 |  |
Couplings, Couplers & Kits for Mercruiser
| Code / Price | Name / Description |
| BPI11500 $139.95 Quantity in Basket: none |
Engine Coupler, Mercruiser, up to 350 CID
This Coupling fits all GM engines with a two piece rear main seal. All GM V8 engines 1985 and earlier are 2-piece seal engines. This also fits inline GM enignes 1984 and earlier that did not use the triangular coupling. |
| BPI11510 $139.95 Quantity in Basket: none |
Engine Coupler, Mercruiser, Ford
Coupling used on all Mercruiser Ford engines |
| BPI18643A2 $179.95 Quantity in Basket: none |
Coupling Assembly 14", Mercruiser
flex plate style coupling for late Model small crankshaft bolt pattern style engines with 14 flywheel This is not a NEW item. A "take-off" item with limited supplies. Same as SIE18-2175 without Yoke or Parts, includes bolts Take-Off 
|
| GLM11520 $199.95 Quantity in Basket: none |
Engine Coupler, Mercruiser, GM V6, V8
A Coupler used on a Mercruiser Sterndrive. This Coupling is used when a new replacement V6/V8 GM with a 1-piece rear main seal is used to replace an older V6 or V8 GM with a 2-piece rear main seal.*Note* the bell housing on older Models will not clear a triangular coupler. This item replaces Merc. oem # 14505A2.
|
| GLM21040 $26.95 Quantity in Basket: none |
Motor Mounts, Rear, Mercruiser Transom
These are the Rear Motor Mounts that Mercruiser used on MR/Alpha One and Alpha One Stern Drives From 1983 & Up. Two are required per engine. This item replaces OEM: 99297A1 |
| GLM21050 $2.49 Quantity in Basket: none |
Spacer, Rear Engine Mount
Rear Engine Mount Spacer for MAL9-58000 Motor Mount Replaces: 23-99322 |
| MAL9-58000 $21.95 Quantity in Basket: none |
Motor Mount, Rear, Mercruiser Transom
Rear Motor Mount with spacer for Mercruiser Inboard/Outboard. This item replaces Merc.OEM: # 99297A1. |
| MAL9-72500 $199.95 Quantity in Basket: none |
Engine Coupler, Mercruiser GM V6, Small Block V8
Coupling for a Mercruiser sterndrive. It is generally used when replacing a 2 piece rear main seal engine with the newer 1 piece rear main seal engine (V-6 & V-8 small block). it is held on the crankshaft by the same studs that hold the flywheel on. This item replaces Merc. # 14505A2. |
| MAL9-72501 $217.95 Quantity in Basket: none |
Engine Coupler, Mercruiser Ford 225, 233, 888
This Coupling fits all of the V8 Ford based Mercruiser sterndrive engines. This item replaces Merc. # 58926A3. |
| MAL9-72502 $140.95 Quantity in Basket: none |
Engine Coupler, Mercruiser, up to 350 CID
This Coupling fits all GM engines with a two piece rear main seal. All GM V8 engines 1985 and earlier are 2 piece seal engines. This also fits inline GM enignes 1984 and earlier that did not use the triangular coupling. |
| MAL9-72503 $309.95 Quantity in Basket: none |
Engine Coupler, Mercruiser Bravo
This is the round coupling that fits the Mercruiser Bravo Outdrive. It replaces Merc. # 18311A17 & # 861523A9. |
| MAL9-72504 $239.95 Quantity in Basket: none |
Engine Coupler Assembly, Mercruiser 470, 485
Engine Coupler or a Mercruiser Sterndrive with a 3.7L engine. This coupling is the model that is held on with the same studs that hold the flywheel on. This is the earlier coupling. The later version was held onto the flywheel with separate bolts. This was usually used on 1982 and earlier I/O units. This item replaces Merc. # 69354A2. |
| MAL9-72505 $259.95 Quantity in Basket: none |
Engine Coupler Assembly, Mercruiser 3.7L 83-89
Engine Coupler for a Mercruiser Sterndrive with a 3.7L (224 cid) engine. This coupling can be identified by being held on the flywheel with bolts, and not by the same studs that hold the flywheel on the motor. |
| MAL9-72506 $150.95 Quantity in Basket: none |
Engine Coupler, Mercruiser 4 Cyl.87-98
This triangular coupling fits all four cylinder engines with a 12 inch flywheel that had a triangular coupling originally. If you do not know your flywheel diameter you can look at your starter. If you starter is held on with 1 long and 1 short bolt the flywheel diameter is 12 inches. If your starter is held on with 2 long bolts the flywheel diameter is 14 inches. |
| MAL9-72507 $209.95 Quantity in Basket: none |
Engine Coupler, Mercruiser MR, Alpha 14 Inch Flywheel Models
This triangular coupling fits all applications that use a 14 inch flywheel on Mercruiser Alpha drives. This fits V8 & V6 from 1987 and newer and 4 cylinder 3.0L engines 1999 and newer with a 14 inch flywheel. If you do not know your flywheel diameter you can look at your starter. if you starter is held on with 1 long and 1 short bolt the flywheel diameter is 12 inches. If your starter is held on with 2 long bolts the flywheel diameter is 14 inches. |
| MER69354A2 $299.00 Quantity in Basket: none |
Coupling Assembly, Mercruiser 3.7L 76-82
Coupling Assembly fits Mercruiser 224 cid/3.7L 4 cyl. 1976-1982 |
| MER861523A11 $649.00 Quantity in Basket: none |
Coupler Assembly, Mercruiser Bravo, Heavy Duty
Coupler Assembly for Bravo Models round style New heavy duty design replaces 18311A17 (supersedes MER861523A9) |
| MER861523A9 $449.00 Quantity in Basket: none |
Coupler Assembly, Mercruiser Bravo, Standard
Standard Round Coupling for Bravo |
| SIE18-2195 $219.95 Quantity in Basket: none |
Coupler-Engine Mercruiser 4 Cylinder
Replaces: 12632A7 Flex plate style for GM 4 Cylinder Engines with late style, small crankshaft bolt pattern
|
