GM 4.3L V6 262 CID Flat Tappet (1 Piece Rear Seal)

Bearings

ACL6B1358
Click To Select Size		Rod Bearing for GM 4.3L 262 CID V6
Price: $27.95
Weight: 0.64		Rod Bearing Set for GM 4.3L V6, 262 CID
Flat Tappet (LH/RH), Hydraulic (LH) Lifter Cam, Chain Drive
FED1463MCam Bearing Set for GM 4.3L 262 CID V6
Price: $37.95
Weight: 0.40
Cam Bearing Set for GM 262 cid 4.3L V6
Flat Tappet (LH/RH), Hydraulic (LH) Lifter Cam, Chain Drive
FED5085M
Click To Select Size		Main Bearing Set for GM 4.3L 262 CID V6
Price: $64.95
Weight: 1.16		Main Bearing Set for GM 262 cid 4.3L V6, sold in sets per engine
Flat Tappet (LH/RH), Hydraulic (LH) Lifter Cam, Chain Drive

Freeze Plugs

FED381-8006Freeze Plug Set for GM Inline 4 and 6 Cylinder Engines
Price: $18.95
Weight: 0.42
Brass Freeze Plug Set fits all Inline 4 and 6 cylinder GM engines. These Expansion Plugs (Freeze Plugs) are Made of Brass For Marine Use.
Flat Tappet (LH/RH), Hydraulic (LH) Lifter Cam, Chain Drive

Gaskets and Seals

OSCCS-GHGasket, Manifold, for GM 262 4.3L V6
Price: $8.00
Weight: 0.50
Quantity in Package: 1 each
Manifold Gasket fits Osco # 9745 manifolds
Replaces: Mercury Quicksilver # 27-99757; Barr # MC47-27-97757; GLM # 32170; Sierra # 18-2909; Mallory # 61425
Flat Tappet (LH/RH), Hydraulic (LH) Lifter Cam, Chain Drive
VIC47948Seal Timing Cover GM Inline 4 and 6 Cylinder V6 and SB V8 RH Rotation
Price: $19.95
Weight: 0.09
Seal fits the following:
Front Main Seal Reverse Rotation Fits GM Inline 4 and 6 Cylinder, V6 and Small Block V8 RH rotation. RH Rotation is only used in Inboard applications and the engine turns opposite automotive rotation.
Timing Cover Seal for: Chris Craft; Mercruiser; OMC: with 283, 302, 307, 327, 350 GM Small Block V8 Reverse Rotation
Flat Tappet (LH/RH), Hydraulic (LH) Lifter Cam, Chain Drive
VIC5775Gasket Cylinder Head Marine 262 4.3L V6 1987-Newer Mercruiser OMC Volvo
Price: $48.95
Weight: 0.50
Quantity in Package: 1 each
Cylinder Head Gasket Marine that Fits A GM 4.3L (262 cid) From 1987 and Newer. Fits all Brands of Marine engines: Mercruiser OMC Volvo Yamaha, etc. (GLM36100, DET59062HG)
Flat Tappet (LH/RH), Hydraulic (LH) Lifter Cam, Chain Drive
VICHS3764MGasket Head Set Marine 4.3L 262 CID GM V6 for 12 Bolt Intake
Price: $219.95
Weight: 1.73
Cylinder Head Gasket Set Fits GM 4.3L 262 CID V6 for 12 bolt intake manifold and center bolt valve covers as used by Chris Craft, Hardin Marine, Mercruiser, OMC and Crusader
(as pictured)
Includes:
  • 2 different Carburetor Gaskets
  • 2 Cylinder Head Gaskets
  • 1 Distributor Mounting Gasket
  • 2 Exhaust Elbow Gaskets
  • 2 Exhaust Manifold Gaskets
  • 1 Fuel Pump Gasket
  • 2 Intake Manifold Gaskets
  • 4 different Thermostat Housing Gaskets
  • 2 Valve Cover Gaskets
    • 18 Valve Stem Seals
  • 2 Water Pump Gaskets

    • Flat Tappet (LH/RH), Hydraulic (LH) Lifter Cam, Chain Drive
    VICJV564Seal Rear Main for GM V6 and SB V8 1 Piece Reverse Rotation
    Price: $99.95
    Weight: 0.10
    Quantity in Package:
    		1 Piece Rear Main Seal for GM 4.3L 262 cid V6 and 5.0L /5.7L 305/350 cid Small Block V8, Used in Inboard Engines with Reverse Rotation.
    Fits Chris Craft, Flagship, Hardin Marine, Indmar, Marine Power, Mercruiser, OMC, PCM, Crusader, Volvo and Yamaha 1-Piece rear main seal, reverse rotation applications.
    Flat Tappet (LH/RH), Hydraulic (LH) Lifter Cam, Chain Drive
    VICMS15352Gasket Set Intake Manifold for GM 4.3L 262 CID V6 with 12 Bolt Intake
    Price: $14.95
    Weight: 0.17
    		Intake Manifold Gasket Set fits GM 4.3L 262 CID V6 non-Vortec engines with 12-bolt intake.
    Fits Chris Craft, Hardin Marine, Mercruiser, OMC, Crusader, and Yamaha. (as pictured)
    Flat Tappet (LH/RH), Hydraulic (LH) Lifter Cam, Chain Drive
    VICVS50160Gasket Valve Cover for GM 4.3L 262 cid V6
    Price: $12.95
    Weight: 0.90
    Quantity in Package: 1 each

