Transit Times
click here to read our Freight Policy
Shipping on parts in the Continental US

Buy Today, Ship Today

orders placed before 4PM edt
Non-US Customers, click here

 


Shop safely and securelyThis Is A Secure Site
Order with Confidence!






  Battery Chargers and Inverters
  Boarding Steps and Stairs
  Boat Cleaners, Waxes, Protectants
  Boat Leveler Co. Trim Parts
  Boat Seats
  Caddies
  CDI Electronics
  Controls and Steering
  Cooling System
  Dock Boxes and Bench Ends
  Electrical System
  Electronic Boxes
  Engine System
  Exhaust System
  Fire Extinguishers
  Fuel System
  Gauges and Senders
  Hardware - Boat Seating and Tables
  Hoses
  Leaning Posts
  Lubricants and Grease Guns
  Marine Electrical - Blue Sea Systems
   Battery Switches - Blue Sea Systems
   Busbars - Blue Sea Systems
   Circuit Breakers - Blue Sea Systems
   Connectors - Blue Sea Systems
   Fuse Blocks - Blue Sea Systems
   Fuses - Blue Sea Systems
   Insulators - Blue Sea Systems
   Meters - Blue Sea Systems
   Panels - Blue Sea Systems
   Switches - Blue Sea Systems
  Oil Removal System
  Outdrive Stands
  Propellers
  Raw Water Plumbing Fittings
  Service Manuals
  Spill Kits
  Steering Consoles
  STOLTZ Trailer Accessories
  Table Top Packages
  Tanks
  Throttles
  Zincs , Anodes





Remanufactured
marine engines by:

Want A Catalog?
Do you have your Basic Power Catalog?

Subscribe to our E-List
Name:

Email:

 Home > All Applications > Marine Electrical - Blue Sea Systems > Panels - Blue Sea Systems
 
Panels - Blue Sea Systems  Panels - Blue Sea Systems



ToggleGuard for A+B Series CB
Part Number: BLS4100
Weight: 0.05
Price: $3.56
Quantity in Basket: none

ToggleGuard


MaterialPVC

  • Protects circuit breakers from being accidentally switched ON or OFF
  • Fits all A-Series single pole circuit breakers
  • Fits all panel switches
  • Can be used on any brand of circuit breaker panel using standard toggle type circuit breakers
  • Uses circuit breaker mounting screw hole
  • Includes 2 mounting screws



    •
     
     



    Panel WD 12VDC fused 6 pos gray
    Part Number: BLS4306
    Weight: 1.13
    Price: $87.44
    Quantity in Basket: none

    WeatherDeck™ Water Resistant Fuse Panel 6 Position - Gray


    Backlighting Voltage12 Volts DC Nominal
    Cover MaterialUV ResistantThermoplastic
    Maximum Voltage Rating12 Volts DC
    Backlighting Amperage Draw10mA/ Illuminated Circuit
    Height in" (mm)6.00 (152.40)
    Weight Lb (Kg)1.15 (0.52)
    Fuse Available1-40 Amperes
    Maximum Amperage Per Circuit15 Amperes
    Switch TypeOFF/ON Toggle with waterproof boot
    Fuse TypeATO/ATC Automotive Blade-Type
    Width in" (mm)3.88 (98.55)
    Panel MaterialReinforced Polycarbonate
    Switch Rating15 Amperes Maximum
    Panel Cumulative Rating90 Amperes

  • Rated IP67 - Temporary immersion for 30 minutes
  • Designed for flybridge and open cockpit applications
  • Independent label backlighting circuit for remote switching and dimming
  • Available in 2, 4, 6, and 8 circuit models
  • Each panel can be mounted in four different orientations
  • Integrated ATO/ATC fuse based circuit protection
  • Constructed from corrosion resistant materials
  • UV stabilized faceplate
  • Rugged UV stabilized waterproof boots
  • Compatible with all Blue Sea Systems Digital Dimmers
  • Includes 4215 - 30 Square Format Labels

    • Blow Delay Curve
     
     



    Fuse Holder 3AG Standard Screwdriver
    Part Number: BLS5020
    Weight: 0.02
    Price: $3.82
    Quantity in Basket: none

