Transit Times
click here to read our Freight Policy
Shipping on parts in the Continental US

Buy Today, Ship Today

orders placed before 4PM edt
Non-US Customers, click here

 


Shop safely and securelyThis Is A Secure Site
Order with Confidence!






  Battery Chargers and Inverters
  Boarding Steps and Stairs
  Boat Cleaners, Waxes, Protectants
  Boat Leveler Co. Trim Parts
  Boat Seats
  Caddies
  CDI Electronics
  Controls and Steering
  Cooling System
  Dock Boxes and Bench Ends
  Electrical System
  Electronic Boxes
  Engine System
  Exhaust System
  Fire Extinguishers
  Fuel System
  Gauges and Senders
  Hardware - Boat Seating and Tables
  Hoses
  Leaning Posts
  Lubricants and Grease Guns
  Marine Electrical - Blue Sea Systems
   Battery Switches - Blue Sea Systems
   Busbars - Blue Sea Systems
   Circuit Breakers - Blue Sea Systems
   Connectors - Blue Sea Systems
   Fuse Blocks - Blue Sea Systems
   Fuses - Blue Sea Systems
   Insulators - Blue Sea Systems
   Meters - Blue Sea Systems
   Panels - Blue Sea Systems
   Switches - Blue Sea Systems
  Oil Removal System
  Outdrive Stands
  Propellers
  Raw Water Plumbing Fittings
  Service Manuals
  Spill Kits
  Steering Consoles
  STOLTZ Trailer Accessories
  Table Top Packages
  Tanks
  Throttles
  Zincs , Anodes





Remanufactured
marine engines by:

Want A Catalog?
Do you have your Basic Power Catalog?

Subscribe to our E-List
Name:

Email:

 Home > All Applications > Marine Electrical - Blue Sea Systems > Switches - Blue Sea Systems
 
Switches - Blue Sea Systems  Switches - Blue Sea Systems



Switch Battery HD ON-OFF
Part Number: BLS3000
Weight: 1.2
Price: $68.95
Quantity in Basket: none

HD-Series Battery Switch Single Circuit ON/OFF


Voltage Rating48 Volts DC Maximum
Terminal Stud Size1/2" (M12)
Inrush Rating: 0.25 sec (10 repeats)*2000 Amperes DC
Cranking Rating: 9.75 sec (10 repeats)*1200 Amperes DC
Intermittent Rating: 5 min (UL 1107)900 Amperes DC
Continuous Rating: (UL 1107)600 Amperes DC
Terminal Stud, Tin-Plated Copper1/2" (accepts M12 terminal ring)
Maximum Voltage Rating48 Volts DC
Cable Quantity to Meet RatingsTwo Cables
Case MaterialReinforced Polycarbonate
Cable Clearance For 4/0 AWG Cables1.10" (27.9mm)
Terminal Stud Torque220 in-lb (24.86N+m)
Cable Size to Meet Ratings4/0 AWG (95mm¦)
Weight Lb (Kg)1.30 (0.59)
Agency StandardsUL Listed - UL 1107 Electric Power Switch Meets UL 1500 and SAE J1171 external ignition protection requirements

  • Meets American Boat and Yacht Council (ABYC) requirements for battery switches
  • Ignition protected - Safe for installation aboard gasoline powered boats
  • Case design allows surface or rear panel mounting
  • Accpets two 4/0 AWG (95mm2) battery cables
  • M12 tin-plated copper studs for maximum conductivity and corrosion resistance, accepts 1/2" and M12 ring terminals
  • 7/8" (22.22mm) stud length to accept multiple cable terminals
  • Tactile textures indicate knob position by feel only
  • Case design allows surface or rear panel mounting

    • Uses One Piece design Studs
    Blue Sea Systems Superior One Piece Stud Design
     
     



