasket
  • fuel pump gasket
  • fuel pump plate gasket
  • oil filter gasket
  • oil pan gasket
  • oil pan plug gasket
  • 14 ml packet silicone gasketing
  • timing cover gasket
  • timing cover seal
  • water pump gasket
  • water pump plate gasket

    • NOTE: Assembly Set Head Set = Overhaul Set
    Roller Cam, 8-Bolt Intake, Chain Drive LH Rotation
    VICHSSB305-87-UPGasket Head Set Marine Small Block 5.0L 305 GM V8 1987 and Newer
    Price: $159.95
    Weight: 6.00
    		Head Gasket Set for 1987 and newer GM 5.0L 305 CID Small Block V8
    Will fit late model as well as Vortec Small Block
    Includes: (1) Gasket Set, Head for GM 305 5.0L Small Block V8 (with Center Bolt Valve Covers) and (1) Intake Manifold Gasket Set For GM Small Block V8 Vortec 1998 and newer (with 8 bolt intake). Includes everything pictured.
    Roller Cam, 8-Bolt Intake, Chain Drive LH Rotation
    VICJV564Seal Rear Main for GM V6 and SB V8 1 Piece Reverse Rotation
    Price: $99.95
    Weight: 0.10
    Quantity in Package:
    		1 Piece Rear Main Seal for GM 4.3L 262 cid V6 and 5.0L /5.7L 305/350 cid Small Block V8, Used in Inboard Engines with Reverse Rotation.
    Fits Chris Craft, Flagship, Hardin Marine, Indmar, Marine Power, Mercruiser, OMC, PCM, Crusader, Volvo and Yamaha 1-Piece rear main seal, reverse rotation applications.
    Roller Cam, 8-Bolt Intake, Chain Drive LH Rotation
    VICMS16167Gasket Intake Manifold Set GM Vortec 5.0L 5.7L 27-807473A1
    Price: $39.95
    Weight: 0.52
    Quantity in Package:
    		Intake Manifold Gasket Set, Vortec GM 5.0L, 5.7L
    Fits all V8 engines with 8 Bolt intake manifold
    used by all marine engine manufacturers since 1998. Includes both side gaskets.
    Use black silicone for the end rail seals. This is considered the Vortec engine.
    Replaces: Mercruiser # 27-807473A1; Indmar # S556099; Sierra # 18-0488
    Roller Cam, 8-Bolt Intake, Chain Drive LH Rotation
    VICOS32496BGasket Oil Pan for GM Small Block V8 1 Piece Seal
    Price: $33.95
    Weight: 3.63
    		Oil Pan Gasket for all GM 5.0L/5.7L 305/350 cid Small Block engines with a 1 piece rear main seal, 1986 and later.
    Roller Cam, 8-Bolt Intake, Chain Drive LH Rotation

    Oil Pumps

    MELIS55EShaft, Oil Pump, GM Small Block with Steel Sleeve
    Price: $11.95
    Weight: 0.29
    		Oil Pump Shaft for GM Small Block V8 with Steel Sleeve
    Roller Cam, 8-Bolt Intake, Chain Drive LH Rotation
    MELM155Oil Pump GM V6, V8 Late Model
    Price: $44.95
    Weight: 3.75
    		Oil Pump for GM 262 cid V6 LX Gen. II SN: OF601127 & up
    and V8
    THIS OIL PUMP HAS A 3/4" OIL INLET
    Roller Cam, 8-Bolt Intake, Chain Drive LH Rotation

    Pistons

    ZF Hurth Marine Transmission ZF45A 2.03:1 Ratio Brand New 3311001016
    Price: $300.00
    Weight: 3.00
    ZF Model 45A is a hydraulic 8 Degree Down-Angle Marine transmission..

    Can turn a LH or RH Propeller but can only be used on a LH Engine. Great for those repowering with newer LH engines and keeping opposite rotation props.
    • Max RPM 5500
    • Weight 62 lbs / 28 kg
    • Offset 126 mm
    • Angle 8°
    • Can Ship By UPS!
    2.03:1 Ratio

    Brand New.

    ZF PART NUMBER:3311001016
    2 Available at this time!
    Roller Cam, 8-Bolt Intake, Chain Drive LH Rotation
    FEDH817PPiston Hypereutectic for GM 5.7L 350 CID Small Block Vortec V8 1998-up
    Price: $40.95
    Weight: 1.44
    Quantity in Package:
    		Hypereutectic Piston for GM Vortec 5.7 350 cid Small Block V8 1998 and newer
    Bore: 4.000 in./101.600mm
    Recessed piston design is 0.080 inch deep x 3.020 inch diameter.
    Piston Style: Dish, with four valve reliefs
    Piston Material: Hypereutectic aluminum
    Compression Distance (in): 1.550 in.
    Wrist Pin Style: Press-fit
    Pin Diameter: 0.928 in.
    Piston Ring Thickness: 1.50mm x 1.50mm x 3.00mm
    Sold individually.
    Roller Cam, 8-Bolt Intake, Chain Drive LH Rotation

    Rings

    HAS5499Piston Ring Set, GM 305 cid
    Price: $36.95
    Weight: 1.06
    		Piston Ring Set for GM 305 cid V8
    BORE: 3.736"
    COMPRESSION GROOVE(S):2.0/2.0 mm
    OIL GROOVE: 4.75 mm
    Please verify your Ring thickness before ordering.
    Ring Sets are Non-Returnable.
    This set includes Piston Rings for all of the Pistons in your engine (1 set per engine)
    Roller Cam, 8-Bolt Intake, Chain Drive LH Rotation

