Home > Outboard Parts > Mercury Mariner Outboards > Trim System for Mercury Mariner Outboards > Trim Motors for Mercury Mariner Outboards



Application Charts
Find your Trim/Tilt Hydraulic Assembly Easy!
Application Charts
Find your Trim/Tilt Motor Easy!

Trim Motors for Mercury Mariner Outboards
Code / Price Name / Description
APIMRV1000   

$52.95 

   
Quantity in Basket: none
Valve Manual Release Mercury Mariner Outboard 813442A2


Manual Release Valve used on Mercury Mariner single ram & Three ram Power Trim Tilt systems.
The manual release valve allows you to raise or lower the engine if the trim system starts working. Basically it releases the hysraulic pressure on the lifting ram so you can manually raise or lower the motor.
Replaces: Mercury # 813442A2, 89392A01
 
APIPT440N   

$399.95 

   
Quantity in Basket: none
Tilt Trim Motor Reservoir Pump for Mercury Outboard & Mercruiser Sterndrive


New 12V 3-Wire Power Tilt Trim Motor/Reservoir/Reman Pump
Fits Mercury Outboard, Mercruiser Sterndrive (I/O),
Replaces Mercury Marine Quicksilver original equipment part #s 67914A1, 74436A9, 76395A5, 79271A4, 88475A5, 92975A6; Mallory # 9-18210; Arco # 6217; Sierra # 18-6799

This unit is supplied complete with motor, reservoir, and hydraulic pump, but does not include the valve block.
Use the original valve block to connect the hydraulic lines to this API pump.
How to determine which Trim Motor your Mercury / Mariner Outboard needs.
 
APIPT475TN-4   

$423.95 

   
Quantity in Basket: none
Power Trim Motor-Pump, Mercury 35-220 HP Outboards Design 1


Power Trim Motor-Pump, 12 volt, 2-wire
Replaces OEM: Mercury 99186, 99186T, 826729A01
Fits Mercury 35-220 HP with Design 1, 3-ram trim system, 3-wire motor

Fits newer 3-ram side-fill trim
Mercury 3-Ram Side Fill Trim
(Click image to enlarge)


How to determine which Trim Motor your Mercury / Mariner Outboard needs.
 
APIPT486NM-OE   

$208.95 

   
Quantity in Basket: none
Tilt Trim Motor Mercury V6 135-250 HP Rear Fill 3 Ram 2 Wire 828708


Original Equipment Mercury replacement Tilt Trim Motor
Fits late model (1995-on) Mercury 135, 150, XR6, Magnum III, 175, 200, 225, 250 HP; 105-140 HP Jet
with 2wire connection and bullet connector terminal ends
Mercury # 828708, 878265A1, 878265A4

Fits newer 3-ram aft-fill trim
Mercury 3-Ram Aft Fill Trim
(Click image to enlarge)


How to determine which Trim Motor your Mercury / Mariner Outboard needs.
 
ARC6217   

$199.95 

   
Quantity in Basket: none
Tilt Trim Motor and Reservoir for Mercury Mercruiser Prestolite 1970-1982


Fits Mercruiser and Volvo Penta Outdrives using the Prestolite style motor with 3 wire connection and ring terminal ends. Fits most Mercruiser applications from 1970 to 1982 This unit does not include the pump or valve body. Only the motor and reservoir are included. Will replace plastic or cast aluminum reservoir models.
Supplied with screws, gasket and adapter
Mercury # 67914A2, 76395A2, 93247A4, 93247A7
 
ARC6218   

$159.95 
   
Quantity in Basket: none
Tilt Trim Motor for Mercruiser Mercury Mariner 17649 17649A1 17649T 87828


OEM Tilt Trim Motor (Motor Only) Fits: Mercruiser I/O's & Mercury outboards with Oildyne pump, to replace Early square-style motor, 12 Volt, Ring Terminal Ends, Replaces: Mercury 17649, 17649A1, 17649T, 87828 Sierra 18-6772; MES MEST1087M
How to determine which Trim Motor your Mercury / Mariner Outboard needs.
 
