Code / Price	Name / Description
CDI511-73W    $20.95      Quantity in Basket: none	Wire Jumper Kit, Johnson, Evinrude 5-Wire Jumper Kit for Johnson/Evinrude Replaces: 35-009
CDI511-7900    $183.95      Quantity in Basket: none	Remote Starter, Mercury 511-7900 Mercury Remote Starter Remote Starter works with most Mercury engines with the small cannon plug style head 1979-2006.  Replaces boat side control harness at the engine to eliminate the boat harness as a source of trouble.
CDI511-9710    $86.95      Quantity in Basket: none	Trigger Tester, Outboard Motors 511-9710 Trigger Tester Ideal for testing Mercury/Mariner triggers, Chrysler/Force triggers and Chrysler pre-amp and hall effect sensors, OMC 1988 and up V6 Quick Start timer bases. Also used on OMC OIS ignition, EFI.
CDI511-9764    $20.95      Quantity in Basket: none	Spark Gap Tester, Neon Indicator 511-9764 Neon Spark Tester 1 Cyl Sealed spark tester can be used inline to the spark plug while the engine is running or it can be connected to engine ground for cranking speed tests. Troubleshooting and Installation Guide (pdf)
CDI511-9766    $62.95      Quantity in Basket: none	Spark Gap Tester, Adjustable 511-9766 Spark Tester Spark tester can be used to test from 1 to 8 cylinders. Sealed design reduces the possibility of fire. NOTE: If extension wires are needed, order P/N: 511-9903 (set of 4 wires). Tech Sheet (pdf) Troubleshooting and Installation Guide (pdf)
CDI511-9770    $88.95      Quantity in Basket: none	Piercing Probe Set Piercing Probe Set No need to disconnect harness or wires. Fully insulated probes have a spring loaded clamp with a tiny stainless steel pin that self centers and punctures the insulation. (Hole will normally reseal itself when the wire heats up.) Ideal for taking DVA readings on all engines and Jet Drive systems. This set is highly recommended for use with all meters and peak reading adapters. Set contains 1 Red and 1 Black probe.
CDI511-9772    $64.95      Quantity in Basket: none	DC Ampmeter Adapter 511-9772 Ampmeter Adapter Replaces: PL88 Use to replace ignition coil for testing DVA output from ignition pack if a bad coil is suspected.
CDI511-9773    $75.95      Quantity in Basket: none	DVA Peak Voltage Adapter Peak Reading DVA Voltage Adapter for all Fluke digital volt meters. The readings will be close to the Stevens CD77 and Merc-Otronic specs. Ideal companion with Piercing Probe Set CDI511-9770. (See application chart in the Troubleshooting Guide for readings on OMC, Mercury, and Chrysler/Force.)
CDI511-9773NL    $75.95      Quantity in Basket: none	DVA Peak Voltage Adapter without leads Peak Reading DVA Voltage Adapter for all Fluke digital volt meters. This adapter does not include the leads. If you require one with leads, please order CDI511-9773. The readings will be close to the Stevens CD77 and Merc-Otronic specs. Ideal companion with Piercing Probe Set CDI511-9770. (See application chart in the Troubleshooting Guide for readings on OMC, Mercury, and Chrysler/Force.)
CDI511-9775    $18.95      Quantity in Basket: none	Load Resistor Load Resistor To load the output of ignition modules when testing ignition coils. Used for testing DVA outputs from power packs and switch boxes. Replacement for Stevens PL88.
CDI511-9788B    $68.95      Quantity in Basket: none	Noise Filter Adapter 2 cycle noise filter used with Fluke 88 meter with RPM pickup, P/N 518-RMP80, to reduce outboard noise interference for inductive pickup applications.
CDI511-9800    $9.95      Quantity in Basket: none	Multimeter Resistor Test Card Resistor Test Card for Multimeters
CDI511-9902    $24.95      Quantity in Basket: none	Spark Tester Wire 7" Extension Wire for use with the CDI511-9766 Spark Gap Tester (Set of 4)
CDI511-9903    $28.95      Quantity in Basket: none	Spark Tester Wire 24" Extension Wire for use with the CDI511-9766 Spark Gap Tester (Set of 4)
CDI518-116    $299.95      Quantity in Basket: none	Fluke Multimeter Replaces discontinued CDI518-16 (series) meters AutoVolt: automatic AC/DC voltage selection Large white LED backlight to work in poorly lit areas Resistance and continuity Min/Max/Average to record signal fluctuations Can read micro amperage Three-Year Factory limited warranty
CDI518-88    $650.95      Quantity in Basket: none	Fluke 88 Meter Kit with DVA Adapter Measures 2 and 4 stroke RPM ranges, volts, ohms, amperage, dwell, and injector pulse width. It has the capability of recording maximum and minimum RPM and volts. Backlight display readout is easy to-read in dim light. Offers specialized functions like RPM, duty cycle, dwell, relative change, lo-ohms and smoothing. Complete with deluxe test leads, probes and clips. Packaged in a battle-tough carrying case.
