|
|
| Code / Price |
Name / Description |
BLS4100
$3.56
Quantity in Basket:
none
|
ToggleGuard for A+B Series CB
ToggleGuard
Protects circuit breakers from being accidentally switched ON or OFFFits all A-Series single pole circuit breakersFits all panel switchesCan be used on any brand of circuit breaker panel using standard toggle type circuit breakers Uses circuit breaker mounting screw holeIncludes 2 mounting screws
|
BLS4306
$87.44
Sorry, This Item is No Longer Available.
Quantity in Basket:
none
|
Panel WD 12VDC fused 6 pos gray
WeatherDeck™ Water Resistant Fuse Panel 6 Position - Gray
| Backlighting Voltage | 12 Volts DC Nominal |
|---|
| Cover Material | UV ResistantThermoplastic |
|---|
| Maximum Voltage Rating | 12 Volts DC |
|---|
| Backlighting Amperage Draw | 10mA/ Illuminated Circuit |
|---|
| Height in" (mm) | 6.00 (152.40) |
|---|
| Weight Lb (Kg) | 1.15 (0.52) |
|---|
| Fuse Available | 1-40 Amperes |
|---|
| Maximum Amperage Per Circuit | 15 Amperes |
|---|
| Switch Type | OFF/ON Toggle with waterproof boot |
|---|
| Fuse Type | ATO/ATC Automotive Blade-Type |
|---|
| Width in" (mm) | 3.88 (98.55) |
|---|
| Panel Material | Reinforced Polycarbonate |
|---|
| Switch Rating | 15 Amperes Maximum |
|---|
| Panel Cumulative Rating | 90 Amperes |
|---|
Rated IP67 - Temporary immersion for 30 minutesDesigned for flybridge and open cockpit applicationsIndependent label backlighting circuit for remote switching and dimmingAvailable in 2, 4, 6, and 8 circuit modelsEach panel can be mounted in four different orientationsIntegrated ATO/ATC fuse based circuit protectionConstructed from corrosion resistant materialsUV stabilized faceplateRugged UV stabilized waterproof bootsCompatible with all Blue Sea Systems Digital DimmersIncludes 4215 - 30 Square Format Labels
Blow Delay Curve
|
BLS5020
$3.82
Quantity in Basket:
none
|
Fuse Holder 3AG Standard Screwdriver
Fuse Holder 3AGStandard Screwdriver
| Screw Terminal | # 8-32 with Captive Star Lockwasher |
|---|
| AGC/MDL Fuses | 1/8 to 30 Amperes |
|---|
| Base Material | Reinforced Polycarbonate |
|---|
| Weight Lb (Kg) | 0.55 (0.25) |
|---|
| Maximum Voltage Rating | 32 Volts DC |
|---|
| Maximum Amperage per Block | 100 Amperes |
|---|
| Maximum Amperage Per Circuit | 30 Amperes |
|---|
| Cover Material | Polycarbonate |
|---|
|
BLS8023
$180.90
Quantity in Basket:
none
|
Panel DC 8 Circuit Breaker
DC 8 Position
| Positions | 8 |
|---|
| Voltage | 12 or 24 Volts DC |
|---|
| Width in" (mm) | 5.25 (133.35) |
|---|
| Height in" (mm) | 7.50 (190.50) |
|---|
| Weight Lb (Kg) | 1.95 (0.88) |
|---|
| Installed Single Pole Circuit Breakers | 5 (15A) |
|---|
All positive, negative and grounding buses installed, fully pre-wiredPanels with meters include toggle switch for mounting up to 3 battery banksAll panels with analog meters are owner upgradable to 24 Volts with 8240 or 8243 (18-32V DC meters)All circuit label positions are backlit on standard panels - No kit required"ON" indicating LEDs installed in all circuit positionsMIL-C-5541C or equivalent immersion undercoating for lifetime corrosion resistanceTwo-part polyurethane slate gray finishHeavy 1/8" aluminum 5052 alloyIndustry standard height and widthCountersunk mounting holes throughout Detailed installation instructions and cutout template includedIncludes set of 30 common Large Format Panel LabelsOver 500 individual labels available
Trip Delay Curve
|
BLS8033
$2.84
Quantity in Basket:
none
|
LED Amber .172" 12VDC
LED Amber 11/64in 12VDC
LED Amber
| Mounting Hole | 11/64" (4.36mm) |
|---|
Easily installed in any Blue Sea SystemsÆ circuit breaker panelSimple push-in installation mounts in any thickness material Useful as general indicator and alarm lights
|
BLS8034
$2.84
Quantity in Basket:
none
|
LED Green .172" 120VAC
LED Green 11/64in 120VAC
LED Green
| Mounting Hole | 11/64" (4.36mm) |
|---|
Easily installed in any Blue Sea SystemsÆ circuit breaker panelSimple push-in installation mounts in any thickness material Useful as general indicator and alarm lights
|
BLS8053
$127.95
Quantity in Basket:
none
|
Panel h2o 12VDC 6 pos vert
6 Position-Slate Gray
| Fuse Holder Rating | 20 Amperes maximum |
|---|
| Maximum Voltage Rating | 24 Volts DC |
|---|
| Width in" (mm) | 5.25 (133.35) |
|---|
| Height in" (mm) | 7.50 (190.50) |
|---|
| Weight Lb (Kg) | 1.20 (0.54) |
|---|
| Voltage | 12 or 24 Volts DC |
|---|
| Switch Rating | 20 Amperes @ 12 Volts DC, 15 Amperes @ 24 Volts DC |
|---|
| Panel Cumulative Rating | 45 Amperes |
|---|
Designed for flybridge and open cockpit applicationsON-OFF Contura SwitchesON indicating LEDs embedded in switchesWatertight mounting gasket includedCountersunk mounting holes throughoutHeavy 1/8"aluminum materialTwo-part polyurethane slate gray finishIndustry standard height and widthMil-Spec chemical treatment via immersion to protect every surface detail from corrosionCompletely wired and ready to install Includes set of 30/60 common DC labelsOver 500 labels availableNOTE: Waterproof panel labels are not backlit
|
BLS8054
$78.84
Sorry, This Item is No Longer Available.