ARC6250   

$209.95 
   
Quantity in Basket: none
Tilt Trim Motor for Mercury Mariner V6 1995 up 2 Wire 2 Bolt 878265A4


New Mercury Replacement Tilt Trim Motor
Fits late model 1995-Up Mercury 135, 150, XR6, Magnum III, 175, 200, 225, 250 HP; 105-140 HP Jet
with 2wire connection and bullet connector terminal ends and Rear Fill Reservoir.
Mercury Marine Quicksilver original equipment part #s: 828708, 828708T, 878265A1, 878265A4; MES # T1082M; API # PT-486NM; Arco # 6250; Mallory # 9-18204; Sierra # 18-6773

Fits newer 3-ram Rear fill trim
Mercury 3-Ram Aft Fill Trim
(Click image to enlarge)


How to determine which Trim Motor your Mercury / Mariner Outboard needs.
 
ARC6255   

$199.00 
   
Quantity in Basket: none
Tilt Trim Motor for Mercury and Force 25-75HP 2 Wire 1984-99 827675A1


Tilt Trim Motor for Mercury and Force Outboard Engines.
It fits late model Mercury Force 25-50 HP Outboard engines with 2 wire connections and bullet connector terminal ends using a single lifting ram.
Replaces OEM: 827675A1
How to determine which Trim Motor your Mercury / Mariner Outboard needs.
 
ARC6274   

$312.95 
   
Quantity in Basket: none
Tilt Trim Motor Reservoir Kit for Mercury Mariner Force Single Ram 65-120HP 824051


Power Trim Motor And reservoir Kit. It Fits Single Ram Systems on Mercury Mariner And Force Outboards, And Replaces The Square 3-wire Motor With The 4-Bolt mount. This Kit Contains The Conversion Wire Harness, Coupler, O-Ring, And Mounting bolts. This item Replaces O.E.M. # 824051.

Fits older trim with 3-wire, square or round motor with hex bolts
Mercury Single Ram Trim
(Click image to enlarge)


How to determine which Trim Motor your Mercury / Mariner Outboard needs.
 
ARC6276   

$267.95 
   
Quantity in Basket: none
Tilt Trim Motor For Mercury Force 40-125 HP Single Ram 2 Wire 885654T1


Tilt Trim Motor for late model Mercury Mariner, & Force 40-125 HP Outboards with single ram and 2 wire connection with bullet connector terminal ends.
It replaces Mercury Marine Quicksilver original equipment part #s: 819479A1, 819480A1, 809885A1, 809885A2,  809885T2, 813447, 885654T1; Force Quicksilver original equipment part #s: 819479A1, 81948OA1; Sierra # 18-6777; Mallory # 9-18203; Arco # 6276; API # PT-496NK-2; MES # T1075M
Square Seal replaces O-Ring Models
How to determine which Trim Motor your Mercury / Mariner Outboard needs.

 
ARC6277   

$209.95 
   
Quantity in Basket: none
Tilt Trim Motor for Mercury Mariner Outboard with Side Fill applications


Heavy Duty Tilt/Trim Motor (Motor Only) For side fill applications only. Fits ARC6278 Cartridge Pump only! 2 bolt mount, Ring Terminal Ends. NOTE: This motor WILL NOT replace original equipment motors. Order ARC6278.
How to determine which Trim Motor your Mercury / Mariner Outboard needs.
 
ARC6279   

$209.95 

   
Quantity in Basket: none
Tilt Trim Motor, Mercury, Mariner Outboard, Rear, Heavy Duty


HEAVY-DUTY Trim/Tilt Motor Fits: Mercury/Mariner outboards with Design II, 3 ram, 3 wire trim units, Hollow-hex shaft, With AFT FILL Reservoir, 3-wire connection, 2 bolt mount, Shaft adapter and O-ring included, Ring Terminal Ends (Replaces old square style motor) Replaces: Mercury 811628, 828708A1

Fits newer 3-ram aft-fill trim
Mercury 3-Ram Aft Fill Trim
(Click image to enlarge)



How to determine which Trim Motor your Mercury / Mariner Outboard needs.
 