    Switch Battery Mini ON-OFF with Key
    Part Number: BLS6005
    Weight: 0.62
    Price: $23.22
    Quantity in Basket: none

    m-Series (Mini) Battery Switch Single Circuit ON/OFF


    Terminal Stud Size3/8" - 16 (M10)
    Cable Size to Meet Ratings4/0 AWG (95mm2)
    Cable Clearance For 4/0 AWG Cables1.12" (28.4mm)
    Continuous Rating: (UL 1107)300 Amperes DC
    Terminal Stud, Tin-Plated Copper3/8" - 16 (M10)
    Case MaterialReinforced Polycarbonate
    Terminal Stud Torque140 in-lbs. (15.82 N.m)
    Agency StandardsCE Marked
    Agency StandardsUL Listed - UL 1107 electric power switches Meets UL 1500 and SAE J1171 external ignition protection requirements
    Inrush Rating: 0.25 sec (10 repeats)*1500 Amperes DC
    Cranking Rating: 9.75 sec (10 repeats)*700 Amperes DC
    Intermittent Rating: 5 min (UL 1107)500 Amperes DC
    Maximum Voltage Rating48 Volts DC
    Weight Lb (Kg)0.62 (0.28)

    Note: 6005 replaces 9005

  • Ignition protected - Safe for installation aboard gasoline powered boats
  • Case design allows surface, front panel, or rear panel mounting
  • Isolating cover with snap-on sections protects rear contacts
  • 3/8"-16 tin-plated copper studs for maximum conductivity and corrosion resistance, accepts 3/8" and M10 ring terminals
  • 7/8" (22.22mm) stud length to accept multiple cable terminals
  • Ideal for marine or RV applications
  • All non-corrosive marine grade metals
  • Molded in durable reinforced polycarbonate
  • Tactile textures indicate knob position by feel only
  • Label with international ON/OFF legends
  • Removable key or knob remains positively retained
  • ICON label set included for circuit identification

    • Uses One Piece design Studs
    Blue Sea Systems Superior One Piece Stud Design
     
     



    Switch Battery Mini ON-OFF with Knob
    Part Number: BLS6006
    Weight: 0.63
    Price: $23.95
    Quantity in Basket: none

    m-Series (Mini) Battery Switch Single Circuit ON/OFF


    Terminal Stud Size3/8" - 16 (M10)
    Cable Size to Meet Ratings4/0 AWG (95mm2)
    Cable Clearance For 4/0 AWG Cables1.12" (28.4mm)
    Continuous Rating: (UL 1107)300 Amperes DC
    Terminal Stud, Tin-Plated Copper3/8" - 16 (M10)
    Case MaterialReinforced Polycarbonate
    Terminal Stud Torque140 in-lbs. (15.82 N.m)
    Agency StandardsCE Marked
    Agency StandardsUL Listed - UL 1107 electric power switches Meets UL 1500 and SAE J1171 external ignition protection requirements
    Inrush Rating: 0.25 sec (10 repeats)*1500 Amperes DC
    Cranking Rating: 9.75 sec (10 repeats)*700 Amperes DC
    Intermittent Rating: 5 min (UL 1107)500 Amperes DC
    Maximum Voltage Rating48 Volts DC
    Weight Lb (Kg)0.65 (0.29)

    Note 6006 replaces 9006

  • Ignition protected - Safe for installation aboard gasoline powered boats
  • Case design allows surface, front panel, or rear panel mounting
  • Isolating cover with snap-on sections protects rear contacts
  • 3/8"-16 tin-plated copper studs for maximum conductivity and corrosion resistance, accepts 3/8" and M10 ring terminals
  • 7/8" (22.22mm) stud length to accept multiple cable terminals
  • Ideal for marine or RV applications
  • All non-corrosive marine grade metals
  • Molded in durable reinforced polycarbonate
  • Tactile textures indicate knob position by feel only
  • Label with international ON/OFF legends
  • Removable key or knob remains positively retained
  • ICON label set included for circuit identification

    • Uses One Piece design Studs
    Blue Sea Systems Superior One Piece Stud Design
     
     



    Solenoid CL Series BatteryLink ACR
    Part Number: BLS7600
    Weight: 0.63
    Price: $85.95
    Quantity in Basket: none

    CL-Series BatteryLink™ ACR


    Input Voltage9-16 Volts DC
    Voltage Rating16 Volts DC for 12 Volts DC Nominal Systems
    Contact FormSPST-NO
    Terminal Stud Size3/8" (M10)
    Mechanical Life1.000.000 Cycles
    Weight Lb (Kg)0.85 (0.39)
    Agency StandardsMeets SAE J1171 external ignition protection requirements
    Agency StandardsMeets SAE J1171 - external ignition protection requirements
    Current Limiting60A at 25C ambient

