New Items

Last 25 Parts Added to eBasicpower.com
|Last 50 | Last 75 | Last 100|
Latest Additions in These Categories
Seals (Front and Rear)  
Seals, Engine for Mercruiser  
Seals, Engine for Mercruiser Inboards  
Seals, Engine, for Crusader  
Retro-fit Exhaust Fittings  
 
Rear Main Seal Set, 1-Piece, GM 3.0L-5.7L Left-HandRear Main Seal Set, 1-Piece, GM 3.0L-5.7L Left-Hand
VICJV554   $17.95

1-Piece Rear Main Seal set for Left-Hand GM 3.0L-5.7L with 1-piece rear main seal
Fits GM 181 CID 3.0L (Serial # 6229718 and up); GM 262 CID 4.3L V6, GM 305 CID 5.0L V8, and GM 350 CID 5.7L V8 with 1-piece rear main seals
Used in Chris Craft, Flagship Marine, Hardin Marine, Indmar, Marine Power, Mercruiser, OMC, Pleasurecraft, Crusader, Volvo, and Yamaha applications
 
Flapper Insert, Stainless Steel, 5 inchFlapper Insert, Stainless Steel, 5 inch
SSI03-5030002   $79.95

Retro-fit Stainless Steel Flapper Insert
5" Diameter X 3-1/4" Length
 
Flapper Insert, Stainless Steel, 4 inchFlapper Insert, Stainless Steel, 4 inch
SSI03-4030002   $44.95

Retro-fit Stainless Steel Flapper Insert
4" Diameter X 3" Length
 
Renew Kit, Holley Marine Carburetor 4150 Dual FD 5.7L-7.4LRenew Kit, Holley Marine Carburetor 4150 Dual FD 5.7L-7.4L
EDM611015   $74.95

Carburetor Renew Kit original equipment marine rebuild kit for Holley marine carburetors on 5.7L and 7.4L Marine Engines. Kit contains all parts and gaskets that are necessary to restore "like new" performance to your marine carburetor. Detailed instructions are included to guide you through the rebuilding process. Start off the season with a quality OEM Renew Kit. It's your guarantee for trouble-free cruising.

Installation Notes:
Kit is for list numbers R50419, R50419-1, R50419-2, R50463, R50463-1, R80265, R80315, R80315-1, R80403, R80403-1, R80473, R80473-1 and R80492

Features:
  • Contains all parts and gaskets necessary to restore your marine carburetor to like new performance
  • Detailed instructions included
  •  
    Gasket Set, Intake Manifold, 4.3L 262 GM V6 non-VortecGasket Set, Intake Manifold, 4.3L 262 GM V6 non-Vortec
    VICMS15352   $11.95

    Intake Manifold Gasket Set fits GM 4.3L 262 CID V6 non-Vortec engines with 12-bolt intake.
    Fits Chris Craft, Hardin Marine, Mercruiser, OMC, Crusader, and Yamaha. (as pictured)
     
    Gasket, Thermostat Housing Top CoverGasket, Thermostat Housing Top Cover
    OSC41812   $4.95

    Gasket, top cover to base for center riser style manifolds.
    Replaces Mercruiser # 27-41812; Barr # MC47-27-41812; Sierra # 18-2554; SMI #27812.
    Use with OSCMC552-SB or OSCMC552-BB thermostat bases.
     
    Engine Mount, Front, Indmar, PCMEngine Mount, Front, Indmar, PCM
    EDM535000   $69.95

    Front Engine Mount used on Ford or GM
    Fits Indmar and some Pleasurecraft applications
     
    Trunion, Front Engine Mount, GM 4.3L V6, 5.7L SB V8Trunion, Front Engine Mount, GM 4.3L V6, 5.7L SB V8
    EDM535021   $39.95

    Trunion fits Front Engine Mounts on 4.3L 262 CID GM V6 and 5.7L 350 CID GM Small Block V8
     
    Water Pump Kit, 4-8 HP 2-Stroke, Johnson, Evinrude 80-upWater Pump Kit, 4-8 HP 2-Stroke, Johnson, Evinrude 80-up
    GLM12065   $40.95

    Water Pump Kit with Housing
    Fits 1980 and Newer Johnson Evinrude 4, 4.5, 5, 6, 7.5 and 8 HP 2-Stroke Outboards
     