MAL9-18108   

$229.95 
   
Quantity in Basket: none
Tilt Trim Motor for Johnson Evinrude Chrysler 35-75HP 68-79 2 Bolt 173944


Motor Tilt Trim Fits Many Small Johnson Evinrude 20-75 HP Outboards with 3 Wire and 2 Bolt Mounting. Gasket Included.
Replaces: Prestolite: ETF4003, ESZ4015, ESZ4017, ESI4001; OMC: 172588, 173944, fits OMC # 173946 Pump assembly; Arco: 6228; API: PT102NM
fits OMC Tilt Trim Motor # 173946
 
MAL9-18200   

$259.95 
   
Quantity in Basket: none
Valve Body Tilt Trim Pump for Force Round Base 4 Hose 85-150HP 86-91 820545


Valve Body Trim Pump for Force Tilt Trim Motors. Prestolite style with Round Base.
Replaces: Force F694541-2, F694541-1, 820545
Fits: 85-150 hp 1986-91, 4 hose connections.
How to determine which Trim Motor your Mercury / Mariner Outboard needs.
 
MAL9-18201   

$199.95 
   
Quantity in Basket: none
Tilt Trim Motor Kit for Mercury 1993-1995 3 Ram 3 Wire


Mercury Mariner Replacement Tilt Trim Motor
Fits Mercury Mariner Outboards with Design II Rear Fill with 3 Rams, 2 bolt mount. Converts Original 3 Wire motor that used solenoids to the 2 wire motor with relays.
Supplied with Wire Harness Relay Kit
Mercury # 811628

Fits newer 3-ram side-fill trim
Mercury 3-Ram Aft Fill Trim
(Click image to enlarge)


How to determine which Trim Motor your Mercury / Mariner Outboard needs.
 
MAL9-18202   

$299.95 

   
Quantity in Basket: none
Tilt Trim Motor for Mercury Mariner Force 75-125 1987-95 Single Ram 824051


Tilt Trim Motor for late model Mercury Mariner, & Force 40-125 HP Outboards with single ram and 2 wire connection with bullet connector terminal ends.
It replaces Mercury Marine Quicksilver original equipment part #s: 819479A1, 819480A1, 809885A1, 809885A2,  809885T2, 813447, 885654T1; Force Quicksilver original equipment part #s: 819479A1, 81948OA1; Sierra # 18-6777; Mallory # 9-18203; Arco # 6276; API # PT-496NK-2; MES # T1075M
Square Seal replaces O-Ring Models
How to determine which Trim Motor your Mercury / Mariner Outboard needs.

 
MAL9-18204   

$208.95 
   
Quantity in Basket: none
Tilt Trim Motor for Mercury Mariner V6 1995 up 2 Wire 2 Bolt 878265A4


New Mercury Replacement Tilt Trim Motor
Fits late model 1995-Up Mercury 135, 150, XR6, Magnum III, 175, 200, 225, 250 HP; 105-140 HP Jet
with 2wire connection and bullet connector terminal ends and Rear Fill Reservoir.
Mercury Marine Quicksilver original equipment part #s: 828708, 828708T, 878265A1, 878265A4; MES # T1082M; API # PT-486NM; Arco # 6250; Mallory # 9-18204; Sierra # 18-6773

Fits newer 3-ram Rear fill trim
Mercury 3-Ram Aft Fill Trim
(Click image to enlarge)


How to determine which Trim Motor your Mercury / Mariner Outboard needs.
 
MAL9-18205   

$269.95 

Sorry, MAL9-18205 is temporarily backordered. Please check back later.


Quantity in Basket: none
Tilt Trim Motor Kit, Mercury, Mariner


Power Trim Motor Kit for a Mercury/Mariner Outboard. The kit contains a new 2-wire motor, mounting flange, oil seal, o-ring, coupler, hardware, & wire harness. The kit replaces obsolete square Eaton motors used from 1985-92. This item replaces Merc. # 99186T.

Fits newer 3-ram side-fill trim
Mercury 3-Ram Side Fill Trim
(Click image to enlarge)


How to determine which Trim Motor your Mercury / Mariner Outboard needs.
 