CDI519-T125    $25.95      Quantity in Basket: none	Thermomelt Temp Stiks, 125 degree F Stevens Thermomelt Temp Stiks, 125°F Long lasting Temp Stiks provide a quick and reliable means to check cooling systems. With engine warmed up, the temp stik is used like a crayon to make a mark on the head or block. The mark will appear dull and chalky. On a typical engine, the CDI-T125 (125°) should melt, turning liquid and glossy in appearance. If it does not, the engine is running too cold. A mark made with the CDI-T163 (163°) should not melt. If it does, the engine is running too hot.
CDI519-T163    $25.95      Quantity in Basket: none	Thermomelt Temp Stiks, 163 degree F Stevens Thermomelt Temp Stiks, 163°F Long lasting Temp Stiks provide a quick and reliable means to check cooling systems. With engine warmed up, the temp stik is used like a crayon to make a mark on the head or block. The mark will appear dull and chalky. On a typical engine, the CDI-T125 (125°) should melt, turning liquid and glossy in appearance. If it does not, the engine is running too cold. A mark made with the CDI-T163 (163°) should not melt. If it does, the engine is running too hot.
CDI551-33-1    $159.95      Quantity in Basket: none	Gearcase Filler Gearcase Filler With Check Valve A new design in gearcase fillers makes it easier to fill or flush gearcases. The check valve venting system helps prevent spilling any gear lube. The check valve on the vent allows you to remove the filler nozzle without loosing any appreciable amount of lubricant. Includes CDI551-33CV E-Z Fill. Replaces Stevens S33. Non-corrosive plastic container. Sturdy teardrop design resists tipping over.
CDI551-334M    $11.95      Quantity in Basket: none	Adaptor, Metric, Grease Filler Metric Adapter for Grease Filler Replaces 519-34M, 551-33M, 551-34M For all motors except Suzuki.
CDI551-334S    $10.95      Quantity in Basket: none	Gearcase Metric Adaptor for Suzuki Metric Adapter for Suzuki motors for use with CDI551-33GF E-Z Fill
CDI551-33CV    $20.95      Quantity in Basket: none	Filler Vent Check Valve Filler Vent Check Valve Calibrated check valve creates airlock to keep lube from running out while you install drain plug. Includes 4" Hose. A must for all shops! Included with CDI551-33GF.
CDI551-34PV    $219.95      Quantity in Basket: none	Pressure, Vacuum Tester Pressure/Vacuum Tester Repairable metal unit does both vacuum and pressure testing. Combination unit that does pressure and vacuum testing in one unit. Replaces S34 and V34 testers. Includes CDI551-34TN with hose.
CDI551-34TN    $11.95      Quantity in Basket: none	Threaded Nozzle, Pressure-Vacuum Tester Threaded Nozzle Fits and is included in CDI551-34PV Pressure/Vacuum Tester.
CDI551-5110    $109.95      Quantity in Basket: none	Flywheel Holder Flywheel Holder. New design has a high tensil strength, poly coated, woven belt for a more secure grip of flywheel. Longer handle provides a more comfortable grip for more leverage with less effort.
CDI551-9765    $39.95      Quantity in Basket: none	Spark Plug Wire Puller Spark Plug Wire Puller With Unique Grounding Lead. Ground clip greatly reduces the chance of getting shocked.
CDI553-2697    $34.95      Quantity in Basket: none	Pin Insertion Tool Pin Insertion Tool Replaces 322697
CDI553-2698    $27.95      Quantity in Basket: none	Pin Removal Tool Pin Removal Tool Replaces 322698
CDI553-2699    $27.95      Quantity in Basket: none	Socket Removal Tool Socket Removal Tool Replaces 322699
CDI553-2700    $75.95      Quantity in Basket: none	Pin Tool Set Amphenol Pin Tool Set Set contains one each of CDI553-2697 (insertion), CDI553-2698 (pin removal), and CDI553-2699 (socket removal) tools.
CDI553-9702    $10.95      Quantity in Basket: none	Sensor Gap Gage, Johnson, Evinrude Sensor Gap Tool, Use to reset the air-gap on Johnson/Evinrude sensor to flywheel clearance (Power Pack 3,4)
CDI554-9706    $22.95      Quantity in Basket: none	Amp Pin Removal Tool Amp Pin Removal Tool Used to remove the connector pins in the ignition system on Chrysler/Force engines using the Prestolite type ignitions. Also used on Mercury TPI sensor connectors.
CDI911-9783    $12.95      Quantity in Basket: none	Bullet Connector Kit Bullet Connector Kit Contains: 10 each Male Bullet with Boots, and 10 Female Bullets with Sleeves. Contains 10 pieces each of the male, female connectors and sleeves.
CDI923-3356    $8.95      Quantity in Basket: none	Kill Plug, Large Large Kill Plug Replaces 513356
CDI923-3404    $11.95      Quantity in Basket: none	Kill Plug, Small Small Kill Plug Replaces 123404
CDI991-9705    $27.95      Quantity in Basket: none	Grease, Dielectric Dielectric Grease, 3 oz. tube. Used to help seal connections and inhibit corrosion. Gives better electrical contact and high voltage isulation. Dielectric Grease is used to keep water and corrosion out of connectors.
