Continental US

Transit Times
Click here to read our Shipping Policy
 Buy Today, Ship Today

orders placed before 4PM edt
Non-US Customers, click here

 









  Anchor Windlass
  Battery Chargers and Inverters
  Boarding Steps and Stairs
  Boat Cleaners, Waxes, Protectants
  Boat Leveler Co. Trim Parts
  Boat Seats
  Caddies
  CDI Electronics
  Controls and Steering
  Cooling System
  Dock Boxes and Bench Ends
  Electrical System
  Electronic Boxes
  Engine System
  Exhaust System
  Fire Extinguishers
  Fuel System
  Gauges and Senders
  Hardware - Boat Seating and Tables
  Hoses
  Leaning Posts
  Lubricants and Grease Guns
  Marine Electrical - Blue Sea Systems
   Battery Switches - Blue Sea Systems
   Busbars - Blue Sea Systems
   Circuit Breakers - Blue Sea Systems
   Connectors - Blue Sea Systems
   Fuse Blocks - Blue Sea Systems
   Fuses - Blue Sea Systems
   Insulators - Blue Sea Systems
   Meters - Blue Sea Systems
   Panels - Blue Sea Systems
   Switches - Blue Sea Systems
  Oil Removal System
  Outdrive Stands
  Propellers
  Raw Water Plumbing Fittings
  Service Manuals
  SkegShields
  Spill Kits
  Steering Consoles
  STOLTZ Trailer Accessories
  Table Top Packages
  Tanks
  Throttles
  Zincs , Anodes





Remanufactured
marine engines by:

Want A Catalog?
Do you have your Basic Power Catalog?

Subscribe to our E-List
Name:

Email:

 Home > All Applications > Marine Electrical - Blue Sea Systems > Fuse Blocks - Blue Sea Systems
 
Fuse Blocks - Blue Sea Systems  Fuse Blocks - Blue Sea Systems
Code / Price Name / Description
BLS5001   

$21.16
   
Quantity in Basket: none 		Fuse Block MEGA 100-300A



Fuse Block MEGA 100-300A


Weight Lb (Kg)0.35 (0.16)
Recommended Torque132 in-lb (14.9 N-m)
SEA Fuses Available100-300 Amperes DC
Maximum Voltage Rating32 Volts DC
Maximum Amperage300 Amperes DC
Base MaterialReinforced PBT
Cover MaterialPolycarbonate

  • The most economical system for 100-300 Ampere fusing
  • Insulating cover satisfies ABYC/USCG requirements and cover breakouts allow wire access in any direction
  • For use on systems up to 32V DC
  • 5/16™ stud terminals accept 5/16" (M8) Ring Terminals, 14AWG to 2/0 AWG Wire
  • Stainless steel studs provide resistance to corrosion and high torquing for excellent electrical contact
  • UL 94-V0 base resists high heat
  • Insert molded studs ensure secure fuse mounting

    • Blow Delay Curve

    BLS5002   

    $59.82
       
    Quantity in Basket: none     		Fuse Block Class T 225-400 Amp



    Fuse Block Class T 225-400 Amp


    Maximum Amperage400 Amperes DC
    Maximum Voltage Rating160 Volts DC
    Weight Lb (Kg)1.55 (0.70)
    Cover MaterialPolycarbonate
    Base MaterialReinforced Polycarbonate
    Class T Fuses Available110-400 Amperes DC
    Fuse Mounting BlocksTin-Plated Copper

  • The fuse system recommended by most inverter manufacturers for high speed response to short circuits
  • Clear insulating cover, satisfies ABYC/USCG requirements
  • For use on systems up to 160 Volts DC
  • Large 5/16" stud terminals accept ring terminals for wire up to 4/0 AWG
  • Large heat dissipating tin-plated copper mounting blocks
  • Two # 8 accessory terminals located on each end

    • Blow Delay Curve

    BLS5003   

    $57.33
       
    Quantity in Basket: none     		Fuse Block ANL 325-750 Amp



    ANL 750 Fuse Block


    Weight Lb (Kg)1.45 (0.66)
    Fuse Mounting BlocksTin-Plated Copper
    Maximum Amperage750 Amperes DC
    Base MaterialReinforced Polycarbonate
    Recommended Torque132 in-lb (14.9 N-m)
    Maximum Voltage Rating32 Volts DC
    Cover MaterialPolycarbonate

  • 750 Amperes rating achieved with large heat dissipating tin-plated copper mounting blocks
  • Clear insulating cover satisfies ABYC/USCG requirements
  • For use on systems up to 32 Volts DC
  • Large terminals accept 5/16" or M8 ring terminals up to 4/0 AWG
  • Insulating cover satisfies ABYC/USCG requirements and cover breakouts allow access in any direction
  • For use on systems up to 32 Volts DC
  • Large 5/16"-18 studs accept 5/16" (M8) ring terminals, 14 AWG to 2/0 AWG wire
  • Swing out design allows replacement of the fuse without removing fasteners
  • Stainless steel studs provide resistance to corrosion and high torquing for excellent electrical contact
  • UL 94-V0 base resists high heat
  • Insert molded studs ensure secure fuse mounting
  • Cover breakouts allow wire access in any direction

  • Blow Delay Curve

    • BLS5005   

    $20.95
       
    Quantity in Basket: none     		Fuse Block ANL 50-300 Amp



    ANL 300 Fuse Block with Cover


    Fuse Mounting BlocksTin-Plated Copper
    Base MaterialReinforced Polycarbonate
    Weight Lb (Kg)0.35 (0.16)
    Recommended Torque132 in-lb (14.9 N-m)
    Maximum Voltage Rating32 Volts DC
    Maximum Amperage300 Amperes DC
    Cover MaterialPolycarbonate