MAL9-18206   

$389.95 
   
Quantity in Basket: none
Trim Motor and Pump for Mercury 35-220 HP for Side Fill 3 Ram 99186T 826729A01


Replacement Round Style Cartridge Pump and Motor to replace Mercury/Mariner
Fits 1985-1992 Mercury/Mariner 35-220 HP Magnum II Outboards with (Design 1) 3 Ram with side fill reservoir.
Replaces Round Prestolite and Square Style Eaton.
Supplied with Wire Harness Relay Kit which converts the old 3 wire motor to the much improved two wire motor, and also replaces the trim solenoids with the newer style relays.

Replaces Mercury: 99186, 99186T, 99186-1; Arco: 6278
Mercury 3-Ram Side Fill Trim
(Click image to enlarge)


How to determine which Trim Motor your Mercury / Mariner Outboard needs.
 
MAL9-18208   

$424.95 
   
Quantity in Basket: none
Tilt Trim Motor and Pump Round Base Force Outboard 85-150 HP 1986-1991 F660541


Tilt and Trim motor and Pump assembly for Force outboards. This pump has 4 hose connections and 2 wire motor and 3 bolt mount. It will fit 85 - 150 HP 1986-91. Replaces O.E.M # F660541


How to determine which Trim Motor your Mercury / Mariner Outboard needs.
 

MAL9-18209   

$249.95 
   
Quantity in Basket: none
Valve Body Tilt Trim Pump for Force Round Base 4 Hose 85-150HP 86-91 820545


Valve Body Trim Pump for Force Tilt Trim Motors. Prestolite style with Round Base.
Replaces: Force F694541-2, F694541-1, 820545
Fits: 85-150 hp 1986-91, 4 hose connections.
How to determine which Trim Motor your Mercury / Mariner Outboard needs.
 
MAL9-18210   

$199.95 
   
Quantity in Basket: none
Tilt Trim Motor and Reservoir for Mercury Mercruiser Prestolite 1970-1982


Fits Mercruiser and Volvo Penta Outdrives using the Prestolite style motor with 3 wire connection and ring terminal ends. Fits most Mercruiser applications from 1970 to 1982 This unit does not include the pump or valve body. Only the motor and reservoir are included. Will replace plastic or cast aluminum reservoir models.
Supplied with screws, gasket and adapter
Mercury # 67914A2, 76395A2, 93247A4, 93247A7
 
MAL9-18211   

$199.95 
   
Quantity in Basket: none
Tilt Trim Motor for Mercury and Force 25-75HP 2 Wire 1984-99 827675A1


Tilt Trim Motor for Mercury and Force Outboard Engines.
It fits late model Mercury Force 25-50 HP Outboard engines with 2 wire connections and bullet connector terminal ends using a single lifting ram.
Replaces OEM: 827675A1
How to determine which Trim Motor your Mercury / Mariner Outboard needs.
 
MAL9-18213   

$409.95 
   
Quantity in Basket: none
Trim Motor and Pump for Mercury 35-220 HP for Side Fill 3 Ram 99186T 826729A01


Replacement Round Style Cartridge Pump and Motor to replace Mercury/Mariner
Fits 1985-1992 Mercury/Mariner 35-220 HP Magnum II Outboards with (Design 1) 3 Ram with side fill reservoir.
Replaces Round Prestolite and Square Style Eaton.
Supplied with Wire Harness Relay Kit which converts the old 3 wire motor to the much improved two wire motor, and also replaces the trim solenoids with the newer style relays.

Replaces Mercury: 99186, 99186T, 99186-1; Arco: 6278
Mercury 3-Ram Side Fill Trim
(Click image to enlarge)


How to determine which Trim Motor your Mercury / Mariner Outboard needs.
 
MAL9-18214   

$229.95 
   
Quantity in Basket: none
Tilt Trim 3 Wire 2 Bolt Side Fill for Mercury Outboard 45-220HP 826729A4 99186T


Power Trim Motor for Mercury Outboards with a 3 wire version of MAL9-18205 (No conversion harness) Replaces O.E.M. #826729A4, 99186 1, 99186T

Fits newer 3-ram side-fill trim
Mercury 3-Ram Side Fill Trim
(Click image to enlarge)


How to determine which Trim Motor your Mercury / Mariner Outboard needs.
 