    Valve Cover gasket for 4.3L 262 Cubic Inch GM engines. 
    Fits models with Steel Center Bolt Valve Covers.
    Replaces Mercruiser Quicksilver # 27-11988; Volvo Penta # 3854300; Felpro # 17920; GLM # 30359; Mallory # 9-61316; Sierra # 18-0311


    Flat Tappet (LH/RH), Hydraulic (LH) Lifter Cam, Chain Drive

    Oil Pumps

    MELIS55EShaft, Oil Pump, GM Small Block with Steel Sleeve
    Price: $11.95
    Weight: 0.29
    		Oil Pump Shaft for GM Small Block V8 with Steel Sleeve
    Flat Tappet (LH/RH), Hydraulic (LH) Lifter Cam, Chain Drive
    MELM-55Oil Pump Small Block GM V8 & V6
    Price: $52.95
    Weight: 3.40
    		Oil Pump for GM 262 cid V6, Except SN: OF601127 & up; GM small block V8
    THIS OIL PUMP HAS A 5/8" OIL INLET
    Flat Tappet (LH/RH), Hydraulic (LH) Lifter Cam, Chain Drive
    MELM-55HVOil Pump Small Block GM V8 & V6 High Volume.
    Price: $69.95
    Weight: 4.05
    		High Volume Oil Pump for GM 262 cid V6, Except SN: OF601127 & up; GM small block V8
    THIS OIL PUMP HAS A 5/8" OIL INLET
    Flat Tappet (LH/RH), Hydraulic (LH) Lifter Cam, Chain Drive

    Pistons

    Rings

    HAS5712
    Click To Select Size    		Piston Ring Set, GM 4.3L V6
    Price: $47.95
    Weight: 0.90    		Piston Ring Set for GM 262 cid 4.3L V6, Non Vortec.
    BORE: 4.0"
    COMPRESSION GROOVE(S): 2.0/2.0 mm
    OIL GROOVE: 4.75 mm
    Please verify your Ring thickness before ordering.
    Ring Sets are Non-Returnable.
    This set includes Piston Rings for all of the Pistons in your engine (1 set per engine)
    Flat Tappet (LH/RH), Hydraulic (LH) Lifter Cam, Chain Drive

    Valve Train

    FEDCS-1050MCamshaft Marine for GM V6 262 4.3L Right Hand Rotation Flat Tappets
    Price: $199.95
    Weight: 7.06
    Quantity in Package:
    		Camshaft fits Right Hand GM V6 with Flat Tappets. Fits Inboard applications only... All I/O engines are LH rotation.
    This camshaft can be easily identified by being driven by 2 gears without a chain and the lifters do not have rollers on the end of them.
    Determine your Engine rotation.
    Flat Tappet (LH/RH), Hydraulic (LH) Lifter Cam, Chain Drive
    MEL22121Camshaft Marine GM 4.3L 262 Hydraulic Flat Tappet Left Hand 175-180 HP
    Price: $128.95
    Weight: 6.86
    		Marine Hydraulic Flat Tappet Camshaft for GM 4.3L 262 V6.