  • Insulating cover satisfies ABYC/USCG requirements and cover breakouts allow access in any direction
  • For use on systems up to 32 Volts DC
  • Large 5/16"-18 studs accept 5/16" (M8) ring terminals, 14 AWG to 2/0 AWG wire
  • Swing out design allows replacement of the fuse without removing fasteners
  • Stainless steel studs provide resistance to corrosion and high torquing for excellent electrical contact
  • UL 94-V0 base resists high heat
  • Insert molded studs ensure secure fuse mounting
  • Cover breakouts allow wire access in any direction

  • Blow Delay Curve

    • BLS5006   

    $21.95
       
    Quantity in Basket: none     		Fuse Block MAXI 30-80 Amp



    Fuse Block MAXI 30-80 Amp


    Base MaterialReinforced Polycarbonate
    Fuse TypeMAXI Fuses
    Fuse Rating30-80 Amperes
    Maximum Voltage Rating32 Volts DC
    Maximum Amperage80 Amperes

  • The most economical fuse block for 30-80 Ampere fusing
  • Snap-on terminal cover insulates all conductive parts, satisfying ABYC/USCG requirements
  • Accepts wire sizes 18-4 AWG from sides or bottom
  • For use on systems up to 32 Volts DC
  • Ring termnal screws compress fuse blades within blocks for extremely low resistance connections
  • Accepts MAXI Fuses

    • Blow Delay Curve

    BLS5015   

    $33.95
       
    Quantity in Basket: none     		Fuse Block 3AG 6 circuit with ground



    ST Glass Fuse Block with Negative Bus


    Screw Terminal# 8-32 with Captive Star Lockwasher
    AGC/MDL Fuses1/8 to 30 Amperes
    Base MaterialReinforced Polycarbonate
    Weight Lb (Kg)0.55 (0.25)
    Maximum Voltage Rating32 Volts DC
    Maximum Amperage per Block100 Amperes
    Maximum Amperage Per Circuit30 Amperes
    Cover MaterialPolycarbonate

  • Clear insulating cover with label recesses for accept Large Format Labels
  • Cover insulates all conductive parts, satisfying ABYC/USCG requirements and storing spare fuses
  • Tin-plated copper buses and Phosphor Bronze fuse clips give 30 Ampere rating per circuit
  • Accepts AGC (Fast Acting), MDL (Time-Delay) and all other 3AG Glass Fuses



    •

    BLS5025   

    $39.95 Sorry, This Item is No Longer Available.
    Quantity in Basket: none     		Fuse Block ST Blade 6 circuit with ground



    ST* Blade Fuse Block With Cover - 6 Circuit with Negative Bus


    Maximum Amperage Per Circuit30 Amperes
    Weight Lb (Kg)0.55 (0.25)
    Cover MaterialPolycarbonate
    Maximum Amperage per Block100 Amperes
    Maximum Voltage Rating32 Volts DC
    ATO/ATC Fuses Available1 to 30 Amperes
    Base MaterialReinforced Polycarbonate

  • Clear insulating cover with label recesses accept Small Format Labels
  • Cover Satisfies ABYC/USCG requirements for insulation
  • Tin-plated copper buses and fuse clips give 30 Amperes rating per circuit
  • Accepts ATO and ATC fast acting blade fuses
  • 20 write-on circuit labels included
  • Tin-plated copper buses and fuse clips give 30 Amperes rating per circuit
  • Accepts ATO and ATC fast acting blade fuses

    • Blow Delay Curve

    BLS5026   

    $47.95
       
    Quantity in Basket: none     		Fuse Block ST Blade 12 circuit with ground



    ST*Blade Fuse Block With Cover - 12 Circuit with Negative Bus


    Maximum Amperage Per Circuit30 Amperes
    Weight Lb (Kg)0.75 (0.34)
    Cover MaterialPolycarbonate
    Maximum Amperage per Block100 Amperes
    Maximum Voltage Rating32 Volts DC
    ATO/ATC Fuses Available1 to 30 Amperes
    Base MaterialReinforced Polycarbonate

  • Clear insulating cover with label recesses accept Small Format Labels
  • Cover Satisfies ABYC/USCG requirements for insulation
  • Tin-plated copper buses and fuse clips give 30 Amperes rating per circuit
  • Accepts ATO and ATC fast acting blade fuses
  • 20 write-on circuit labels included
  • Tin-plated copper buses and fuse clips give 30 Amperes rating per circuit
  • Accepts ATO and ATC fast acting blade fuses

    • Blow Delay Curve

    BLS5028   

    $32.90
       
    Quantity in Basket: none     		Fuse Block ST Blade 6 circuit



    ST Blade Fuse Block With Cover - 6 Circuit without Negative Bus


    Weight Lb (Kg)0.42 (0.19)
    Maximum Amperage Per Circuit30 Amperes
    Cover MaterialPolycarbonate
    Maximum Amperage per Block100 Amperes
    Maximum Voltage Rating32 Volts DC
    ATO/ATC Fuses Available1 to 30 Amperes
    Base MaterialReinforced Polycarbonate

  • Clear insulating cover with label recesses accept Small Format Labels
  • Cover Satisfies ABYC/USCG requirements for insulation
  • Tin-plated copper buses and fuse clips give 30 Amperes rating per circuit
  • Accepts ATO and ATC fast acting blade fuses
  • 20 write-on circuit labels included
  • Tin-plated copper buses and fuse clips give 30 Amperes rating per circuit
  • Accepts ATO and ATC fast acting blade fuses

    • Blow Delay Curve