Quantity in Basket:
none
|
Panel h2o 12VDC 3 pos vert
3 Position-Slate Gray
| Fuse Holder Rating | 20 Amperes maximum |
|---|
| Width in" (mm) | 5.25 (133.35) |
|---|
| Height in" (mm) | 3.75 (95.25) |
|---|
| Weight Lb (Kg) | 0.70 (0.32) |
|---|
| Maximum Voltage Rating | 24 Volts DC |
|---|
| Voltage | 12 or 24 Volts DC |
|---|
| Switch Rating | 20 Amperes @ 12 Volts DC, 15 Amperes @ 24 Volts DC |
|---|
| Panel Cumulative Rating | 45 Amperes |
|---|
Designed for flybridge and open cockpit applicationsON-OFF Contura SwitchesON indicating LEDs embedded in switchesWatertight mounting gasket includedCountersunk mounting holes throughoutHeavy 1/8"aluminum materialTwo-part polyurethane slate gray finishIndustry standard height and widthMil-Spec chemical treatment via immersion to protect every surface detail from corrosionCompletely wired and ready to install Includes set of 30/60 common DC labelsOver 500 labels availableNOTE: Waterproof panel labels are not backlit
|
BLS8066
$2.84
Quantity in Basket:
none
|
LED Red .172" 120VAC
LED Red 11/64in 120VAC
LED Red
| Mounting Hole | 11/64" (4.36mm) |
|---|
Easily installed in any Blue Sea SystemsÆ circuit breaker panelSimple push-in installation mounts in any thickness material Useful as general indicator and alarm lights
|
BLS8171
$2.84
Quantity in Basket:
none
|
LED Red .172" 12VDC
LED Red 11/64in 12VDC
LED Red
| Mounting Hole | 11/64" (4.36mm) |
|---|
Easily installed in any Blue Sea SystemsÆ circuit breaker panelSimple push-in installation mounts in any thickness material Useful as general indicator and alarm lights
|
BLS8172
$2.84
Quantity in Basket:
none
|
LED Green .172" 12VDC
LED Green 11/64in 12VDC
LED Green
| Mounting Hole | 11/64" (4.36mm) |
|---|
Easily installed in any Blue Sea SystemsÆ circuit breaker panelSimple push-in installation mounts in any thickness material Useful as general indicator and alarm lights
|
BLS8261
$164.95
Quantity in Basket:
none
|
Panel h2o 12VDC 8 pos horz
8 Position-Slate Gray
| Fuse Holder Rating | 20 Amperes maximum |
|---|
| Maximum Voltage Rating | 24 Volts DC |
|---|
| Voltage | 12 or 24 Volts DC |
|---|
| Switch Rating | 20 Amperes @ 12 Volts DC, 15 Amperes @ 24 Volts DC |
|---|
| Panel Cumulative Rating | 45 Amperes |
|---|
| Width in" (mm) | 9.37 (238.00) |
|---|
| Height in" (mm) | 3.75 (95.25) |
|---|
| Weight Lb (Kg) | 1.40 (0.64) |
|---|
Designed for flybridge and open cockpit applicationsON-OFF Contura SwitchesON indicating LEDs embedded in switchesWatertight mounting gasket includedCountersunk mounting holes throughoutHeavy 1/8"aluminum materialTwo-part polyurethane slate gray finishIndustry standard height and widthMil-Spec chemical treatment via immersion to protect every surface detail from corrosionCompletely wired and ready to install Includes set of 30/60 common DC labelsOver 500 labels availableNOTE: Waterproof panel labels are not backlit
|
BLS8262
$98.12
Sorry, This Item is No Longer Available.
Quantity in Basket:
none
|
Panel h2o 12VDC 4 pos horz
4 Position-Slate Gray
| Fuse Holder Rating | 20 Amperes maximum |
|---|
| Maximum Voltage Rating | 24 Volts DC |
|---|
| Voltage | 12 or 24 Volts DC |
|---|
| Switch Rating | 20 Amperes @ 12 Volts DC, 15 Amperes @ 24 Volts DC |
|---|
| Width in" (mm) | 5.25 (133.35) |
|---|
| Height in" (mm) | 3.75 (95.25) |
|---|
| Weight Lb (Kg) | 0.75 (0.34) |
|---|
| Panel Cumulative Rating | 45 Amperes |
|---|
Designed for flybridge and open cockpit applicationsON-OFF Contura SwitchesON indicating LEDs embedded in switchesWatertight mounting gasket includedCountersunk mounting holes throughoutHeavy 1/8"aluminum materialTwo-part polyurethane slate gray finishIndustry standard height and widthMil-Spec chemical treatment via immersion to protect every surface detail from corrosionCompletely wired and ready to install Includes set of 30/60 common DC labelsOver 500 labels availableNOTE: Waterproof panel labels are not backlit
|