MAL9-18215   

$189.95 
   
Quantity in Basket: none
Tilt Trim Motor for Mercury Outboard 3 Ram 3 Wire Rear Fill 811628


Power Trim Motor replaces OEM: Mercury: 811628
Fits Mercury Outboards 1993-1995 with 3-ram, 3-wire system

Fits newer 3-ram aft-fill trim
Mercury 3-Ram Aft Fill Trim
(Click image to enlarge)


How to determine which Trim Motor your Mercury / Mariner Outboard needs.
 
MAL9-18216   

$229.95 
   
Quantity in Basket: none
Tilt Trim Pump 3 Ram for Mercury Mariner 35-225 HP Cartridge Style Pump


Valve Body for Mercury/Mariner Outboards with a 3 Ram Integral Design 1 System - 35-225 HP - No Mounting Flange

Fits newer 3-ram side-fill trim
Mercury 3-Ram Side Fill Trim
(Click image to enlarge)


How to determine which Trim Motor your Mercury / Mariner Outboard needs.
 
MAL9-18619   

$259.95 
   
Quantity in Basket: none
Reservoir Valve Body with Pump for Mercury 225-275 HP and Early Aplha Outdrives


Trim Motor Pump Reservoir for Mercury 225-275 HP Outboards
How to determine which Trim Motor your Mercury / Mariner Outboard needs.
 
MER855998A10   

$1,199.00 

Sorry, MER855998A10 is temporarily backordered. Please check back later.


Quantity in Basket: none
Trim Assembly, Mercury 225-250 Pro XS 3.0L Outboard


Trim Assembly for Mercury Outboard
Replaces OEM: 855998A09, 855998A10, 855998A05, 855998A3, 855998T1, 826729T2
Fits Mercury: 200HP DFI, 225HP EFI & Carb, 225HP DFI, 250 EFI, V-135, V-150, V-200, XR-6
How to determine which Trim Motor your Mercury / Mariner Outboard needs.
 
MER93247A7   

$699.00 
   
Quantity in Basket: none
Tilt Trim Pump Assembly, Replaces older Mercury, Mariner


Trim Pump Assembly Replacement pump for Prestolite high pressure/low flow system

Fits prior to 1984
Mercury Older Trim prior to 1984
(Click image to enlarge)



How to determine which Trim Motor your Mercury / Mariner Outboard needs.
 
MEST1074M   

$169.95 

   
Quantity in Basket: none
Tilt Trim Motor for Mercury and Force 25-75HP 2 Wire 1984-99 827675A1


Tilt Trim Motor for Mercury and Force Outboard Engines.
It fits late model Mercury Force 25-50 HP Outboard engines with 2 wire connections and bullet connector terminal ends using a single lifting ram.
Replaces OEM: 827675A1
How to determine which Trim Motor your Mercury / Mariner Outboard needs.
 
MEST1080M   

$324.95 

   
Quantity in Basket: none
Tilt Trim Motor for Mercruiser Mercury Mariner Can Reservoir 92459A4


New Mercury Replacement Trim Motor & Pump that replaces Original Equipment Oildyne Pump on Mercury Outboards & Mercruiser Sterndrives. It fits many Late Model Mercury Outboards 225-275 HP that have the pump inside the boat. This item replaces Merc. # 823653A5, 92459A4; ARCO # 6270.
How to determine which Trim Motor your Mercury / Mariner Outboard needs.
 
MEST1083M   

$389.95 

   
Quantity in Basket: none
Tilt Trim Motor, Mercury, Mariner Side Fill 3 Ram


Replacement Round Style Cartridge Pump and Motor to replace Mercury/Mariner
Fits 1985-1992 Mercury/Mariner 35-220 HP Magnum II Outboards with (Design 1) 3 Ram with side fill reservoir.
Replaces Round Prestolite and Square Style Eaton.

Replaces Mercury Marine Quicksilver original equipment part #s: 99186, 99186T, 99186-1; Arco # 6278
Mercury 3-Ram Side Fill Trim
(Click image to enlarge)


How to determine which Trim Motor your Mercury / Mariner Outboard needs.
 