  • Automatically combines battery banks during chargeing cycle and isolates under discharge
  • Activates from any charging source - alternators, battery charges, or solar panels
  • Senses charge voltages on up to two battery banks
  • Ignition protected - safe for installation aboard gasoline powered boats
  • Meets SAE J1171 - External ignition protection requirements
  • Noise free circuitry will not interfere with other devices
  • Limits cuurent flow allowing smaller wire size
  • Low current draw when closed:<0.2A

    • Automatic OperationAutomatically combines when the higher battery has remained at the required voltage for at least 30 seconds. The CL-Series BatteryLinkTM ACR disconnects when the voltage drops below the charging voltage to prevent accidental discharge of an unintended bank.Manual OperationWhen connected to an optional ON-OFF-ON switch the CL-Series BatteryLinkTM ACR can be turned off, set to automatic, or manually combined

  • CE Marked
  • Automatically combines battery banks during the charging cycle and isolates under discharge
  • Ignition protected - safe for installation aboard gasoline-powered boats
  • Activates from any charging source - alternators, battery chargers, or solar panels



    •
     
     



    Switch Contura SPST OFF-ON
    Part Number: BLS8230
    Weight: 1.2
    Price: $10.95
    Quantity in Basket: none

    Switch Contura SPST OFF-ON


    Indicator Light Life100,000 hour half life
    Current Rating20A @ 12V DC, 15A @ 24V DC
    Mounting Hole1.45" x 0.83" (36.83mm x 21.08mm)
    LED Amperage18 Milliamperes
    SealsInternal and external gasket panel seal
    Temperature Rating-40 degrees C to +85 Degrees C

  • Vibration, shock, thermoshock, moisture and salt spray resistant
  • Specially manufactured for mounting in Blue Sea Systems' water resistant panels
  • Ignition Protected - Safe for installation aboard gasoline powered boats
  • Meets UL1500 and ISO8846 ignition protection requirements



    •
     
     



    Switch Contura SPST OFF-ON Black
    Part Number: BLS8282
    Weight: 0.25
    Price: $10.82
    Quantity in Basket: none

    Switch Contura SPST OFF-ON Black


    Indicator Light Life100,000 hour half life
    Current Rating20A @ 12V DC, 15A @ 24V DC
    Mounting Hole1.45" x 0.83" (36.83mm x 21.08mm)
    LED Amperage18 Milliamperes
    SealsInternal and external gasket panel seal
    Temperature Rating-40 degrees C to +85 Degrees C

  • Vibration, shock, thermoshock, moisture and salt spray resistant
  • Specially manufactured for mounting in Blue Sea Systems' water resistant panels
  • Ignition Protected - Safe for installation aboard gasoline powered boats
  • Meets UL1500 and ISO8846 ignition protection requirements



    •
     
     



    Switch Battery e Selector
    Part Number: BLS9001E
    Weight: 1.1
    Price: $39.95
    Quantity in Basket: none

    e-Series Battery Switch Selector


    Inrush Rating: 0.25 sec (10 repeats)*1750 Amperes DC
    Cranking Rating: 9.75 sec (10 repeats)*900 Amperes DC
    Intermittent Rating: 5 min (UL 1107)600 Amperes DC
    Continuous Rating: (UL 1107)350 Amperes DC
    Terminal Stud Torque140 in-lbs.(15.82 N.m)
    Cable Size to Meet Ratings4/0 (95 mm2)
    Maximum Voltage Rating48 Volts DC
    Terminal Stud, Tin-Plated Copper3/8" (accepts M10 terminal ring)
    Case MaterialReinforced Polycarbonate
    Cable Clearance For 4/0 AWG Cables1.10" (27.9mm)
    Weight Lb (Kg)1.15 (0.52)
    Agency StandardsUL Listed - UL 1107 Electric Power Switch / Meets UL 1500 and SAE J171 ignition protection requirements

    "Blue Sea Systems' switch (9001e) is our choice for best value in a standard-duty battery selector switch. It's made in the U.S. with high grade materials, comes with a lifetime warranty, and is the least expensive switch in ou test." - Powerboats Reports, June 2005