    Head Set, 4.3L 262 CID GM V6Head Set, 4.3L 262 CID GM V6
    VICHS3764M   $149.00

    Cylinder Head Gasket Set Fits GM 4.3L 262 CID V6 Chris Craft, Hardin Marine, Mercruiser, OMC and Crusader
    (Requires Oil Pan Set, Timing Cover Set And Rear Main Seal To Make Full Set, Requires Thermostat Housing Set And Exhaust Manifold Cooling Set)
    Includes:
  • 2 different Carburetor Gaskets
  • 2 Cylinder Head Gaskets
  • 1 Distributor Mounting Gasket
  • 1 Exhaust Elbow Gasket
  • 1 Exhaust Manifold Gasket
  • 1 Fuel Pump Gasket
  • 1 Intake Manifold Gasket
  • 4 different Thermostat Housing Gaskets
  • 2 Valve Cover Gaskets
  • 18 Valve Stem Seals
  • 2 Water Pump Gaskets
  •  
    Head Set, 4.5L 273, 5.2L 318, 5.6L 340, 5.9L 360 Chrysler SB V8Head Set, 4.5L 273, 5.2L 318, 5.6L 340, 5.9L 360 Chrysler SB V8
    VICHS3536VM   $139.95

    Cylinder Head Gasket Set Fits Chrysler Small Block V8 (273, 318, 340, 360 CID)
    (Intake Manifold Set For 4 Barrel Carburetor Not Included,
    Requires Thermostat Housing Set And Exhaust Manifold Cooling Set)
    Includes:
  • 2 Cylinder Head Gaskets
  • 1 Distributor Mounting Gasket
  • 1 Distributor O-Ring
  • 1 Exhaust Manifold Gasket
  • 1 Intake Manifold Gasket
  • 2 Valve Cover Gaskets
  • 16 Valve Stem Seals
  • 1 Victopac Sheet
  • 1 Water Outlet Gasket
  •  
    Assembly Set, 3.0L 181 CID GM 4 Cyl, 1-piece Rear Main SealAssembly Set, 3.0L 181 CID GM 4 Cyl, 1-piece Rear Main Seal
    VICCS5719   $53.95

    Lower Assembly Set. Fits GM 3.0L 181 CID with a 1-piece Rear Main Seal Serial Number 6229718 and up
    Fits: Chris Craft, Hardin Marine, Marine Power, Mercruiser, OMC, Volvo Penta
    (Requires Head Set, Thermostat Housing Set And Exhaust Manifold Cooling Set To Make Full Set, Reverse Rotation Timing Cover And Rear Main Seals Not Included)
    Includes:
  • 3 different Crankshaft Seals
  • 1 Flywheel Housing Gasket
  • 1 Oil Pan Gasket
  • 1 Oil Pan Drain Plug Gasket/Seal
  • 1 Oil Pump Shaft Gasket
  • 1 Timing Cover Gasket
  • 1 Timing Cover Seal

  • NOTE: Assembly Set + Head Set = Overhaul Set
     
    Gasket, Cylinder Head, GM SB V8 (except 5.0L 305)Gasket, Cylinder Head, GM SB V8 (except 5.0L 305)
    VIC1178VM   $29.95

    Cylinder Head Gasket, VR2000 Stainless Steel Fits GM 4.6L 283 CID, 5.0L 302 CID, 5.0L 307 CID, 5.4L 327CID, and 5.7L 350 CID Small Block V8
    (Does Not fit GM 5.0L 305 CID Small Block V8)
    Used on Chris Craft, Flagship Marine, Indmar, Marine Power, Mercruiser, OMC, Pleasurecraft, Crusader, Volvo Penta, Yamaha.
     
    17 in X 18 in, 1-Pocket Lure Bag17 in X 18 in, 1-Pocket Lure Bag
    CTBG-1-1718   $7.95

    Lure Bag, Blue Net with Clear Plastic Front
    17 in X 18 in (44 cm X 26.5 cm)
    1 pocket velcro closure on top
    nylon web strap carrying handles
     
    14.5 in X 28.5 in, 4-Pocket Lure Bag14.5 in X 28.5 in, 4-Pocket Lure Bag
    CTBG-4-1516   $6.95

    Lure Bag, Blue Net with Clear Plastic Front
    14.5 in X 28.5 in (37 cm X 72.5 cm)
    4 pockets with velcro closure on each compartment
    nylon web single strap carrying handle
     