MAL9-15400    $21.95      Quantity in Basket: none	Ignition Safety Switch, Outboard Switch, Ignition Safety Replaces: Mercury MP 40970 Fits: Universal
MAL9-79816    $6.95      Quantity in Basket: none	Tester, fuel, Mercury 91-879172T28 (percentage of alcohol) Tester, fuel Replaces: Mercury 91-879172T28 Instructions: Fill with water to the line, fill with gas to the neck, put lid on and shake vigorously, stand vertical with cap on, let stand for 10 minutes, locate the gas/water separation line and read scale for percentage of alcohol.
MAL9-81002    $15.95      Quantity in Basket: none	Oil Pump, Lower Unit, Quart Oil Pump for Quart bottle, 4 cc pump and 3/8” - 16 swivel metal marine filler fitting.  Ideal for adding Gear Lube and other fluids to small engines and marine lower units.  Flexible Hose for hard-to-reach fill plugs.  Adaptor included with pump fits Mercruiser, Mercury, OMC, Evinrude, Johnson, Volvo, Force, Sears,  Gamefisher, and Honda (70 HP and up) Models
SMI01117    $22.95      Quantity in Basket: none	Oil - Fuel Filter Wrench This handy wrench removes screw on type marine water separator fuel filters and most oil filters Tough, forged stainless steel
THDFMK-1-DP    $20.95      Quantity in Basket: none	Double Flusher Twin Outboard Engine Flush Kit The Double Flusher™ twin outboard boat engine flush kit allows you to flush two outboards at the same time and allows you to quickly turn water off and on while you are at the motors. Flush Twin Outboards at the Same Time Attaches to any outboard flush port or ear muff flush devices Connection Ends for Male or Female Connectors Convenient Valve Turns Water On or Off and Adjusts Pressure, saves walk to spigot Saves Time and Water
THQF-1K-DP    $16.95      Quantity in Basket: none	Quick Flush Outboard Engine Flush Kit Complete Kit Johnson Evinrude Quick Flush™ Outboard Flush Fitting Complete Kit for Johnson/Evinrude T-H Marine introduces a quick and easy way to flush any outboard equipped with a flushing port. No more removing the plug and twisting hoses to flush. Replace the plug with the Quick Flush™ and snap the hose on and off. Normal operating watter pressure keeps the valve sealed when using engine. Check out these features: Makes flushing outboard quick and easy Unique Patented slide valve replaces outboard flushing port plug O-ring seal closes off port when operating engine Quick connect on hose snaps onto valve for flushing No plug to remove and no difficult turning of hose into port Takes the hassle out of flushing your outboard Fits all outboards equipped with a flushing port Kit consists of Patented slide valve, hose quick connector, and washer
THQF-2K-DP    $16.95      Quantity in Basket: none	Quick Flush Outboard Engine Flush Kit Complete Kit Mercury Yamaha Quick Flush™ Outboard Flush Fitting Complete Kit for Mercury, Yamaha and other outboards T-H Marine introduces a quick and easy way to flush any outboard equipped with a flushing port. No more removing the plug and twisting hoses to flush. Replace the plug with the Quick Flush™ and snap the hose on and off. Normal operating watter pressure keeps the valve sealed when using engine. Check out these features: Makes flushing outboard quick and easy Unique Patented slide valve replaces outboard flushing port plug O-ring seal closes off port when operating engine Quick connect on hose snaps onto valve for flushing No plug to remove and no difficult turning of hose into port Takes the hassle out of flushing your outboard Fits all outboards equipped with a flushing port Kit consists of Patented slide valve, hose quick connector, and washer
THQFV-2-DP    $12.95  Sorry, THQFV-2-DP is temporarily backordered. Please check back later. Quantity in Basket: none	Quick Flush Outboard Engine Flush Kit Slide Valve Only Mercury Yamaha Quick Flush™ Outboard Flush Fitting Slide Valve (installs on Mercury, Yamaha and other outboard motors) T-H Marine introduces a quick and easy way to flush any outboard equipped with a flushing port. No more removing the plug and twisting hoses to flush. Replace the plug with the Quick Flush™ and snap the hose on and off. Normal operating watter pressure keeps the valve sealed when using engine. Check out these features: Makes flushing outboard quick and easy Unique Patented slide valve replaces outboard flushing port plug O-ring seal closes off port when operating engine Quick connect on hose snaps onto valve for flushing No plug to remove and no difficult turning of hose into port Takes the hassle out of flushing your outboard Fits all outboards equipped with a flushing port Kit consists of Patented slide valve, hose quick connector, and washer
THWDSW-3-B-DP    $68.95      Quantity in Basket: none	Boat Wash Down Station Sand Shell Lid 15 ft White Hose Pistol Grip Nozzle Boat Wash Down Station - White Hose - Pistol Grip Nozzle - Sand Shell Lid Flush Mounted Wash Down Station with Lid Storage Tube with Screw Out Cover Includes 15 Feet of High Quality Poly Coiled Hose Includes Plumbing Fitting to Attach to Wash Down Pump