  • Make-before-break contact design allows switching between battery banks without power interruption
  • CE Marked
  • Ignition protected - Safe for installation aboard gasoline powered boats
  • Case design allows surface or rear panel mounting
  • Meets American Boat and Yacht Council (ABYC) requirements for battery switches
  • 3/8"-16 tin-plated copper studs for maximum conductivity and corrosion resistance, accepts 3/8" and M10 ring terminals
  • 7/8" (22.22mm) stud length to accept multiple cable terminals
  • Tactile textures indicate knob position by feel only

    • Uses One Piece design Studs
    Blue Sea Systems Superior One Piece Stud Design
     
     



    Switch Battery e Selector with AFD
    Part Number: BLS9002E
    Weight: 1.15
    Price: $39.95
    Quantity in Basket: none

    e-Series Battery Switch Selector with Alternator Field Disconnect


    Terminal Stud Torque140 in-lbs.(15.82 N.m)
    Cable Size to Meet Ratings4/0 (95 mm2)
    Inrush Rating: 0.25 sec (10 repeats)*1750 Amperes DC
    Cranking Rating: 9.75 sec (10 repeats)*900 Amperes DC
    Intermittent Rating: 5 min (UL 1107)600 Amperes DC
    Continuous Rating: (UL 1107)350 Amperes DC
    Terminal Stud, Tin-Plated Copper3/8" (accepts M10 terminal ring)
    Maximum Voltage Rating48 Volts DC
    Case MaterialReinforced Polycarbonate
    Cable Clearance For 4/0 AWG Cables1.10" (27.9mm)
    Weight Lb (Kg)1.15 (0.52)
    Agency StandardsUL Listed - UL 1107 Electric Power Switch / Meets UL 1500 and SAE J171 ignition protection requirements

  • Make-before-break contact design allows switching between battery banks without power interruption

    • Includes AFD (Alternator Field Disconnect)

  • CE Marked
  • Ignition protected - Safe for installation aboard gasoline powered boats
  • Case design allows surface or rear panel mounting
  • Meets American Boat and Yacht Council (ABYC) requirements for battery switches
  • 3/8"-16 tin-plated copper studs for maximum conductivity and corrosion resistance, accepts 3/8" and M10 ring terminals
  • 7/8" (22.22mm) stud length to accept multiple cable terminals
  • Tactile textures indicate knob position by feel only

    • Uses One Piece design Studs
    Blue Sea Systems Superior One Piece Stud Design
     
     



    Switch Battery e ON-OFF with AFD
    Part Number: BLS9004E
    Weight: 0.96
    Price: $49.95
    Quantity in Basket: none

    e-Series Battery Switch Single Circuit ON/OFF with Alternator Field Disconnect


    Terminal Stud Torque140 in-lbs.(15.82 N.m)
    Cable Size to Meet Ratings4/0 (95 mm2)
    Terminal Stud, Tin-Plated Copper3/8" (accepts M10 terminal ring)
    Inrush Rating: 0.25 sec (10 repeats)*1750 Amperes DC
    Cranking Rating: 9.75 sec (10 repeats)*900 Amperes DC
    Intermittent Rating: 5 min (UL 1107)600 Amperes DC
    Continuous Rating: (UL 1107)350 Amperes DC
    Maximum Voltage Rating48 Volts DC
    Case MaterialReinforced Polycarbonate
    Cable Clearance For 4/0 AWG Cables1.10" (27.9mm)
    Weight Lb (Kg)0.95 (0.43)
    Agency StandardsUL Listed - UL 1107 Electric Power Switch / Meets UL 1500 and SAE J171 ignition protection requirements

    Includes AFD (Alternator Field Disconnect)

  • CE Marked
  • Ignition protected - Safe for installation aboard gasoline powered boats
  • Case design allows surface or rear panel mounting
  • Meets American Boat and Yacht Council (ABYC) requirements for battery switches
  • 3/8"-16 tin-plated copper studs for maximum conductivity and corrosion resistance, accepts 3/8" and M10 ring terminals
  • 7/8" (22.22mm) stud length to accept multiple cable terminals
  • Tactile textures indicate knob position by feel only

    • Uses One Piece design Studs
    Blue Sea Systems Superior One Piece Stud Design
     
     
    eBasicPower Site is
    © 1999-2008 Basic Power Industries