    Valve Train

    FEDCS-808Camshaft Marine for GM Small Block Vortec V8 LH 98-up Roller Lifter
    Price: $399.95
    Weight: 9.12
    		Roller Cam for Vortec Small Block V8, GM 305/5.0L and 350/5.7L LH Rotation
    Roller Cam, 8-Bolt Intake, Chain Drive LH Rotation
    MEL3-202SAChain Timing Set 3 Piece for GM 5.0 305 5.7L 350 CID Roller Cam Engines
    Price: $69.95
    Weight: 3.16
    		3 Piece Timing Gear Set for 5.0L 305, 5.7L 350, 6.2 377 383 GM V8 Engine 1997 and newer for roller camshaft.
    Includes: (202) Chain, (S784) 36 Teeth .275/.285 wide Cam Sprocket and (S645)18 Teeth .275/.285 wide Crank Srpocket
    • Single Row Timing Set for Factory Roller Camshaft Engines
    • Fits Under Steel and Plastic Timing Covers

    Roller Cam, 8-Bolt Intake, Chain Drive LH Rotation
    MELJB-2079Lifter Hydraulic Roller GM 4.3L 5.0L 5.7L 6.2L 811844 1
    Price: $15.95
    Weight: 1.13
    		Hydraulic Roller Lifter. Fits GM 4.3L V6 and small block V8 with steel roller lifter cam Left Hand or Right Hand Rotation.
    Replaces Mercruiser Number: 811844 1
    Roller Cam, 8-Bolt Intake, Chain Drive LH Rotation
    MELMPR-373Push Rod for GM 4.3L 5.0L 5.7L 6.2L 5/16 Fits Roller Camshaft Engines
    Price: $8.95
    Weight: 0.62
    		Push Rod for GM Vortec V6 and Small Block V8 Marine Engines.
    Use with hydraulic roller lifter cam
    Roller Cam, 8-Bolt Intake, Chain Drive LH Rotation
    MELMRK651Rocker Arm Kit, GM Small Block Vortec V8 LH
    Price: $8.95
    Weight: 0.28
    		Rocker Arm Kit for GM Small Block Vortec V8
    Fits 305/5.0L and 350/5.7L LH rotation.
    • Has Detent to Keep Rocker Arm on Valve Stem
    • Includes Rocker Arm Fulcrum and Nut

    Roller Cam, 8-Bolt Intake, Chain Drive LH Rotation
    MELV1194Valve, Intake GM SB V8 1.72
    Price: $12.95
    Weight: 0.54
    		Intake Valve for GM Small Block V8 1.72
    Roller Cam, 8-Bolt Intake, Chain Drive LH Rotation
    MELV1195Valve, Intake, GM Small Block,1.94 Inch
    Price: $8.95
    Weight: 0.55
    		Intake Valve, GM Small Block V8, 1.94" diameter
    Roller Cam, 8-Bolt Intake, Chain Drive LH Rotation
    MELV1206Valve, Exhaust GM SB V8 1.50
    Price: $21.95
    Weight: 0.54
    		Exhaust Valve for GM Small Block V8 - 1.50"
    Roller Cam, 8-Bolt Intake, Chain Drive LH Rotation

    Other Engine Items

    QSTBPI62818Cover Timing Plastic 5.0L 5.7L 6.2L without Sensor Port
    Price: $77.95
    Weight: 2.20
    Quantity in Package:
    		Fits all small block GM engines with plastic timing cover normally 1998 & up.
    Sensor NOT INCLUDED
    Does not include Sensor Port. If you require a timing cover with a sensor Port, please order QSTBPI62818WS.
    • Includes seal and O-ring gasket and bolts
    • Will not replace steel timing cover on earlier engines
    • Only for standard Rotation engines

    Roller Cam, 8-Bolt Intake, Chain Drive LH Rotation
    QSTBPI62818WSMarine Plastic Timing Cover 5.7 with Crank Position Sensor Port 863396001
    Price: $79.95
    Weight: 1.70
    Quantity in Package:
    		Fits all 5.7L Models with plastic timing cover (normally 1998 & up)
    Includes seal and O-ring gasket. Will not replace steel timing cover.

    Replaces Mercruiser: 863396001

    Sensor Port INCLUDED
    Includes Sensor Port. If you do not require a timing cover with a sensor, please order QSTBPI62818.
    Roller Cam, 8-Bolt Intake, Chain Drive LH Rotation
    QSTHB350NBolt Set Cylinder Head for GM Chevy Small Block Engines For Both Heads
    Price: $49.95
    Weight: 4.16
    		Fits all GM small block marine engines 283 327 305 350 377.

    One kit has enough bolts for both cylinder heads.

    Thread sealant pre-installed on the threads because they go into the water jacket of the engine and must be sealed.
    Roller Cam, 8-Bolt Intake, Chain Drive LH Rotation
    QSTOP5.7METRICOil Pan GM 5.0L 305, 5.7L 350, 377 383 6.2L Small Block V8 96 Metric Drain Plug
    Price: $109.95
    Weight: 9.74
    		Marine Oil Pan
  • For Vortec GM 305,350,377,383, 6.2L cid Small Block V8 Engines with 1-piece rear main seal as used by Mercruiser Volvo Marine Power Indmar PCM and Crusader.
  • Replaces Mercury Marine Quicksilver # 808588
  • Fits 1996 and newer with metric oil pan drain plug 12mm X 1.75mm
    • comparison of standard and metric oil pan plugs
    • Oil pan has no baffle
    • Oil pan drain plug is 12mm X 1.75mm

    Roller Cam, 8-Bolt Intake, Chain Drive LH Rotation