MEST1083M-R   

$389.95 

   
Quantity in Basket: none
Trim Motor and Pump for Mercury 35-220 HP for Side Fill 3 Ram 99186T 826729A01


Replacement Round Style Cartridge Pump and Motor to replace Mercury/Mariner
Fits 1985-1992 Mercury/Mariner 35-220 HP Magnum II Outboards with (Design 1) 3 Ram with side fill reservoir.
Replaces Round Prestolite and Square Style Eaton.
Supplied with Wire Harness Relay Kit which converts the old 3 wire motor to the much improved two wire motor, and also replaces the trim solenoids with the newer style relays.

Replaces Mercury: 99186, 99186T, 99186-1; Arco: 6278
Mercury 3-Ram Side Fill Trim
(Click image to enlarge)


How to determine which Trim Motor your Mercury / Mariner Outboard needs.
 
MEST1087M   

$129.95 

   
Quantity in Basket: none
Trim Motor 3 Wire ALL Mercruiser Outdrive 1985 Up Oildyne 17649A1 87828


New Mercury Replacement Tilt Trim Motor for Mercruiser Sterndrives and Mercury Mariner Outboards. It fits all late model Mercruisers with a white plastic reservoir or a round canister reservoir. It will also replace the Square Body Motor. This item replaces Merc. oem # 17649, 17649A1, & 87828
How to determine which Trim Motor your Mercury / Mariner Outboard needs.
 
MEST1161M   

$224.95 

   
Quantity in Basket: none
Tilt Trim Motor and Reservoir 3 Wire for Johnson Evinrude Force Outboard


New Tilt Trim Motor and Reservoir
Fits Chrysler, Force, Johnson, Evinrude with 3 wire connection
Chrysler # 44-9541-1, 45-5541
Force # F17556, F17563
OMC # 172543, 382715
 
PH200-T001   

$198.95 

   
Quantity in Basket: none
Trim Motor for Mercury Mariner 3 Wire Side Fill 99186 99186T 99186-1


Mercury Replacement Trim Motor (only) for Mercury/Mariner. with 3-wire Trim Motor
OEM: 99186, 99186T, 99186-1
NOTE: Motor will replace O.E. Square-Style Eaton, and Will Work on All O.E. Hydraulic Pump Assemblies for Mercury/Mariner 35-220 HP Outboards with (Design I) 3 Ram

Fits newer 3-ram side-fill trim
Mercury 3-Ram Side Fill Trim
(Click image to enlarge)


How to determine which Trim Motor your Mercury / Mariner Outboard needs.
 
PH200-T003   

$199.95 

   
Quantity in Basket: none
Tilt Trim Motor For Mercury Force 40-125 HP Single Ram 2 Wire 885654T1


Tilt Trim Motor for late model Mercury Mariner, & Force 40-125 HP Outboards with single ram and 2 wire connection with bullet connector terminal ends.
It replaces Mercury Marine Quicksilver original equipment part #s: 819479A1, 819480A1, 809885A1, 809885A2,  809885T2, 813447, 885654T1; Force Quicksilver original equipment part #s: 819479A1, 81948OA1; Sierra # 18-6777; Mallory # 9-18203; Arco # 6276; API # PT-496NK-2; MES # T1075M
Square Seal replaces O-Ring Models
How to determine which Trim Motor your Mercury / Mariner Outboard needs.

 
PH200-T008   

$324.95 

   
Quantity in Basket: none
Tilt Trim Motor for Mercruiser Mercury Mariner Can Reservoir 92459A4


New Mercury Replacement Trim Motor & Pump that replaces Original Equipment Oildyne Pump on Mercury Outboards & Mercruiser Sterndrives. It fits many Late Model Mercury Outboards 225-275 HP that have the pump inside the boat. This item replaces Merc. # 823653A5, 92459A4; ARCO # 6270.
How to determine which Trim Motor your Mercury / Mariner Outboard needs.
 
PH200-T010   

$189.95 

   
Quantity in Basket: none
Tilt Trim Motor for Mercury Mariner V6 1995 up 2 Wire 2 Bolt 878265A4


New Mercury Replacement Tilt Trim Motor
Fits late model 1995-Up Mercury 135, 150, XR6, Magnum III, 175, 200, 225, 250 HP; 105-140 HP Jet
with 2wire connection and bullet connector terminal ends and Rear Fill Reservoir.
Mercury Marine Quicksilver original equipment part #s: 828708, 828708T, 878265A1, 878265A4; MES # T1082M; API # PT-486NM; Arco # 6250; Mallory # 9-18204; Sierra # 18-6773

Fits newer 3-ram Rear fill trim
Mercury 3-Ram Aft Fill Trim
(Click image to enlarge)


How to determine which Trim Motor your Mercury / Mariner Outboard needs.
 