    Replaces Mercruiser #: 431-9691

    Left Hand Engine Rotation. ALL I/O ENGINES ARE LH ROTATION!
    Determine your Engine rotation.
    Flat Tappet (LH/RH), Hydraulic (LH) Lifter Cam, Chain Drive
    MEL22123Camshaft Marine for GM 4.3L 262 Hydraulic Flat Tappet LH 205HP
    Price: $169.95
    Weight: 8.00
    Quantity in Package:
    		Marine Hydraulic Flat Tappet Cam for GM 4.3L 262 cid V6 for engines without a balance shaft used by Mercruiser OMC Volvo Crusader and Marine Power. A Balance shaft is a shaft above the camshaft which has weights to make the engine run with less vibration. Chain drive Left Hand standard rotation. ALL I/O ENGINES ARE LH ROTATION! Determine your Engine rotation.
    Flat Tappet (LH/RH), Hydraulic (LH) Lifter Cam, Chain Drive
    MEL40400Timing Set for GM Small Block V8 and V6 using a Flat Tappet Camshaft
    Price: $50.95
    Weight: 3.15
    		Timing Set for the GM 262 C.I.D. (4.3L) V-6 and the (GM) small block V-8 flat tappet engines. This kit contains a Double Roller Chain, Crankshaft Gear, and a Camshaft Gear. If a gasket set is needed, the V-6 is GLM39730, and the V-8 is GLM39720. All use an AP1055 for a front crank seal.
    Flat Tappet (LH/RH), Hydraulic (LH) Lifter Cam, Chain Drive
    MEL47507Valve Spring Retainer Chrome Moly
    Price: $4.95
    Weight: 0.32
    		Chrome Moly Valve Spring Retainer for use with 11/32 Inch Valve Stems
    Use with 46611 and 46627 Springs.
    Heat treated to 40 Rockwell© scale and are manufactured for 7° valve locks
    Outside/Steps Diameters: 1.375 / 1.085 / .805 Inch
    Relative Height: .125 Inch
    Flat Tappet (LH/RH), Hydraulic (LH) Lifter Cam, Chain Drive
    MEL47610Valve Lock Hardened for GM and Ford .34375 Inch Stem
    Price: $2.95
    Weight: 0.03
    Quantity in Package: 2 per package
    		11/32 Inch stem Valve Lock for GM and Ford applications
    Sold in pairs, 1 pair required per each valve
    Make Engine
    FORD MARINE 8Cyl 4.7L 289CID
    FORD MARINE 8Cyl 5.0L 302CID
    FORD MARINE 8Cyl 5.8L 351CID
    FORD MARINE 8Cyl 7.0L 429CID
    FORD MARINE 8Cyl 7.5L 460CID
    MERCURY MARINE 4Cyl 2.5L 153CID
    MERCURY MARINE 4Cyl 3.0L 181CID
    MERCURY MARINE 4Cyl 3.7L 224CID
    MERCURY MARINE 6Cyl 3.8L 229CID
    MERCURY MARINE 6Cyl 4.1L 250CID
    MERCURY MARINE 6Cyl 4.3L 262CID
    MERCURY MARINE 8Cyl 4.6L 283CID
    MERCURY MARINE 8Cyl 5.0L 302CID
    MERCURY MARINE 8Cyl 5.0L 305CID
    MERCURY MARINE 8Cyl 5.4L 327CID
    MERCURY MARINE 8Cyl 5.7L 350CID
    MERCURY MARINE 8Cyl 5.8L 351CID
    OMC 4Cyl 2.5L 153CID
    OMC 4Cyl 3.0L 181CID
    OMC 6Cyl 4.1L 250CID
    OMC 8Cyl 4.6L 283CID
    OMC 8Cyl 5.0L 302CID
    OMC 8Cyl 5.0L 307CID
    OMC 8Cyl 5.7L 350CID
    OMC 8Cyl 5.8L 351CID

    Flat Tappet (LH/RH), Hydraulic (LH) Lifter Cam, Chain Drive
    MELJB-817Lifter Hydraulic Flat Tappet for GM 4 6 8 Cylinder
    Price: $9.95
    Weight: 0.91
    		Hydraulic Lifter for GM inline 4 & 6 cyl., small block V8s and GM 454 CID Gen. 4 (with adjustable rocker arms) with hydraulic lifter cams.
    Replaces Mercruiser Number: 72638
    Flat Tappet (LH/RH), Hydraulic (LH) Lifter Cam, Chain Drive
    MELJB-817-12Lifter Kit Hydraulic Flat Tappet for GM V6 & Inline 6 Cyl Set of 12 JB-817
    Price: $89.95
    Weight: 10.92
    Quantity in Package:
    		Set of 12 Hydraulic Lifters
    for GM inline 6 cylinder and V6 with hydraulic lifter cams.
    Replaces 12 of Mercruiser #: 72638
    Flat Tappet (LH/RH), Hydraulic (LH) Lifter Cam, Chain Drive
    MELV1194Valve, Intake GM SB V8 1.72
    Price: $12.95
    Weight: 0.54
    		Intake Valve for GM Small Block V8 1.72
    Flat Tappet (LH/RH), Hydraulic (LH) Lifter Cam, Chain Drive
    MELV1195Valve, Intake, GM Small Block,1.94 Inch
    Price: $8.95
    Weight: 0.55
    		Intake Valve, GM Small Block V8, 1.94" diameter
    Flat Tappet (LH/RH), Hydraulic (LH) Lifter Cam, Chain Drive
    MELV1206Valve, Exhaust GM SB V8 1.50
    Price: $21.95
    Weight: 0.54
    		Exhaust Valve for GM Small Block V8 - 1.50"
    Flat Tappet (LH/RH), Hydraulic (LH) Lifter Cam, Chain Drive

    Other Engine Items

    MWMSB-BALHarmonic Balancer for GM V6-V8
    Price: $129.95
    Weight: 8.50
    		Harmonic Balancer for many GM small block V-6 and V-8 engines. This balancer measures 6-3/4" in diameter.
    Flat Tappet (LH/RH), Hydraulic (LH) Lifter Cam, Chain Drive