GM 4.3L V6 262 CID Flat Tappet (2 Piece Rear Seal)
|
Bearings |
ACL6B1358
Click To Select Size | Rod Bearing for GM 4.3L 262 CID V6 | Price: $27.95
Weight: 0.64 |  Rod Bearing Set for GM 4.3L V6, 262 CID
Hydraulic Lifter Cam, Chain Drive, LH/RH Rotation |
|
| FED1463M | Cam Bearing Set for GM 4.3L 262 CID V6 | Price: $37.95
Weight: 0.40 |  Cam Bearing Set for GM 262 cid 4.3L V6
Hydraulic Lifter Cam, Chain Drive, LH/RH Rotation |
|
FED5085M
Click To Select Size | Main Bearing Set for GM 4.3L 262 CID V6 | Price: $64.95
Weight: 1.16 |  Main Bearing Set for GM 262 cid 4.3L V6, sold in sets per engine
Hydraulic Lifter Cam, Chain Drive, LH/RH Rotation |
|
Freeze Plugs |
| FED381-8059 | Freeze Plug Set for GM V6 and Small Block V8 Marine Engines | Price: $18.95
Weight: 0.76 |  Expansion Plug Engine set for a GM V6 and small block V8. These expansion plugs (freeze plugs) are made of Brass for Marine use.
Hydraulic Lifter Cam, Chain Drive, LH/RH Rotation |
|
Gaskets and Seals |
| VIC47948 | Seal Timing Cover GM Inline 4 and 6 Cylinder V6 and SB V8 RH Rotation | Price: $19.95
Weight: 0.09 |  Seal fits the following:
Front Main Seal Reverse Rotation Fits GM Inline 4 and 6 Cylinder, V6 and Small Block V8 RH rotation. RH Rotation is only used in Inboard applications and the engine turns opposite automotive rotation.
Timing Cover Seal for: Chris Craft; Mercruiser; OMC: with 283, 302, 307, 327, 350 GM Small Block V8 Reverse Rotation
Hydraulic Lifter Cam, Chain Drive, LH/RH Rotation |
|
| VIC5775 | Gasket Cylinder Head Marine 262 4.3L V6 1987-Newer Mercruiser OMC Volvo | Price: $48.95
Weight: 0.50
Quantity in Package: 1 each |  Cylinder Head Gasket Marine that Fits A GM 4.3L (262 cid) From 1987 and Newer. Fits all Brands of Marine engines: Mercruiser OMC Volvo Yamaha, etc. (GLM36100, DET59062HG)
Hydraulic Lifter Cam, Chain Drive, LH/RH Rotation |
|
| VICHS3764M | Gasket Head Set Marine 4.3L 262 CID GM V6 for 12 Bolt Intake | Price: $219.95
Weight: 1.73 |  Cylinder Head Gasket Set Fits GM 4.3L 262 CID V6 for 12 bolt intake manifold and center bolt valve covers as used by Chris Craft, Hardin Marine, Mercruiser, OMC and Crusader
(as pictured)
Includes: 2 different Carburetor Gaskets2 Cylinder Head Gaskets1 Distributor Mounting Gasket2 Exhaust Elbow Gaskets2 Exhaust Manifold Gaskets1 Fuel Pump Gasket2 Intake Manifold Gaskets4 different Thermostat Housing Gaskets2 Valve Cover Gaskets18 Valve Stem Seals2 Water Pump Gaskets
Hydraulic Lifter Cam, Chain Drive, LH/RH Rotation |
|
| VICJV624 | Seal Rear Main 2 Piece for GM Inline 4 6 Cylinder V6 SB V8 RH Rotation | Price: $89.95
Weight: 0.12
Quantity in Package: |  2-Piece Rear Main Seal for the following GM RIGHT Hand Opposite rotation marine engines:
153, 181, 230, 250, 292 cid inline engines, 262 cid V6, and 283, 302, 305, 307, 327, 350 cid Small Block V8
For Chris Craft, Flagship, Hardin Marine, Indmar, Marine Power, Mercruiser, OMC, PCM, Stokes Marine, Crusader, Volvo and Yamaha reverse rotation applications with the above listed 2-piece rear main seals
Hydraulic Lifter Cam, Chain Drive, LH/RH Rotation |
|
| VICVS50160 | Gasket Valve Cover for GM 4.3L 262 cid V6 | Price: $12.95
Weight: 0.90
Quantity in Package: 1 each | 
Valve Cover gasket for 4.3L 262 Cubic Inch GM engines.
Fits models with Steel Center Bolt Valve Covers.