PH200-T011   

$389.95 

Sorry, PH200-T011 is temporarily backordered. Please check back later.


Quantity in Basket: none
Trim Motor and Pump for Mercury 35-220 HP for Side Fill 3 Ram 99186T 826729A01


Replacement Round Style Cartridge Pump and Motor to replace Mercury/Mariner
Fits 1985-1992 Mercury/Mariner 35-220 HP Magnum II Outboards with (Design 1) 3 Ram with side fill reservoir.
Replaces Round Prestolite and Square Style Eaton.
Supplied with Wire Harness Relay Kit which converts the old 3 wire motor to the much improved two wire motor, and also replaces the trim solenoids with the newer style relays.

Replaces Mercury: 99186, 99186T, 99186-1; Arco: 6278
Mercury 3-Ram Side Fill Trim
(Click image to enlarge)


How to determine which Trim Motor your Mercury / Mariner Outboard needs.
 
PH200-T015   

$129.95 

   
Quantity in Basket: none
Trim Motor 3 Wire ALL Mercruiser Outdrive 1985 Up Oildyne 17649A1 87828


New Mercury Replacement Tilt Trim Motor for Mercruiser Sterndrives and Mercury Mariner Outboards. It fits all late model Mercruisers with a white plastic reservoir or a round canister reservoir. It will also replace the Square Body Motor. This item replaces Merc. oem # 17649, 17649A1, & 87828
How to determine which Trim Motor your Mercury / Mariner Outboard needs.
 
PH200-T032   

$189.95 

   
Quantity in Basket: none
Tilt Trim Motor 3 Ram Mercury Mariner Rear Fill 2 Bolt with Relays 811628


Mercury Mariner Replacement Tilt Trim Motor
Fits Mercury Mariner Outboards with Design II Rear Fill with 3 Rams, 2 bolt mount. Converts Original 3 Wire motor that used solenoids to the 2 wire motor with relays.
Supplied with Wire Harness Relay Kit
Mercury # 811628

Fits newer 3-ram side-fill trim
Mercury 3-Ram Aft Fill Trim
(Click image to enlarge)


How to determine which Trim Motor your Mercury / Mariner Outboard needs.
 
PH200-T033   

$279.95 

   
Quantity in Basket: none
Tilt Trim Motor for Mercury Mariner Force 75-125 1987-95 Single Ram 824051


Tilt Trim Motor for late model Mercury Mariner, & Force 40-125 HP Outboards with single ram and 2 wire connection with bullet connector terminal ends.
It replaces Mercury Marine Quicksilver original equipment part #s: 819479A1, 819480A1, 809885A1, 809885A2,  809885T2, 813447, 885654T1; Force Quicksilver original equipment part #s: 819479A1, 81948OA1; Sierra # 18-6777; Mallory # 9-18203; Arco # 6276; API # PT-496NK-2; MES # T1075M
Square Seal replaces O-Ring Models
How to determine which Trim Motor your Mercury / Mariner Outboard needs.

 
PH200-WH01   

$49.95 

   
Quantity in Basket: none
Harness Wire for Mercury and Yamaha Outboard Tilt Trim Motors


Wire Harness for Tilt Trim Motors. Converts older 3 wire field coil motors to newer 2 wire permanent magnet style motors.

Easy Hookup. Remove old solenoids and mount relays where solenoids once were.
Simple Wire instructions:

Black Ring Terminal to Ground
Red Terminal to Power
Male Bullet Green to Green on Motor
Male Bullet Blue to Blue on Motor
Female Blue on Harness to Blue from Control
Female Green on Harness to Green from Control.

Fits Yamaha and Mercury Outboard applications
 

Application Charts
Find your Trim/Tilt Hydraulic Assembly Easy!
Application Charts
Find your Trim/Tilt Motor Easy!