    14 in X 14.5 in, 1-Pocket Lure Bag14 in X 14.5 in, 1-Pocket Lure Bag
    CTBG-1-1415   $6.95

    Lure Bag, Blue Net with Clear Plastic Front
    14 in X 14.5 in (35 cm X 37 cm)
    1 pocket lure bag with velcro closure
    nylon web strap carrying handle and grommeted tie straps
     
    10.5 in X 13 in, 5-Pocket Lure Bag10.5 in X 13 in, 5-Pocket Lure Bag
    CTBG-5-1113   $4.95

    Lure Bag, Blue Net with Clear Plastic Front
    10.5 in X 13 in (27 cm X 33 cm)
    5 pockets with plastic snap per compartment
    nylon web strap carrying handle
     
    10 in X 11 in, 1-Pocket Lure Bag10 in X 11 in, 1-Pocket Lure Bag
    CTBG-1-1011   $2.95

    Lure Bag, Blue Net with Clear Plastic Front
    10 in X 11 in (26.5 cm X 28 cm)
    1 pocket velcro closure on top with nylon web strap carrying handle
     
    Jigging Lure, Vertical, Octopus, 2.8 oz. (080g)Jigging Lure, Vertical, Octopus, 2.8 oz. (080g)
    JT006-080-5G11   $4.99

    Jigging Lure, Vertical, Octopus, 2.8 oz. (080g) 6.5 inch / 16.51cm
    With Stinger Hooks
    Tails Glow in the Dark
    Our jigging lures are made with the finest painting technology available and include 5 coats of very heavy duty epoxy paint with a clear coating for extra protection to insure a long life.
     
    Jigging Lure, Vertical, Octopus, 2.8 oz. (080g)Jigging Lure, Vertical, Octopus, 2.8 oz. (080g)
    JT006-080-5232   $4.99

    Jigging Lure, Vertical, Octopus, 2.8 oz. (080g) 6.5 inch / 16.51cm
    With Stinger Hooks
    Tails Glow in the Dark
    Our jigging lures are made with the finest painting technology available and include 5 coats of very heavy duty epoxy paint with a clear coating for extra protection to insure a long life.
     
    Jigging Lure, Vertical, Octopus, 2.8 oz. (080g)Jigging Lure, Vertical, Octopus, 2.8 oz. (080g)
    JT006-080-517   $4.99

    Jigging Lure, Vertical, Octopus, 2.8 oz. (080g) 6.5 inch / 16.51cm
    With Stinger Hooks
    Tails Glow in the Dark
    Our jigging lures are made with the finest painting technology available and include 5 coats of very heavy duty epoxy paint with a clear coating for extra protection to insure a long life.
     
    Jigging Lure, Vertical, Octopus, 2.8 oz. (080g)Jigging Lure, Vertical, Octopus, 2.8 oz. (080g)
    JT006-080-511   $4.99

    Jigging Lure, Vertical, Octopus, 2.8 oz. (080g) 6.5 inch / 16.51cm
    With Stinger Hooks
    Tails Glow in the Dark
    Our jigging lures are made with the finest painting technology available and include 5 coats of very heavy duty epoxy paint with a clear coating for extra protection to insure a long life.
     
    Jigging Lure, Vertical, Octopus, 2.8 oz. (080g)Jigging Lure, Vertical, Octopus, 2.8 oz. (080g)
    JT006-080-4932   $4.99

    Jigging Lure, Vertical, Octopus, 2.8 oz. (080g) 6.5 inch / 16.51cm
    With Stinger Hooks
    Tails Glow in the Dark
    Our jigging lures are made with the finest painting technology available and include 5 coats of very heavy duty epoxy paint with a clear coating for extra protection to insure a long life.
     
    Jigging Lure, Vertical, Octopus, 2.8 oz. (080g)Jigging Lure, Vertical, Octopus, 2.8 oz. (080g)
    JT006-080-4228   $4.99

    Jigging Lure, Vertical, Octopus, 2.8 oz. (080g) 6.5 inch / 16.51cm
    With Stinger Hooks
    Tails Glow in the Dark
    Our jigging lures are made with the finest painting technology available and include 5 coats of very heavy duty epoxy paint with a clear coating for extra protection to insure a long life.
     
    eBasicPower Site is
    © 1999-2007 Basic Power Industries