Replaces Mercruiser Quicksilver # 27-11988; Volvo Penta # 3854300; Felpro # 17920; GLM # 30359; Mallory # 9-61316; Sierra # 18-0311
Hydraulic Lifter Cam, Chain Drive, LH/RH Rotation |
|
Oil Pumps |
| MEL55-S1 | Oil Pump Screen Standard | Price: $10.95
Weight: 0.51 |  Oil Pump Screen, 5/8" Fits Mercruiser 229/3.8L V6, 305/350 5.0/5.7L V8, OMC 283/4.6L V6,
Hydraulic Lifter Cam, Chain Drive, LH/RH Rotation |
|
| MELIS55E | Shaft, Oil Pump, GM Small Block with Steel Sleeve | Price: $11.95
Weight: 0.29 |  Oil Pump Shaft for GM Small Block V8 with Steel Sleeve
Hydraulic Lifter Cam, Chain Drive, LH/RH Rotation |
|
| MELM-55 | Oil Pump Small Block GM V8 & V6 | Price: $52.95
Weight: 3.40 |  Oil Pump for GM 262 cid V6, Except SN: OF601127 & up; GM small block V8
THIS OIL PUMP HAS A 5/8" OIL INLET
Hydraulic Lifter Cam, Chain Drive, LH/RH Rotation |
|
| MELM-55HV | Oil Pump Small Block GM V8 & V6 High Volume. | Price: $69.95
Weight: 4.05 |  High Volume Oil Pump for GM 262 cid V6, Except SN: OF601127 & up; GM small block V8
THIS OIL PUMP HAS A 5/8" OIL INLET
Hydraulic Lifter Cam, Chain Drive, LH/RH Rotation |
|
| MELM155 | Oil Pump GM V6, V8 Late Model | Price: $44.95
Weight: 3.75 |  Oil Pump for GM 262 cid V6 LX Gen. II SN: OF601127 & up
and V8
THIS OIL PUMP HAS A 3/4" OIL INLET
Hydraulic Lifter Cam, Chain Drive, LH/RH Rotation |
|
Pistons |
Rings |
HAS5712
Click To Select Size | Piston Ring Set, GM 4.3L V6 | Price: $47.95
Weight: 0.90 |  Piston Ring Set for GM 262 cid 4.3L V6, Non Vortec.
BORE: 4.0"
COMPRESSION GROOVE(S): 2.0/2.0 mm
OIL GROOVE: 4.75 mm
Please verify your Ring thickness before ordering.
Ring Sets are Non-Returnable.
This set includes Piston Rings for all of the Pistons in your engine (1 set per engine)
Hydraulic Lifter Cam, Chain Drive, LH/RH Rotation |
|
Valve Train |
| FEDCS-1050M | Camshaft Marine for GM V6 262 4.3L Right Hand Rotation Flat Tappets | Price: $199.95
Weight: 7.06
Quantity in Package: |  Camshaft fits Right Hand GM V6 with Flat Tappets. Fits Inboard applications only... All I/O engines are LH rotation.
This camshaft can be easily identified by being driven by 2 gears without a chain and the lifters do not have rollers on the end of them.
Determine your Engine rotation.
Hydraulic Lifter Cam, Chain Drive, LH/RH Rotation |
|
| MEL22121 | Camshaft Marine GM 4.3L 262 Hydraulic Flat Tappet Left Hand 175-180 HP | Price: $128.95
Weight: 6.86 |  Marine Hydraulic Flat Tappet Camshaft for GM 4.3L 262 V6.
Replaces Mercruiser #: 431-9691
Left Hand Engine Rotation. ALL I/O ENGINES ARE LH ROTATION!
Determine your Engine rotation.
Hydraulic Lifter Cam, Chain Drive, LH/RH Rotation |
|
| MEL22123 | Camshaft Marine for GM 4.3L 262 Hydraulic Flat Tappet LH 205HP | Price: $169.95
Weight: 8.00
Quantity in Package: | Marine Hydraulic Flat Tappet Cam for GM 4.3L 262 cid V6 for engines without a balance shaft used by Mercruiser OMC Volvo Crusader and Marine Power. A Balance shaft is a shaft above the camshaft which has weights to make the engine run with less vibration. Chain drive Left Hand standard rotation. ALL I/O ENGINES ARE LH ROTATION! Determine your Engine rotation.
Hydraulic Lifter Cam, Chain Drive, LH/RH Rotation |
|
| MEL2534 | Timing Gear Camshaft for GM Small Block V8 and V6 Right Hand Rotation | Price: $99.95
Weight: 2.81 |  Timing Gear for GM 350 cid 5.7L V8 and 262 cid 4.3L V6 with cam gear Right Hand
Used with:
Hydraulic Lifter Cam, Chain Drive, LH/RH Rotation |
|
| MEL2535 | Gear Timing Crank for GM Small Block V8 and V6 Right Hand Rotation | Price: $96.95
Weight: 1.22 |  Timing Crank Gear for GM 350 cid 5.7L V8 and 262 cid 4.3L V6 with cam gear Right Hand
Used with:
Hydraulic Lifter Cam, Chain Drive, LH/RH Rotation |
|
| MEL40400 | Timing Set for GM Small Block V8 and V6 using a Flat Tappet Camshaft | Price: $50.95
Weight: 3.15 |  Timing Set for the GM 262 C.I.D. (4.3L) V-6 and the (GM) small block V-8 flat tappet engines. This kit contains a Double Roller Chain, Crankshaft Gear, and a Camshaft Gear. If a gasket set is needed, the V-6 is GLM39730, and the V-8 is GLM39720. All use an AP1055 for a front crank seal.