    Fuse Holder 3AGStandard Screwdriver


    Screw Terminal# 8-32 with Captive Star Lockwasher
    AGC/MDL Fuses1/8 to 30 Amperes
    Base MaterialReinforced Polycarbonate
    Weight Lb (Kg)0.55 (0.25)
    Maximum Voltage Rating32 Volts DC
    Maximum Amperage per Block100 Amperes
    Maximum Amperage Per Circuit30 Amperes
    Cover MaterialPolycarbonate
     
     



    Panel DC 8 Circuit Breaker
    Part Number: BLS8023
    Weight: 1.84
    Price: $180.90
    Quantity in Basket: none

    DC 8 Position


    Positions8
    Voltage12 or 24 Volts DC
    Width in" (mm)5.25 (133.35)
    Height in" (mm)7.50 (190.50)
    Weight Lb (Kg)1.95 (0.88)
    Installed Single Pole Circuit Breakers5 (15A)

  • All positive, negative and grounding buses installed, fully pre-wired
  • Panels with meters include toggle switch for mounting up to 3 battery banks
  • All panels with analog meters are owner upgradable to 24 Volts with 8240 or 8243 (18-32V DC meters)
  • All circuit label positions are backlit on standard panels - No kit required
  • "ON" indicating LEDs installed in all circuit positions
  • MIL-C-5541C or equivalent immersion undercoating for lifetime corrosion resistance
  • Two-part polyurethane slate gray finish
  • Heavy 1/8" aluminum 5052 alloy
  • Industry standard height and width
  • Countersunk mounting holes throughout
  • Detailed installation instructions and cutout template included
  • Includes set of 30 common Large Format Panel Labels
  • Over 500 individual labels available

    • Trip Delay Curve
     
     



    LED Amber .172" 12VDC
    Part Number: BLS8033
    Weight: 0.07
    Price: $2.84
    Quantity in Basket: none
    LED Amber 11/64in 12VDC

    LED Amber


    Mounting Hole11/64" (4.36mm)

  • Easily installed in any Blue Sea SystemsÆ circuit breaker panel
  • Simple push-in installation mounts in any thickness material
  • Useful as general indicator and alarm lights



    •
     
     



    LED Green .172" 120VAC
    Part Number: BLS8034
    Weight: 0.07
    Price: $2.84
    Quantity in Basket: none
    LED Green 11/64in 120VAC

    LED Green


    Mounting Hole11/64" (4.36mm)

  • Easily installed in any Blue Sea SystemsÆ circuit breaker panel
  • Simple push-in installation mounts in any thickness material
  • Useful as general indicator and alarm lights



    •
     
     



    Panel h2o 12VDC 6 pos vert
    Part Number: BLS8053
    Weight: 0.9
    Price: $127.95
    Quantity in Basket: none

    6 Position-Slate Gray


    Fuse Holder Rating20 Amperes maximum
    Maximum Voltage Rating24 Volts DC
    Width in" (mm)5.25 (133.35)
    Height in" (mm)7.50 (190.50)
    Weight Lb (Kg)1.20 (0.54)
    Voltage12 or 24 Volts DC
    Switch Rating20 Amperes @ 12 Volts DC, 15 Amperes @ 24 Volts DC
    Panel Cumulative Rating45 Amperes

  • Designed for flybridge and open cockpit applications
  • ON-OFF Contura Switches
  • ON indicating LEDs embedded in switches
  • Watertight mounting gasket included
  • Countersunk mounting holes throughout
  • Heavy 1/8"aluminum material
  • Two-part polyurethane slate gray finish
  • Industry standard height and width
  • Mil-Spec chemical treatment via immersion to protect every surface detail from corrosion
  • Completely wired and ready to install
  • Includes set of 30/60 common DC labels
  • Over 500 labels available

    • NOTE: Waterproof panel labels are not backlit
     
     



    Panel h2o 12VDC 3 pos vert
    Part Number: BLS8054
    Weight: 0.6
    Price: $78.84
    Quantity in Basket: none

    3 Position-Slate Gray


    Fuse Holder Rating20 Amperes maximum
    Width in" (mm)5.25 (133.35)
    Height in" (mm)3.75 (95.25)
    Weight Lb (Kg)0.70 (0.32)
    Maximum Voltage Rating24 Volts DC
    Voltage12 or 24 Volts DC
    Switch Rating20 Amperes @ 12 Volts DC, 15 Amperes @ 24 Volts DC
    Panel Cumulative Rating45 Amperes

  • Designed for flybridge and open cockpit applications
  • ON-OFF Contura Switches
  • ON indicating LEDs embedded in switches
  • Watertight mounting gasket included
  • Countersunk mounting holes throughout
  • Heavy 1/8"aluminum material
  • Two-part polyurethane slate gray finish
  • Industry standard height and width
  • Mil-Spec chemical treatment via immersion to protect every surface detail from corrosion
  • Completely wired and ready to install
  • Includes set of 30/60 common DC labels
  • Over 500 labels available

    • NOTE: Waterproof panel labels are not backlit
     
     



    LED Red .172" 120VAC
    Part Number: BLS8066
    Weight: 0.07
    Price: $2.84
    Quantity in Basket: none
    LED Red 11/64in 120VAC

    LED Red


    Mounting Hole11/64" (4.36mm)

  • Easily installed in any Blue Sea SystemsÆ circuit breaker panel
  • Simple push-in installation mounts in any thickness material
  • Useful as general indicator and alarm lights



    •
     
     



    LED Red .172" 12VDC
    Part Number: BLS8171
    Weight: 0.07
    Price: $2.84
    Quantity in Basket: none
    LED Red 11/64in 12VDC

    LED Red


    Mounting Hole11/64" (4.36mm)

  • Easily installed in any Blue Sea SystemsÆ circuit breaker panel
  • Simple push-in installation mounts in any thickness material
  • Useful as general indicator and alarm lights



    •
     
     



    LED Green .172" 12VDC
    Part Number: BLS8172
    Weight: 0.07
    Price: $2.84
    Quantity in Basket: none
    LED Green 11/64in 12VDC

    LED Green


    Mounting Hole11/64" (4.36mm)

  • Easily installed in any Blue Sea SystemsÆ circuit breaker panel
  • Simple push-in installation mounts in any thickness material
  • Useful as general indicator and alarm lights



    •
     
     



    Panel h2o 12VDC 8 pos horz
    Part Number: BLS8261
    Weight: 1.34
    Price: $164.95
    Quantity in Basket: none

    8 Position-Slate Gray


    Fuse Holder Rating20 Amperes maximum
    Maximum Voltage Rating24 Volts DC
    Voltage12 or 24 Volts DC
    Switch Rating20 Amperes @ 12 Volts DC, 15 Amperes @ 24 Volts DC
    Panel Cumulative Rating45 Amperes
    Width in" (mm)9.37 (238.00)
    Height in" (mm)3.75 (95.25)
    Weight Lb (Kg)1.40 (0.64)

  • Designed for flybridge and open cockpit applications
  • ON-OFF Contura Switches
  • ON indicating LEDs embedded in switches
  • Watertight mounting gasket included
  • Countersunk mounting holes throughout
  • Heavy 1/8"aluminum material
  • Two-part polyurethane slate gray finish
  • Industry standard height and width
  • Mil-Spec chemical treatment via immersion to protect every surface detail from corrosion
  • Completely wired and ready to install
  • Includes set of 30/60 common DC labels
  • Over 500 labels available

    • NOTE: Waterproof panel labels are not backlit
     
     



    Panel h2o 12VDC 4 pos horz
    Part Number: BLS8262
    Weight: 0.77
    Price: $98.12
    Quantity in Basket: none

    4 Position-Slate Gray


    Fuse Holder Rating20 Amperes maximum
    Maximum Voltage Rating24 Volts DC
    Voltage12 or 24 Volts DC
    Switch Rating20 Amperes @ 12 Volts DC, 15 Amperes @ 24 Volts DC
    Width in" (mm)5.25 (133.35)
    Height in" (mm)3.75 (95.25)
    Weight Lb (Kg)0.75 (0.34)
    Panel Cumulative Rating45 Amperes

  • Designed for flybridge and open cockpit applications
  • ON-OFF Contura Switches
  • ON indicating LEDs embedded in switches
  • Watertight mounting gasket included
  • Countersunk mounting holes throughout
  • Heavy 1/8"aluminum material
  • Two-part polyurethane slate gray finish
  • Industry standard height and width
  • Mil-Spec chemical treatment via immersion to protect every surface detail from corrosion
  • Completely wired and ready to install
  • Includes set of 30/60 common DC labels
  • Over 500 labels available

    • NOTE: Waterproof panel labels are not backlit
     
     
    eBasicPower Site is
    © 1999-2008 Basic Power Industries