Hydraulic Lifter Cam, Chain Drive, LH/RH Rotation |
|
| MEL47507 | Valve Spring Retainer Chrome Moly | Price: $4.95
Weight: 0.32 |  Chrome Moly Valve Spring Retainer for use with 11/32 Inch Valve Stems
Use with 46611 and 46627 Springs.
Heat treated to 40 Rockwell© scale and are manufactured for 7° valve locks
Outside/Steps Diameters: 1.375 / 1.085 / .805 Inch
Relative Height: .125 Inch
Hydraulic Lifter Cam, Chain Drive, LH/RH Rotation |
|
| MEL47610 | Valve Lock Hardened for GM and Ford .34375 Inch Stem | Price: $2.95
Weight: 0.03
Quantity in Package: 2 per package |  11/32 Inch stem Valve Lock for GM and Ford applications
Sold in pairs, 1 pair required per each valve
| Make | Engine | | FORD MARINE | 8Cyl 4.7L 289CID | | FORD MARINE | 8Cyl 5.0L 302CID | | FORD MARINE | 8Cyl 5.8L 351CID | | FORD MARINE | 8Cyl 7.0L 429CID | | FORD MARINE | 8Cyl 7.5L 460CID | | MERCURY MARINE | 4Cyl 2.5L 153CID | | MERCURY MARINE | 4Cyl 3.0L 181CID | | MERCURY MARINE | 4Cyl 3.7L 224CID | | MERCURY MARINE | 6Cyl 3.8L 229CID | | MERCURY MARINE | 6Cyl 4.1L 250CID | | MERCURY MARINE | 6Cyl 4.3L 262CID | | MERCURY MARINE | 8Cyl 4.6L 283CID | | MERCURY MARINE | 8Cyl 5.0L 302CID | | MERCURY MARINE | 8Cyl 5.0L 305CID | | MERCURY MARINE | 8Cyl 5.4L 327CID | | MERCURY MARINE | 8Cyl 5.7L 350CID | | MERCURY MARINE | 8Cyl 5.8L 351CID | | OMC | 4Cyl 2.5L 153CID | | OMC | 4Cyl 3.0L 181CID | | OMC | 6Cyl 4.1L 250CID | | OMC | 8Cyl 4.6L 283CID | | OMC | 8Cyl 5.0L 302CID | | OMC | 8Cyl 5.0L 307CID | | OMC | 8Cyl 5.7L 350CID | | OMC | 8Cyl 5.8L 351CID |
Hydraulic Lifter Cam, Chain Drive, LH/RH Rotation |
|
| MEL50031 | Push Rod for GM V6 and Small Block V8 using Hydraulic Cam | Price: $15.95
Weight: 0.54 |  Push Rod for GM V6 and Small Block V8 with Hydraulic Cams
Hydraulic Lifter Cam, Chain Drive, LH/RH Rotation |
|
| MELJB-817 | Lifter Hydraulic Flat Tappet for GM 4 6 8 Cylinder | Price: $9.95
Weight: 0.91 |  Hydraulic Lifter for GM inline 4 & 6 cyl., small block V8s and GM 454 CID Gen. 4 (with adjustable rocker arms) with hydraulic lifter cams.
Replaces Mercruiser Number: 72638
Hydraulic Lifter Cam, Chain Drive, LH/RH Rotation |
|
| MELJB-817-12 | Lifter Kit Hydraulic Flat Tappet for GM V6 & Inline 6 Cyl Set of 12 JB-817 | Price: $89.95
Weight: 10.92
Quantity in Package: |  Set of 12 Hydraulic Lifters
for GM inline 6 cylinder and V6 with hydraulic lifter cams.
Replaces 12 of Mercruiser #: 72638
Hydraulic Lifter Cam, Chain Drive, LH/RH Rotation |
|
| MELMRK401 | Rocker Arm for GM V6-V8 Small Block | Price: $5.95
Weight: 0.27 |  Rocker Arm, for GM V6 and Small Block V8
Hydraulic Lifter Cam, Chain Drive, LH/RH Rotation |
|
| MELV1194 | Valve, Intake GM SB V8 1.72 | Price: $12.95
Weight: 0.54 |  Intake Valve for GM Small Block V8 1.72
Hydraulic Lifter Cam, Chain Drive, LH/RH Rotation |
|
| MELV1195 | Valve, Intake, GM Small Block,1.94 Inch | Price: $8.95
Weight: 0.55 |  Intake Valve, GM Small Block V8, 1.94" diameter
Hydraulic Lifter Cam, Chain Drive, LH/RH Rotation |
|
| MELV1195 | Valve, Intake, GM Small Block,1.94 Inch | Price: $8.95
Weight: 0.55 | Intake Valve, GM Small Block V8, 1.94" diameter
Hydraulic Lifter Cam, Chain Drive, LH/RH Rotation |
|
| MELV1206 | Valve, Exhaust GM SB V8 1.50 | Price: $21.95
Weight: 0.54 | Exhaust Valve for GM Small Block V8 - 1.50"
Hydraulic Lifter Cam, Chain Drive, LH/RH Rotation |
|
